iBall Tarang 2.1 USB with Remote Full Wood Speaker User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your iBall Tarang 2.1 USB with Remote Full Wood Speaker system. Please read this manual thoroughly before using the product and retain it for future reference.

The iBall Tarang 2.1 speaker system is designed to deliver clear and detailed audio with multiple input options, including USB, SD/MMC cards, and PC/laptop connectivity. It features wooden cabinets for enhanced sound quality and comes with a remote control for convenient operation.

2. Safety Information

• Ensure the power supply voltage matches the requirements specified on the speaker unit.
• Do not expose the unit to rain, moisture, or extreme temperatures.
• Avoid placing the speakers near heat sources or in direct sunlight.
• Do not open the speaker cabinets. Refer all servicing to qualified personnel.
• Keep the unit away from strong magnetic fields.
• Clean the unit only with a dry, soft cloth.

3. Package Contents

• 1 x iBall Tarang 2.1 Subwoofer Unit
• 2 x Satellite Speakers
• 1 x Remote Control
• 1 x Audio Input Cable (3.5mm to RCA)
• 1 x User Manual (this document)

4. Product Overview

The iBall Tarang 2.1 speaker system consists of a central subwoofer unit and two satellite speakers, along with a remote control for convenient operation.

Figure 1: iBall Tarang 2.1 Speaker System Components

This image displays the complete iBall Tarang 2.1 speaker system. In the center is the main subwoofer unit, featuring control buttons on its front panel, including Standby, Mode, Play/Pause, and Previous/Next/Volume controls. Below these buttons are the SD card slot and USB port. To the left and right of the subwoofer are the two compact satellite speakers. A black remote control with multiple buttons is positioned in the foreground, to the right of the subwoofer.

4.1 Subwoofer Unit

The subwoofer unit houses the main amplifier, power supply, and controls. It features a 4.5-inch full-range driver for deep bass. The front panel includes:

• Standby Button: To power on/off the unit.
• Mode Button: To switch between input sources (USB, SD/MMC, AUX/PC, Bluetooth if available).
• Play/Pause Button: For media playback control in USB/SD mode.
• Previous/Volume Down Button: Short press for previous track, long press for volume down.
• Next/Volume Up Button: Short press for next track, long press for volume up.
• USB Port: For connecting USB flash drives.
• SD/MMC Card Slot: For inserting SD or MMC memory cards.

4.2 Satellite Speakers

The two satellite speakers are compact and feature 3-inch full-range drivers, designed to deliver clear mid-range and high-frequency audio. They connect to the subwoofer unit.

4.3 Remote Control

The remote control provides convenient access to all primary functions from a distance, including power, mode selection, volume adjustment, and track navigation.

5. Setup Instructions

1. Placement: Position the subwoofer on a stable surface, preferably on the floor or a sturdy desk. Place the satellite speakers on either side of your listening area, ensuring they are facing you for optimal stereo separation.
2. Connect Satellite Speakers: Connect the cables from the satellite speakers to the corresponding output jacks on the rear panel of the subwoofer unit. Ensure a secure connection.
3. Connect Audio Source:
   • For PC/Laptop/Mobile (AUX): Use the provided 3.5mm to RCA audio cable. Connect the 3.5mm jack to your device's headphone/audio output and the RCA plugs to the "AUDIO INPUT" jacks on the subwoofer's rear panel.
   • For USB Drive: Insert a USB flash drive into the USB port on the front panel of the subwoofer.
   • For SD/MMC Card: Insert an SD or MMC memory card into the SD/MMC card slot on the front panel of the subwoofer.
4. Connect Power: Plug the power cord of the subwoofer unit into a standard AC power outlet.
5. Power On: Press the "Standby" button on the front panel of the subwoofer or on the remote control to turn on the speaker system.

6. Operating Instructions

6.1 Selecting Input Mode

Press the "Mode" button on the subwoofer's front panel or on the remote control to cycle through available input sources: AUX (PC/Laptop), USB, SD/MMC, and Bluetooth (if applicable to your model).

6.2 Volume Control

• On Subwoofer: Long press the "Next/Volume Up" button to increase volume, and long press the "Previous/Volume Down" button to decrease volume.
• On Remote Control: Use the dedicated Volume Up (+) and Volume Down (-) buttons.

6.3 Media Playback (USB/SD/MMC Mode)

• Play/Pause: Press the "Play/Pause" button on the subwoofer or remote to start or pause playback.
• Next Track: Short press the "Next/Volume Up" button on the subwoofer or the "Next" button on the remote.
• Previous Track: Short press the "Previous/Volume Down" button on the subwoofer or the "Previous" button on the remote.
• Folder Navigation: The remote control may include dedicated buttons for navigating folders on USB/SD media.

7. Maintenance

• Cleaning: Use a soft, dry cloth to wipe the surfaces of the speakers. Do not use liquid cleaners or abrasive materials.
• Ventilation: Ensure the subwoofer's ventilation ports are not blocked to prevent overheating.
• Storage: If storing the unit for an extended period, disconnect it from power and store it in a cool, dry place.

8. Troubleshooting

9. Specifications

Note: Specifications are subject to change without prior notice.

10. Warranty and Support

This iBall Tarang 2.1 USB with Remote Full Wood Speaker comes with a 1-Year Warranty from the date of purchase. Please retain your purchase receipt as proof of warranty.

The warranty covers manufacturing defects. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

For technical support or warranty claims, please contact iBall customer service. Contact details can typically be found on the iBall official website or on the product packaging.