1. Product Overview
The Saxby Omega Bathroom Mirror is a modern, energy-efficient lighting solution designed for bathroom environments. It integrates a 1W LED light, a motion sensor for convenient operation, and a built-in shaver socket, all within a mirrored glass and matt silver frame. This product also features a practical shelf for bathroom essentials.
Figure 1: Front view of the Saxby Omega Bathroom Mirror, showcasing its sleek design, integrated LED lights at the top, and a glass shelf with a shaver socket below.
2. Safety Information
Please read all instructions carefully before installation and use. Retain this manual for future reference.
- Electrical Safety: Installation must be carried out by a qualified electrician in accordance with current wiring regulations (e.g., IEE Wiring Regulations). Ensure the mains supply is switched off at the consumer unit/fuse board before commencing installation or maintenance.
- Bathroom Zones: This product is rated IP44, making it suitable for bathroom zone 2. It can be used in bathroom zone 1 if installed in conjunction with a 30mA RCD (Residual Current Device). Do not install in zone 0.
- Handling: The mirror is made of glass. Handle with care to prevent breakage and injury.
- Cleaning: Always disconnect power before cleaning. Use only a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Ventilation: Ensure adequate ventilation around the unit as per installation guidelines.
Figure 2: Close-up view highlighting the IP44 rating and the integrated shaver socket, indicating suitability for specific bathroom zones.
3. Package Contents
Verify that all components are present and undamaged before beginning installation.
- Saxby Omega Bathroom Mirror Unit (with integrated LED, motion sensor, shaver socket, and shelf)
- Installation Fixings (screws, wall plugs)
- Instruction Manual
4. Setup and Installation
Installation should only be performed by a qualified electrician. Ensure the mounting surface is suitable to support the weight of the mirror (approximately 6.95 kg).
- Preparation: Switch off the main electrical supply at the consumer unit/fuse board. Identify the desired mounting location, ensuring it is within the appropriate bathroom zone and away from direct water spray.
- Marking: Carefully mark the drilling points on the wall using the mirror's mounting brackets as a template.
- Drilling: Drill holes at the marked points, ensuring not to damage any hidden wiring or pipes. Insert appropriate wall plugs.
- Wiring: Connect the mirror's electrical wiring to the mains supply according to the wiring diagram provided with the product and local electrical regulations. Ensure all connections are secure and insulated.
- Mounting: Secure the mirror to the wall using the provided fixings. Ensure it is level and firmly attached.
- Final Check: Once installed, switch the main electrical supply back on and test the mirror's functions.
Figure 3: Side profile of the mirror illustrating its projection from the wall and the location of the shaver socket. Dimensions are H: 500mm, W: 390mm, Proj: 160mm.
5. Operating Instructions
- LED Lighting: The mirror features integrated 1W LED lights (2 x 1W LED capsule, cool white). These lights are activated by the motion sensor.
- Motion Sensor (IR Switch): The mirror is equipped with an infrared (IR) motion sensor. To activate the light, simply wave your hand within the sensor's detection range (typically 5-10 cm) in front of the sensor area. Wave again to turn off the light.
- Shaver Socket: The built-in shaver socket is designed for use with electric shavers and electric toothbrushes. Ensure the appliance is compatible with the socket's voltage and current rating before use. Do not use for high-power appliances.
- Integrated Shelf: The glass shelf provides a convenient storage space for small bathroom items. Do not overload the shelf.
6. Maintenance
Regular maintenance will ensure the longevity and appearance of your mirror.
- Cleaning the Mirror: Disconnect power before cleaning. Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray cleaner onto the cloth, not directly onto the mirror surface, to avoid liquid ingress into electrical components.
- Cleaning the Shelf: The glass shelf can be cleaned with a damp cloth and mild detergent. Dry thoroughly.
- General Care: Do not use harsh chemicals, abrasive materials, or scouring pads, as these can damage the mirror finish or electrical components.
Figure 4: Detail of the integrated glass shelf and the robust construction from glass and steel materials.
7. Troubleshooting
If you encounter issues with your Saxby Omega Mirror, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; Sensor obstructed or faulty; LED failure. | Check main power supply. Ensure sensor area is clear. If problem persists, consult a qualified electrician. |
| Motion sensor is unresponsive. | Sensor dirty or obstructed; Incorrect hand movement; Electrical issue. | Clean sensor area. Ensure a clear, deliberate hand wave. Check power supply. |
| Shaver socket not working. | No power; Appliance incompatibility; Internal wiring issue. | Check main power. Verify appliance works in another socket. Ensure appliance is suitable for shaver socket. If problem persists, consult a qualified electrician. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 39237 |
| Product Dimensions | H: 500mm (19.7 inches) W: 390mm (15.4 inches) Proj: 160mm (6.3 inches) |
| Item Weight | 6.95 kg (15.32 lbs) |
| Light Source | 2 x 1W LED (Capsule) Cool white (Included) |
| Finish Type | Mirrored glass & matt silver paint |
| Material | Glass and Steel |
| Special Features | LED Motion Sensor, Shaver Socket, Shelf |
| IP Rating | IP44 (Suitable for bathroom zone 2, or zone 1 with 30mA RCD) |
| Mounting Type | Wall Mount |
| Assembly Required | No |
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact Saxby Lighting directly through their official website or customer service channels. Keep your proof of purchase for any warranty claims.
Official Website: www.saxbylighting.com
