Introduction
Thank you for choosing the IPS 89267 WaterTite Standard Washing Machine Outlet Box Trim Plate. This product is designed to provide a clean, finished appearance for your washing machine outlet box, covering the rough opening and protecting the plumbing connections. This manual provides essential information for the proper installation, use, and maintenance of your trim plate.
Safety Information
- Always ensure that water supply valves to the washing machine are turned off before performing any work on or around the outlet box.
- If the outlet box contains electrical outlets, ensure power is disconnected at the circuit breaker before installation or maintenance.
- This trim plate is for cosmetic and protective purposes. It does not replace or repair any functional plumbing or electrical components of the outlet box.
- Keep small parts away from children to prevent choking hazards.
Package Contents
Verify that all components are present before beginning installation:
- 1 x IPS 89267 Washing Machine Outlet Box Trim Plate
Note: Mounting screws or adhesive may be required for secure installation, depending on the existing outlet box design. These are typically not included with the trim plate.
Installation
This trim plate is designed to fit over an existing washing machine outlet box. Ensure the area is clean and dry before installation.
Tools Required (Not Included):
- Screwdriver (if using screws)
- Caulk gun and sealant (optional, for sealing edges)
- Cleaning cloth
Installation Steps:
- Prepare the Area: Ensure the existing washing machine outlet box is clean, free of debris, and that all plumbing connections (hot/cold water lines, drain hose) are securely in place and not leaking.
- Position the Trim Plate: Carefully align the IPS 89267 trim plate over the opening of the existing washing machine outlet box. Ensure the cutouts for the water valves and drain hose are correctly oriented.
- Secure the Trim Plate:
- Snap-on Installation: If your existing outlet box has clips or a design for a snap-on cover, gently press the trim plate into place until it securely snaps onto the box.
- Screw-on Installation: If your existing outlet box has screw holes, align the trim plate's holes (if present) with those on the box. Insert appropriate screws (not included) and tighten them until the trim plate is firmly attached. Do not overtighten.
- Adhesive/Caulk Installation (Optional): For a more permanent or sealed installation, a bead of appropriate adhesive or caulk can be applied to the back perimeter of the trim plate before pressing it into place, or along the edges after installation.
- Final Check: Once installed, ensure the trim plate is flush against the wall and securely attached. Verify that there is no interference with the washing machine hoses or valves.
Image: The IPS 89267 WaterTite Standard Washing Machine Outlet Box Trim Plate. This image shows the white plastic trim plate designed to cover the rough opening of a washing machine outlet box, featuring cutouts for hot and cold water valves and a central drain hose opening.
Usage
The IPS 89267 trim plate provides a finished look for your washing machine connections. Once installed, you can connect your washing machine's hot and cold water supply hoses to the valves within the box and route the drain hose into the standpipe. The trim plate helps to conceal the plumbing and protect the connections from accidental bumps or damage.
Maintenance
Maintaining your trim plate is simple:
- Cleaning: Wipe the surface of the trim plate with a soft, damp cloth and mild soap as needed to remove dust or grime. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Inspection: Periodically check the trim plate for any signs of damage, cracks, or loosening. Ensure it remains securely attached to the outlet box.
- Leak Check: While the trim plate itself does not prevent leaks, regularly inspect the plumbing connections within the outlet box for any signs of drips or moisture. Address any leaks promptly.
Troubleshooting
Most issues related to the trim plate are minor and easily resolved.
| Problem | Possible Cause | Solution |
|---|---|---|
| Trim plate does not fit | Incorrect size or incompatible outlet box. | Verify the dimensions of your existing outlet box against the specifications provided in this manual. This trim plate is designed for standard boxes. |
| Trim plate is loose | Improper installation or missing fasteners. | Re-check installation steps. If using screws, ensure they are tightened. If using a snap-on design, ensure it is fully engaged. Consider using a small amount of sealant or adhesive for added security. |
| Gaps around the trim plate | Uneven wall surface or slight size discrepancy. | Apply a bead of paintable caulk around the edges of the trim plate to seal any gaps and provide a finished look. |
Specifications
- Model Number: 89267
- Brand: IPS
- Exterior Finish: Stainless Steel (Note: Product may be made of durable plastic with a finish resembling stainless steel, or be white plastic as per some user feedback. Refer to product packaging for exact material.)
- Color: White
- Approximate Inside Dimensions: 7.5 inches (width) x 5.625 inches (height)
- Approximate Outside Dimensions: 10.125 inches (width) x 8.875 inches (height)
- Item Weight: 3.84 ounces
- UPC: 012181892671
Warranty Information
IPS products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official IPS website. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance, or need to report a problem with your IPS 89267 WaterTite Standard Washing Machine Outlet Box Trim Plate, please contact IPS customer support through their official website or the contact information provided on your product packaging.
