1. Introduction
This manual provides essential instructions for the safe installation, proper care, and maintenance of your Sunlite 50703-SU 1-Gang Decorative Steel Switch and Receptacle Plate. Designed for durability and aesthetic appeal, this wall plate is intended to cover a single Decora-style switch or receptacle.
2. Safety Information
- Electrical Hazard: Always turn off power at the circuit breaker or fuse box before attempting any electrical installation or maintenance. Failure to do so can result in serious injury or death.
- If you are unsure about any part of the installation process, consult a qualified electrician.
- This product is designed for indoor use only.
- Do not use this product if it appears damaged.
3. Package Contents
- One (1) Sunlite 50703-SU 1-Gang Decorative Steel Switch and Receptacle Plate
- Two (2) Color-Matched Mounting Screws
4. Setup and Installation
Follow these steps to safely install your new wall plate:
- Turn Off Power: Locate the circuit breaker or fuse box that controls the power to the switch or receptacle you are working on. Turn off the power completely. Verify that the power is off using a voltage tester.
- Remove Old Wall Plate: Carefully unscrew and remove the existing wall plate.
- Position New Wall Plate: Align the Sunlite 50703-SU decorative wall plate over the switch or receptacle opening. Ensure the plate is level.
- Secure Wall Plate: Use the two included color-matched screws to fasten the wall plate to the electrical box. Do not overtighten the screws, as this can damage the plate or the electrical box.
- Restore Power: Once the wall plate is securely installed, restore power at the circuit breaker or fuse box.
Front view of the Sunlite 50703-SU 1-Gang Decorative Steel Wall Plate, showcasing its brushed steel finish and single opening for a Decora-style switch or receptacle.
Informational graphic detailing the Sunlite 1-Gang Decorative Steel Wall Plate. It highlights key features such as 1-Gang cover plate, durable steel construction, easy installation, and UL listing, along with its dimensions of 4.6 inches high and 2.8 inches wide.
5. Operation
Once installed, the Sunlite 50703-SU wall plate serves as a protective and decorative cover for your electrical switch or receptacle. No operational steps are required for the wall plate itself.
6. Maintenance and Care
- To clean the wall plate, use a soft, damp cloth.
- Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Regular cleaning will help maintain the plate's appearance and prevent dust accumulation.
7. Troubleshooting
- Plate Does Not Fit: Ensure that the electrical box is a standard 1-gang size and that the switch or receptacle is Decora-style.
- Screws Do Not Align: Check the alignment of the electrical box and the device (switch/receptacle). Adjust if necessary. Do not force screws.
- Scratches or Damage: If the plate is scratched or damaged during installation, it may need to be replaced.
8. Specifications
| Attribute | Detail |
|---|---|
| Model Number | 50703-SU |
| Brand | Sunlite |
| Material | Steel |
| Color | Steel (Brushed) |
| Configuration | 1-Gang (Single) |
| Product Dimensions (W x H) | 2.8 inches x 4.6 inches |
| Item Weight | 0.8 ounces |
| Installation Type | Screw-In |
| Included Components | Screws |
| Certifications | UL Listed |
9. Warranty Information
For detailed warranty information regarding your Sunlite 50703-SU Decorative Steel Switch and Receptacle Plate, please refer to the product packaging or contact Sunlite customer service.
10. Support
For further assistance, product inquiries, or to explore other Sunlite products, please visit the official Sunlite store:
