Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Edifier Exclaim Bi-Amped 2.0 Speaker System (e10). Please read this manual thoroughly before using the product to ensure proper function and longevity.
The Edifier Exclaim e10 is a fully active bi-amped 2.0 speaker system designed for high-performance audio. Each speaker is driven by its own internal amplifier, featuring integral DSP (Digital Signal Processing) and DRC (Dynamic Range Compensation) for optimal sound quality. A combined 36 watts RMS of power drives a total of 6 internal active speakers. Additionally, passive radiators are utilized in both the midrange/tweeter housings and the woofers to enhance efficiency and dynamic range, augmenting deep bass performance.
Package Contents
Before proceeding with the setup, please verify that all components are present:
- Edifier Exclaim e10 Speaker System (Left and Right Speakers)
- 3.5mm Auxiliary Audio Cable
- Speaker Connection Cable
- Power Adapter
Product Overview
Figure 1: Front view of the Edifier Exclaim e10 speaker system, showcasing its unique design with tall, slender top sections and spherical bases.
Figure 2: Side view of the Edifier Exclaim e10 speakers, highlighting the control buttons on the master speaker.
Figure 3: Rear view of the master Edifier Exclaim e10 speaker, showing the input ports for power, auxiliary audio, and the connection to the slave speaker.
Figure 4: Diagram illustrating the dimensions of the Edifier Exclaim e10 speaker system, with a height of 12.2 inches, depth of 7.09 inches, and width of 4.13 inches.
Setup Instructions
- Placement: Position the left and right speakers on a stable, flat surface, ensuring they are equidistant from your listening position for optimal stereo imaging. Avoid placing them too close to walls or corners, which can affect bass response.
- Connect Speakers: Connect the master speaker (the one with controls) to the slave speaker using the provided speaker connection cable. The connection port is located on the rear of both speaker bases.
- Connect Audio Source:
- For 3.5mm Auxiliary Input: Use the included 3.5mm auxiliary cable to connect your audio source (e.g., computer, smartphone, tablet) to the "AUX" input port on the rear of the master speaker.
- Connect Power: Plug the power adapter into the power input port on the rear of the master speaker, then plug the adapter into a wall outlet.
- Power On: Press the power button located on the side of the master speaker. The indicator light will illuminate.
Operating Instructions
- Power On/Off: Press the power button on the side of the master speaker to turn the system on or off.
- Volume Adjustment: Use the '+' and '-' buttons on the side of the master speaker to increase or decrease the volume.
- Input Selection: The Edifier Exclaim e10 primarily uses the 3.5mm auxiliary input. Ensure your audio source is connected via the 3.5mm cable.
- Audio Playback: Start playing audio from your connected device. Adjust the volume on both your device and the speakers to a comfortable listening level.
Figure 5: A close-up view of the volume and power control buttons located on the side of the master speaker.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker surfaces. Do not use liquid cleaners or aerosols, as they may damage the finish or internal components.
- Storage: When not in use for extended periods, store the speakers in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the speakers with care. Avoid dropping them or subjecting them to strong impacts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound |
|
|
| Distorted sound |
|
|
| One speaker not working |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | e10 |
| Total Power Output | RMS 8W x 2 + 10W x 2 (DRC on) (Total 36 Watts) |
| Frequency Response | 48Hz-20kHz |
| Signal to Noise Ratio | ≥85dBA |
| Input Sensitivity | R/L: 700±50mV | SW: 250±50mV |
| Midrange/Tweeter Unit | 1-1/2 inch (40mm), Magnetically shielded, 8-Ohms |
| Bass Unit | 3 inch (82mm), Magnetically shielded, 6-Ohms |
| Audio Input | Auxiliary 3.5mm |
| Product Dimensions (LxWxH) | 7.09"D x 4.13"W x 12.2"H |
| Item Weight | 5.29 pounds |
| Power Source | Corded Electric (12 Volts) |
Warranty and Support
Warranty Information: The product comes with a Full Warranty. For specific terms and conditions, please refer to the warranty card included with your purchase or contact Edifier customer service.
Customer Support: For technical assistance, troubleshooting, or warranty claims, please visit the official Edifier website or contact their customer support directly. You can find more information and support resources by visiting the Edifier Store on Amazon.
