1. Product Overview
The Andover CoFlex Self-Adhesive Compression Bandage Wrap LF2 is a versatile, latex-free cohesive bandage designed for various applications requiring compression and support. Its unique self-adhering properties eliminate the need for clips or fasteners, providing secure and comfortable wear.
Figure 1: Andover CoFlex Self-Adhesive Compression Bandage Wrap LF2 (Tan, 3" x 5 yd)
This image displays a roll of the Andover CoFlex self-adhesive compression bandage. The bandage is tan in color and has a textured, woven appearance, indicating its cohesive nature. The roll is cylindrical, showing the tightly wound material.
2. Key Features
- Self-Adherent Closure: Clings to itself without the need for tape, clips, or fasteners.
- Latex-Free (LF2): Suitable for individuals with latex sensitivities.
- High Tensile Strength: Offers 20 lbs. tensile strength for reliable compression and support.
- EasyTear Patented Technology: Allows for tearing by hand, eliminating the need for scissors.
- CellularFoam Patented Technology: Provides a long-lasting cohesive bond.
- Versatile Application: Can be used over wet dressings and remains securely in place.
- Comfortable Wear: Lightweight and non-irritating for extended use.
3. Preparation and Application
3.1. Preparation
- Clean the Area: Ensure the skin or wound area where the bandage will be applied is clean and dry. If applying over a dressing, ensure the dressing is properly in place.
- Determine Length: Unroll a small section of the bandage and estimate the required length. Remember that the bandage is self-adhering and will stretch slightly during application.
3.2. Application
- Tear to Size: Using the EasyTear technology, tear the bandage to the appropriate size. No scissors are needed.
- Apply Directly: Begin wrapping the bandage around the desired area, ensuring a slight overlap with each turn. Apply with even tension to achieve the desired compression level.
- Secure in Place: Press the end of the bandage firmly against the wrapped portion. The cohesive material will stick to itself, securing the bandage without additional fasteners.
Note: Do not apply too tightly, as this may restrict circulation. Monitor the area for signs of discomfort, numbness, or discoloration.
4. Maintenance and Removal
4.1. Maintenance
The CoFlex bandage is designed for single-use applications. Once applied, it should remain secure. If the bandage becomes loose or soiled, it should be replaced.
4.2. Removal
To remove, simply unwrap the bandage from the applied area. It will peel away from itself without sticking to skin or hair, minimizing discomfort.
5. Troubleshooting
- Bandage not sticking: Ensure the bandage is applied to itself with sufficient overlap. The surface should be clean and dry for optimal adhesion.
- Bandage too tight/loose: Adjust the tension during application. If too tight, remove and reapply with less tension. If too loose, remove and reapply with more tension and overlap.
- Skin irritation: While designed to be non-irritating and latex-free, discontinue use if skin irritation occurs and consult a healthcare professional.
6. Specifications
| Brand | Andover |
| Model | CoFlex LF2 |
| Material | Foam, Cohesive |
| Size | 3 inches x 5 yards |
| Tensile Strength | 20 lbs. |
| Sterility Rating | Non-Sterile |
| Latex Free | Yes |
| Item Form | Foam |
7. Safety Information and Legal Disclaimer
This product is intended for external use as a self-adhesive compression bandage. It is not intended to diagnose, treat, cure, or prevent any disease or health condition. Always consult a healthcare professional for medical advice or if you have concerns about a wound or injury.
Important: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is not a dietary supplement.
8. Warranty and Support
Specific warranty information for the Andover CoFlex Self-Adhesive Compression Bandage Wrap LF2 is not provided in this manual. For inquiries regarding product support, defects, or further information, please contact Andover customer service directly through their official website or the retailer from whom the product was purchased.
