Beldray 1500W Steam Mop Green User Manual

Introduction

Thank you for purchasing the Beldray 1500W Steam Mop. This manual provides important information regarding the safe operation, maintenance, and troubleshooting of your steam mop. Please read this manual thoroughly before first use and retain it for future reference.

Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Do not immerse the appliance in water or any other liquid.
• Do not leave the steam mop unattended while plugged in.
• Keep out of reach of children.
• Use only as described in this manual.
• Do not use on unsealed wooden floors or floors that are sensitive to heat and moisture.
• Always unplug the appliance when not in use and before cleaning.

Product Components

Overall View: The Beldray 1500W Steam Mop in its upright position, showcasing its sleek design and green accents.

Side Profile: A view of the steam mop from the side, highlighting the water tank and handle design.

Ergonomic Handle: Close-up of the comfortable, green handle designed for easy grip and control during cleaning.

Microfiber Cleaning Cloth: One of the two included washable microfiber cloths, designed to attach to the mop head for effective cleaning.

Carpet Glider: The carpet glider attachment, used to refresh carpets and rugs with steam.

Setup

1. Assemble the Mop: Connect the handle to the main body of the steam mop until it clicks into place.
2. Attach Cleaning Cloth: Securely attach a clean microfiber cleaning cloth to the mop head. Ensure it covers the entire base.
3. Fill Water Tank: Using the provided funnel, fill the water tank with distilled or de-mineralized water. Do not overfill. The tank capacity is designed for approximately 20 minutes of continuous steaming.
4. Plug In: Plug the power cord into a suitable electrical outlet.

Ready for Use: The steam mop assembled and prepared for operation, showing the mop head with a cleaning cloth attached.

Operating Instructions

1. Power On: Once plugged in, the steam mop will begin to heat up. It heats up in under 30 seconds.
2. Steam Activation: The steam will be generated automatically once the unit is heated. There is no separate steam button.
3. Cleaning Hard Floors: Glide the mop slowly and evenly over the floor surface. The 130-degree Celsius steam and 0.5 bar pressure will effectively clean and sanitize.
4. Using Carpet Glider: For refreshing carpets, attach the carpet glider over the mop head with the cleaning cloth. Move the mop back and forth over the carpet. This is for refreshing only, not deep cleaning.
5. Refilling: If steam production stops, unplug the unit and allow it to cool before refilling the water tank.
6. Power Off: When finished, unplug the steam mop from the electrical outlet.

In Operation: The Beldray steam mop being used on a tiled floor, demonstrating its ease of movement and effective cleaning.

Maintenance

• Cleaning Cloths: The microfiber cleaning cloths are washable. Remove them after each use and wash them according to their care instructions.
• Water Tank: Empty any remaining water from the tank after each use.
• Storage: Store the steam mop in a cool, dry place. Ensure the power cord is neatly wrapped.
• Descaling: If you notice a decrease in steam production, the unit may require descaling. Consult the manufacturer's website for specific descaling instructions, as this is not detailed in the product description.

Troubleshooting

Specifications

• Model: B009T5TYR2
• Brand: Beldray
• Power: 1500W
• Weight: Approximately 3 lbs (1.36 kg)
• Heat-up Time: Under 30 seconds
• Working Time: Up to 20 minutes (per full tank)
• Steam Pressure: 0.5 Bar
• Steam Temperature: 130°C (266°F)
• Included Accessories: 2 x Cleaning Cloths, 1 x Funnel, 1 x Carpet Glider
• Date First Available: December 10, 2013

Customer Support

For further assistance, warranty information, or to purchase replacement parts, please visit the official Beldray website or contact their customer service department. Refer to your product packaging for specific contact details.