ABUS 26/70 Diskus Padlock Instruction Manual

1. Product Overview and Features

The ABUS 26/70 Diskus Padlock is engineered for high-security applications, particularly for storage of valuable items. Its unique Diskus design minimizes exposure of the shackle, offering enhanced resistance against common attack methods.

• Dimensions: Lock width: 2.75in (70mm), Height: 2.75in (70mm), Depth: 1.19in (30.2mm), Horizontal Clearance: 0.75in (19.1mm), Vertical Clearance: 0.7in (17.1mm), Shackle Diameter: 0.39in (9.9mm).
• Keying: Supplied with 2 unique keys (keyed different). The lock features a key-retaining mechanism, meaning the key is required for locking.
• Applications: Suitable for securing storage units, transport containers, and commercial properties. The closed shackle design provides security against prying and tampering.
• Durability: Constructed from solid stainless steel, minimizing vulnerabilities and offering protection against environmental elements and tampering. The shackle is made from special alloy hardened steel.
• Security Technology: Features Diskus Deep-Welding Technology for maximum strength and pry resistance. The original Diskus design includes 360-degree drilling and pulling protection, with a welded seam for high break resistance. The cylinder is drill and pull resistant.

2. Product Images

3. Product Videos

4. Setup

1. Unpacking: Carefully remove the padlock and keys from the packaging. Inspect for any visible damage.
2. Key Identification: Each padlock comes with two unique keys. Keep one key in a safe, accessible location and the other as a spare. Note that this padlock is key-retaining, meaning the key must be inserted and turned to lock the shackle.
3. Initial Test: Before deployment, insert a key into the keyway and turn it clockwise to open the shackle. Ensure the shackle moves freely. Close the shackle and turn the key counter-clockwise to lock it. Remove the key.

5. Operating Instructions

1. To Unlock:
   • Insert the key fully into the keyway.
   • Turn the key clockwise until the shackle springs open.
   • Remove the padlock from the hasp or securing point.
2. To Lock:
   • Position the padlock so the shackle aligns with the locking mechanism (e.g., hasp).
   • Close the shackle firmly.
   • Insert the key into the keyway.
   • Turn the key counter-clockwise until the shackle is securely locked.
   • Remove the key. The padlock is now secured.

6. Maintenance

Regular maintenance ensures the longevity and smooth operation of your ABUS Diskus padlock.

• Lubrication: Periodically apply a small amount of graphite powder or a non-oil-based lubricant specifically designed for locks into the keyway. Avoid using oil-based lubricants as they can attract dirt and debris, potentially jamming the mechanism.
• Cleaning: Wipe the padlock body with a clean, dry cloth to remove dirt and grime. For stubborn dirt, a mild soap solution can be used, followed by thorough drying.
• Oil Residue: As noted in the product information, new padlocks may have a visible oil residue on the surface. This is a protective layer and does not indicate a defect. It can be wiped off if desired.
• Key Care: Keep keys clean and free from bending or damage. Do not force a key if it does not turn smoothly.

7. Troubleshooting

• Key is Sticking or Hard to Turn:
  • Apply a small amount of graphite powder or a specialized lock lubricant into the keyway.
  • Ensure the key is fully inserted before attempting to turn.
  • Check the key for any bends or damage. Use a different key if available.
• Shackle Does Not Open/Close Smoothly:
  • Check for any obstructions around the shackle or within the padlock body.
  • Ensure the key is turned completely to the open or closed position.
  • Lubricate the shackle mechanism as described in the Maintenance section.
• Padlock is Frozen (in cold climates):
  • Use a de-icing spray specifically designed for locks. Avoid using hot water as it can refreeze and cause further issues.
  • Regular lubrication with appropriate products can help prevent freezing.

8. Specifications

9. Warranty & Support

Warranty Information

If an ABUS product fails to work properly due to a manufacturing defect, return it to ABUS postage prepaid, and it will be repaired or replaced at ABUS's discretion. To obtain warranty service, please call 1-800-352-2287 or simply return the padlock prepaid along with the receipt of purchase and all parts and keys (if applicable) to: ABUS Lock Company, 23910 N 19th Ave., Suite 56, Phoenix, AZ 85085-1850. ABUS products are warranted for a specific period of time from the date of purchase. Specific warranty periods appear on the packaging.

Customer Support

For further assistance or inquiries, please contact ABUS customer support:

• Phone: 1-800-352-2287
• Website: Visit the official ABUS website for product information and FAQs.