1. Introduction and Overview
Thank you for purchasing the Eliminator Lighting LED SPOT. This high-output LED pinspot is designed for various lighting applications, offering a focused beam of light with minimal power consumption. This manual provides essential information for the safe and efficient operation of your device.
Key features of the LED SPOT include:
- High Output 1 x 5 Watt White LED
- Includes Hanging Bracket for versatile mounting
- No Duty Cycle, allowing for continuous operation
- Low 5 Watt Power Consumption
- Fixed 5 Degree Beam Angle
- Power Cord included for immediate use
Figure 1: Front view of the Eliminator Lighting LED SPOT, showcasing its compact design and bright LED lens.
2. Safety Instructions
To ensure safe operation, please read and understand all instructions before using this product. Keep this manual for future reference.
- Electrical Safety: Always connect the device to a grounded power outlet. Do not expose the unit to rain or moisture. Disconnect from power before servicing or cleaning.
- Temperature: Operate the device in a well-ventilated area. Avoid blocking ventilation openings. Do not operate in environments exceeding 40°C (104°F).
- Mounting: Ensure the mounting surface or structure is capable of supporting the weight of the fixture. Use the included hanging bracket securely.
- Eye Safety: Do not stare directly into the LED light source, as it can cause eye damage.
- Handling: Avoid dropping or subjecting the unit to severe impact. Do not attempt to repair the unit yourself; refer all servicing to qualified personnel.
3. Package Contents
Upon opening the package, verify that all components are present and in good condition:
- Eliminator Lighting LED SPOT Fixture
- Hanging Bracket (pre-attached or included separately)
- Power Cord
- User Manual (this document)
Figure 2: Side view of the Eliminator Lighting LED SPOT, illustrating the adjustable hanging bracket for mounting.
4. Setup
Follow these steps to set up your LED SPOT fixture:
- Unpacking: Carefully remove the fixture from its packaging. Inspect for any damage that may have occurred during shipping.
- Mounting:
- The LED SPOT comes with a pre-attached hanging bracket.
- Securely attach the bracket to a truss, ceiling, or other stable surface using appropriate mounting hardware (not included). Ensure the mounting point can safely support the fixture's weight.
- Adjust the angle of the fixture by loosening the side knobs on the bracket, positioning the light as desired, and then tightening the knobs firmly.
- Power Connection: Insert the included power cord into the power input on the rear of the LED SPOT fixture. Connect the other end of the power cord to a standard, grounded electrical outlet (120V AC, 60Hz).
- Initial Power-Up: Once connected to power, the LED SPOT will illuminate. There are no complex controls; it is designed for simple plug-and-play operation.
5. Operating Instructions
The Eliminator Lighting LED SPOT is designed for straightforward operation:
- Power On/Off: The unit powers on automatically when connected to an electrical outlet and powers off when disconnected. There is no dedicated power switch.
- Beam Direction: Adjust the direction of the light beam by tilting the fixture on its hanging bracket. Loosen the side knobs, position the light, and re-tighten the knobs.
- Continuous Operation: This fixture has no duty cycle, meaning it can operate continuously without requiring cool-down periods. However, ensure adequate ventilation to prevent overheating.
6. Maintenance
Regular maintenance can help prolong the life of your LED SPOT fixture.
- Cleaning: Disconnect the unit from power before cleaning. Use a soft, lint-free cloth to wipe down the exterior. For the lens, use a gentle glass cleaner applied to the cloth (not directly to the lens) to avoid streaks.
- Ventilation: Periodically check that the ventilation openings are clear of dust and debris. Use compressed air if necessary to clear blockages.
- Storage: When not in use, store the fixture in a cool, dry place, away from extreme temperatures and humidity.
- Service: There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
7. Troubleshooting
If you encounter issues with your LED SPOT, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. | No power supply. Faulty power cord. Outlet issue. | Ensure the power cord is securely plugged into both the fixture and a working electrical outlet. Test the outlet with another device. Try a different power cord if available. |
| Light output is dim or inconsistent. | Dust or debris on lens. Internal component issue. | Clean the lens carefully as described in the Maintenance section. If the problem persists, discontinue use and contact customer support. |
| Fixture feels excessively hot. | Blocked ventilation. Operating in high ambient temperature. | Ensure all ventilation openings are clear. Move the fixture to a cooler, well-ventilated area. Disconnect power and allow it to cool down. |
If these solutions do not resolve the issue, please contact Eliminator Lighting customer support for further assistance.
8. Specifications
| Attribute | Value |
|---|---|
| Model Number | LED SPOT |
| Light Source | 1 x 5 Watt White LED |
| Beam Angle | 5 Degrees |
| Power Consumption | 5 Watts |
| Input Voltage | 120V AC, 60Hz (Standard US) |
| Item Weight | 12.8 ounces (approx. 0.36 kg) |
| Product Dimensions (L x W x H) | 4 x 2 x 2 inches (approx. 10.16 x 5.08 x 5.08 cm) |
| Color | White (LED color) |
| First Available Date | October 10, 2012 |
9. Warranty and Support
Eliminator Lighting products are designed for reliability and performance. For specific warranty information regarding your LED SPOT fixture, please refer to the warranty card included with your purchase or visit the official Eliminator Lighting website.
For technical support, service inquiries, or to purchase replacement parts, please contact Eliminator Lighting customer service. Contact information can typically be found on the manufacturer's website or on your purchase documentation.
Website: www.eliminatorlighting.com (This is a placeholder link, actual link may vary)
