Nova 0337LLFGIT

Nova Rico 0337LLFGIT Illuminated Globe 37cm

Instruction Manual

Introduction

Thank you for choosing the Nova Rico 0337LLFGIT Illuminated Globe. This manual provides essential information for the safe and efficient use of your new globe. Please read these instructions carefully before setup and operation, and retain them for future reference.

Safety Information

  • Ensure the globe is placed on a stable, flat surface to prevent tipping.
  • Keep the globe away from direct sunlight, heat sources, and moisture to prevent damage to the materials and electrical components.
  • If the globe is illuminated, use only the power adapter supplied or a compatible replacement. Do not overload electrical outlets.
  • Do not attempt to open or repair the electrical components of the globe yourself. Refer to qualified service personnel.
  • Keep out of reach of small children to prevent accidental damage or injury.
  • Clean the globe with a soft, dry cloth. Avoid abrasive cleaners or solvents.

Package Contents

Please check the package contents carefully. If any items are missing or damaged, contact your retailer.

  • Nova Rico 37cm Globe Sphere
  • Wooden Base
  • Meridian Arc (connecting sphere to base)
  • Power Adapter (for illumination)
  • Instruction Manual (this document)

Setup

  1. Unpacking: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
  2. Base Assembly: Place the wooden base on a stable, flat surface.
  3. Globe Placement: Gently place the globe sphere onto the meridian arc, ensuring it sits securely and can rotate freely. The meridian arc should be firmly attached to the wooden base.
  4. Power Connection (for illumination): Locate the power input on the globe or its base. Connect the power adapter cable to this input. Plug the power adapter into a suitable electrical outlet.
Nova Rico 37cm Illuminated Globe on its wooden base

Image 1: The Nova Rico 37cm Illuminated Globe securely placed on its wooden base. This image shows the lower part of the globe and the sturdy wooden stand, illustrating how the globe is supported.

Operating Instructions

  • Rotation: The globe is designed to rotate smoothly on its axis. Gently spin the globe to view different regions of the world.
  • Illumination: If your globe is connected to power, locate the power switch (usually on the power cord or base). Flip the switch to turn the internal light on or off. The illumination enhances the geographical details and can serve as a decorative light source.
Close-up of Nova Rico 37cm Illuminated Globe showing Africa and Europe

Image 2: A detailed view of the Nova Rico 37cm Illuminated Globe, focusing on the continents of Africa and Europe. This image highlights the clear geographical markings and political boundaries visible on the globe's surface.

Maintenance

  • Cleaning: To clean the globe surface and base, use a soft, dry, lint-free cloth. For stubborn marks, slightly dampen the cloth with water, then immediately dry the surface. Do not use chemical cleaners, abrasives, or polishes, as these can damage the globe's finish or map details.
  • Bulb Replacement (if applicable): If the illumination stops working, the bulb may need replacement.
    1. Unplug the globe from the power outlet.
    2. Carefully separate the two hemispheres of the globe (if designed for bulb access) or access the bulb compartment from the base, following the specific instructions provided with your globe model (if different from this general guide).
    3. Replace the old bulb with a new one of the same type and wattage. Refer to the specifications section or the globe's label for bulb requirements.
    4. Reassemble the globe and reconnect power.
  • Storage: If storing the globe for an extended period, disconnect it from power and place it back in its original packaging to protect it from dust and damage.

Troubleshooting

ProblemPossible CauseSolution
Globe light does not turn on.
  • Power cord not plugged in.
  • Power switch is off.
  • Bulb is faulty or loose.
  • Power outlet is not working.
  • Ensure the power cord is securely plugged into the globe and the wall outlet.
  • Check that the power switch is in the "ON" position.
  • Refer to the "Bulb Replacement" section under Maintenance.
  • Test the outlet with another appliance.
Globe does not rotate smoothly.
  • Obstruction on the base or arc.
  • Globe not seated correctly.
  • Check for any debris or objects obstructing the rotation.
  • Ensure the globe sphere is properly seated within the meridian arc and on its axis.
Globe appears unstable.
  • Not on a flat surface.
  • Base or arc not assembled correctly.
  • Move the globe to a firm, level surface.
  • Recheck the assembly of the globe to its base and arc.

Specifications

  • Model: 0337LLFGIT
  • Manufacturer Reference: 8000623000878
  • Brand: Nova Rico
  • Globe Diameter: Approximately 37 cm
  • Illumination: Yes (Linea Lumino)
  • Power Source: AC Adapter (specific voltage/amperage not provided, refer to adapter label)
  • Package Dimensions: 66 x 51.8 x 43.2 cm
  • Item Weight (packaged): 4.88 kg
  • Assembly Required: Minimal (placement on base)
  • Batteries Required: No
  • ASIN: B009NTVA7G

Warranty and Support

For warranty information, technical support, or replacement parts, please contact your retailer or the manufacturer, Nova Rico. Keep your proof of purchase for warranty claims.

Manufacturer: NOVA RICO

© 2023 Nova Rico. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.