Panasonic KX-TSC62SXB Corded Telephone User Manual

1. Introduction

This manual provides essential instructions for the setup, operation, and maintenance of your Panasonic KX-TSC62SXB Corded Telephone. This model features caller ID, a speakerphone, and an alphanumeric display, designed for reliable communication.

Please read this manual thoroughly before using your new telephone to ensure proper functionality and to familiarize yourself with all features.

2. Package Contents

Before proceeding with the setup, please verify that all items are present in the package:

• 1N Telephone Set (Handset and Base Unit)
• 1N Line Cord
• 1N Operating Instructions (this manual)
• 1 Lithium Polymer Battery (included, for display functions)

3. Setup

Follow these steps to set up your Panasonic KX-TSC62SXB telephone:

1. Connect the Handset: Plug the coiled cord from the handset into the designated jack on the base unit.
2. Connect the Line Cord: Plug one end of the telephone line cord into the LINE jack on the base unit and the other end into your wall telephone jack.
3. Battery Installation (for display functions): The telephone includes a Lithium Polymer battery. Install it in the designated battery compartment, typically located on the underside of the base unit, following the polarity indicators. This battery powers the display for features like Caller ID and time/date display.
4. Initial Power-Up: The telephone should power on automatically once connected to the phone line.
5. Set Date and Time: For Caller ID functionality and accurate call logs, it is crucial to set the correct date and time. Refer to the 'Operating Instructions' section for detailed steps on how to access and adjust these settings using the menu buttons.
6. Wall Mounting (Optional): The telephone is wall-mountable. Use the provided wall mounting adapter (if included) and follow the instructions to secure the unit to a wall. Ensure the long cord allows for comfortable use.

Figure 1: Product dimensions and weight for installation planning.

4. Operating Instructions

4.1 Making and Receiving Calls

• To Make a Call: Lift the handset or press the SP-PHONE button. Dial the desired number using the alphanumeric keypad.
• To Receive a Call: When the phone rings, lift the handset or press the SP-PHONE button.
• To End a Call: Place the handset back on the cradle or press the SP-PHONE button again if using speakerphone.

4.2 Speakerphone Function

To use the speakerphone, press the SP-PHONE button during a call. Press it again to switch back to the handset or to end the call.

4.3 Caller ID and Call Log

The telephone stores up to 30 incoming call records. When a call is received, the caller's number (and name, if available) will be displayed.

• Viewing Call Logs: Press the CALLER ID button (up/down arrows) to scroll through the stored call records.
• Redial from Call Log: Select a number from the call log and press the REDIAL button to dial it.
• Clearing Call Logs: Consult the detailed menu instructions in the full user guide for options to clear individual or all call log entries.

Figure 2: Alphanumeric display showing caller information.

Figure 3: Key features: 30 Call Logs (Caller ID) and 5 Redial Memory.

4.4 Redial Function

The telephone stores the last 5 dialed numbers. Press the REDIAL button to view and redial these numbers.

4.5 Mute Function

During a call, press the MUTE button to temporarily silence your microphone. The other party will not hear you. Press MUTE again to resume speaking.

4.6 Tone/Pulse Settings

The telephone supports switchable tone and pulse dialing settings. This setting is usually configured during initial setup or can be changed via the menu if required by your telephone line service. Refer to the full user guide for instructions on adjusting this setting.

5. Maintenance

• Cleaning: Wipe the telephone with a soft, dry cloth. Do not use liquid or aerosol cleaners.
• Placement: Avoid placing the telephone in direct sunlight, near heat sources, or in areas with high humidity.
• Cord Care: Ensure the telephone line cord and handset cord are not tangled or pinched, which can cause damage or signal issues.

6. Troubleshooting

If you experience issues with your telephone, try the following solutions:

• No Dial Tone:
  • Ensure the telephone line cord is securely connected to both the phone and the wall jack.
  • Test with another phone or line if available to determine if the issue is with the phone or the line.
• Caller ID Not Displaying:
  • Verify that the date and time are correctly set on the telephone.
  • Confirm that you have Caller ID service activated with your telephone service provider.
  • Ensure the battery for the display is correctly installed and functional.
• Display Blinking:
  • This often indicates that the date and time settings need to be configured. Follow the instructions in Section 3. Setup, step 5.
• Poor Sound Quality:
  • Check all cable connections.
  • Ensure the handset is clean and free from obstructions.
  • If using speakerphone, ensure you are within a reasonable distance from the microphone.

7. Specifications

8. Warranty Information

Your Panasonic KX-TSC62SXB Corded Telephone comes with a 1-year manufacturer warranty from the date of purchase. Please retain your purchase receipt as proof of purchase for warranty claims.

For warranty service or inquiries, please contact Panasonic customer support.

9. Support

For further assistance, technical support, or service, please contact Panasonic India Pvt. Ltd. at the following details:

• Address: 12th Floor, Ambience Tower, Ambience Island, NH-8, Gurgaon, Haryana-122002 India
• Telephone: +91-124-4751300
• Website: www.panasonic.com/in/ (Please check for the most current contact information)