Introduction
This instruction manual provides essential information for the safe and proper installation and maintenance of your Satco 90-2382 Cast Brass Canopy. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Important Safety Information: Installation should be performed by a qualified electrician or a competent person. Always disconnect power at the circuit breaker before installing, servicing, or cleaning this product. Failure to do so may result in electric shock, injury, or death. Ensure all electrical connections comply with local codes and ordinances.
Product Overview
The Satco 90-2382 is a cast brass canopy designed to cover electrical junction boxes for ceiling-mounted light fixtures. It features an antique brass finish and intricate decorative detailing, providing an aesthetic and functional cover for wiring connections.
An image showing the Satco 90-2382 canopy, featuring an antique brass finish with intricate decorative patterns. The canopy has a central opening for wiring and mounting.
Key Features:
- Constructed from durable cast brass.
- Features an antique brass finish.
- Designed for ceiling light fixture applications.
- Dimensions: Approximately 5-1/2 inches diameter, 1-1/16 inches center hole, 1-1/2 inches height.
Setup and Installation
This canopy is intended for wall mount applications, typically as a component for close-to-ceiling light fixtures. Proper installation ensures both safety and aesthetic integration.
- Safety First: Before starting, turn off the power to the electrical box at the main circuit breaker. Verify the power is off using a voltage tester.
- Prepare Wiring: Ensure the electrical wires from the junction box are properly stripped and ready for connection to the light fixture.
- Mounting Bracket (if applicable): If your light fixture requires a separate mounting bracket, install it onto the electrical box according to the light fixture's instructions. The canopy will typically attach to this bracket or directly to the electrical box.
- Position Canopy: Carefully feed the electrical wires through the center hole of the canopy. Position the canopy against the ceiling, aligning its mounting holes with the electrical box or mounting bracket.
- Secure Canopy: Use the provided screws (or screws from your light fixture) to securely fasten the canopy to the electrical box or mounting bracket. Ensure the canopy is flush against the ceiling and stable.
- Complete Light Fixture Installation: Proceed with the installation of your light fixture, connecting its wires to the house wiring as per the fixture's instructions. The canopy will conceal these connections.
- Restore Power: Once the light fixture is fully installed and secured, restore power at the circuit breaker.
Operation
The Satco 90-2382 Cast Brass Canopy is a passive component designed to provide a decorative and protective cover for electrical connections of a ceiling light fixture. It does not have active operational functions. Its primary role is to safely house wiring and enhance the aesthetic appeal of the installed lighting unit.
Maintenance
To maintain the appearance and integrity of your cast brass canopy, follow these simple guidelines:
- Cleaning: Dust the canopy regularly with a soft, dry cloth. For a more thorough cleaning, gently wipe with a damp cloth and mild soap, then dry immediately with a clean, soft cloth to prevent water spots. Avoid abrasive cleaners or harsh chemicals, as these can damage the antique brass finish.
- Inspection: Periodically inspect the canopy for any signs of loosening or damage. Ensure it remains securely fastened to the ceiling.
- Finish Care: The antique brass finish is designed to age gracefully. If desired, a brass-specific polish can be used sparingly to restore luster, following the polish manufacturer's instructions.
Troubleshooting
As a non-electrical component, the canopy itself typically does not require troubleshooting. If you experience issues with your light fixture after installing the canopy, consider the following:
- No Power to Light Fixture: Ensure the circuit breaker is on. Check all electrical connections within the junction box and light fixture for proper wiring and secure contact.
- Loose Canopy: If the canopy feels loose, ensure the mounting screws are tightened securely. Do not overtighten.
- Damaged Finish: Refer to the maintenance section for care instructions. Significant damage may require replacement.
If problems persist, consult a qualified electrician.
Specifications
| Specification | Detail |
|---|---|
| Brand | Satco |
| Model Name | 90-2382 |
| Part Number | 90-2382 |
| Material | Cast Brass |
| Finish | Antique Brass |
| Product Dimensions | 10 x 10 x 10 inches (Package Dimensions) |
| Item Weight | 8 ounces |
| Mounting Type | Wall Mount (for ceiling fixture component) |
| UPC | 045923923821 |
| GTIN | 00045923923821 |
Warranty Information
For detailed warranty information regarding the Satco 90-2382 Cast Brass Canopy, please contact the manufacturer directly. Warranty terms and conditions may vary.
Support
If you have any questions, require technical assistance, or need further support regarding your Satco 90-2382 Cast Brass Canopy, please visit the official Satco website or contact their customer service department. Ensure you have your model number (90-2382) available when seeking support.
