Introduction
The Unger WC250 Original Strip Washer is designed for efficient and effective cleaning of windows, screens, and for dusting. It features an innovative T-shaped handle with water wells and a plush, woven synthetic fabric sleeve. This manual provides instructions for its proper use and maintenance.
Product Overview

Figure 1: The Unger WC250 Original Strip Washer. This image displays the complete strip washer, featuring a white, plush cloth sleeve attached to a green, T-shaped handle. The sleeve is approximately 10 inches long, designed for broad cleaning coverage.
The Unger WC250 consists of two primary components: the green nylon T-shaped handle and the white cloth sleeve. The handle is designed for comfortable grip and features internal water wells. The sleeve is made from a plush, woven synthetic fabric, engineered for both gentle and strong cleaning tasks.
Setup
- Attach Sleeve: Slide the white cloth sleeve onto the T-shaped handle. Ensure the sleeve is fully seated and covers the entire washing surface of the handle. The sleeve is designed to fit snugly.
- Prepare Cleaning Solution: Fill a bucket with your preferred window cleaning solution or plain water.
- Optional Extension Pole: For high-reach cleaning, the handle can be attached to a compatible extension pole. Insert the pole into the opening at the end of the green handle. Ensure a secure connection to prevent twisting during use.
Operating Instructions
- Wet the Sleeve: Dip the assembled strip washer into the cleaning solution, ensuring the sleeve is thoroughly saturated. The handle's water wells will absorb and release water as needed.
- Apply to Surface: Gently apply the wet strip washer to the surface to be cleaned (e.g., window, screen). Use even pressure to distribute the cleaning solution.
- Clean the Surface: Move the strip washer across the surface in overlapping strokes to effectively clean and loosen dirt. The plush fabric is designed to tackle various cleaning tasks.
- Remove Excess Water: After washing, use a squeegee (sold separately) to remove the cleaning solution and dirt from the surface.
- Rinse as Needed: For heavily soiled surfaces, rinse the sleeve in clean water periodically during the cleaning process.
Maintenance
- Sleeve Cleaning: The white cloth sleeve is machine washable. Remove the sleeve from the handle and wash it with similar colors. Air dry or tumble dry on low heat. Avoid using bleach or harsh detergents that could damage the fabric.
- Handle Cleaning: Wipe the green handle with a damp cloth to remove any residue.
- Storage: Store the strip washer in a clean, dry place away from direct sunlight when not in use. Ensure the sleeve is completely dry before storing to prevent mildew.
Troubleshooting
- Ineffective Cleaning:
- Ensure the sleeve is thoroughly wet with cleaning solution.
- Check if the sleeve is dirty and requires washing.
- Verify that the cleaning solution is appropriate for the surface.
- Sleeve Slipping Off:
- Ensure the sleeve is correctly and fully seated on the T-shaped handle.
- Inspect the sleeve for wear or stretching that might affect its fit.
- Handle Twisting on Extension Pole:
- Ensure the extension pole is securely fastened to the handle. Some poles may require a tighter connection or a different attachment mechanism.
Specifications
| Model Number | WC250 |
| Product Dimensions | 9.4 x 12.6 x 2.8 inches |
| Item Weight | 4.94 ounces |
| Handle Material | Green Nylon |
| Sleeve Material | Plush, woven synthetic fabric (White) |
| Manufacturer | UNGER |
Warranty Information
For detailed warranty information regarding the Unger WC250 Original Strip Washer, please refer to the official UNGER website or contact UNGER customer service directly. Warranty terms and conditions may vary.
Support
Should you require further assistance or have questions not covered in this manual, please visit the official UNGER website or contact their customer support. You can find contact details on the UNGER website: www.ungerglobal.com.