1. Introduction
This manual provides comprehensive instructions for the ORICO 3.5 Inch Hard Drive Protective Case, model PHP-35. It covers the product's features, proper setup, operational guidelines, maintenance procedures, and troubleshooting tips to ensure optimal use and protection for your 3.5-inch hard drives.
2. Product Overview
The ORICO PHP-35 Hard Drive Protective Case is designed to safeguard your valuable 3.5-inch HDDs from various environmental factors and physical damage. Key features include:
- Ultimate Protection: Constructed with robust materials, the case offers dust-proof, moisture-proof, anti-static, stain-proof, and splash-proof functionalities.
- Double Protection: Equipped with 8 sponge cushions internally to absorb shocks and reduce pressure, providing enhanced protection against impacts.
- Convenient Book-Style Design: Features a book-style opening for easy access and an internal clip to securely hold the hard drive in place.
- Organizational Labels: Includes dedicated label stickers on the top and bottom for efficient hard drive library management and quick identification.
Figure 2.1: Multiple ORICO 3.5 inch hard drive protective cases.
3. What's in the Box
Upon opening your ORICO PHP-35 package, you should find the following items:
- 5 x ORICO 3.5 Inch HDD Protection Cases
- 1 x User Manual (this document)
- 1 x Service Card
4. Setup
Follow these steps to properly install your 3.5-inch hard drive into the protective case:
- Open the Case: Gently unlatch and open the ORICO protective case in its book-style manner.
- Insert Hard Drive: Carefully place your 3.5-inch HDD into the designated slot within the case. Ensure it sits flush and is secured by the internal clip.
- Close Securely: Close the case firmly until you hear a snap, indicating the latch is engaged.
- Apply Label (Optional): Use the provided label stickers on the front or side of the case to write down the contents or important details of the hard drive for easy identification.
Figure 4.1: Inserting a 3.5-inch hard drive into the case.
Figure 4.2: Writable label for HDD library management.
5. Operating Instructions
The ORICO PHP-35 cases are designed for simple and effective hard drive storage and organization.
- Storage: Once your hard drive is securely placed inside the case, it is ready for storage. The robust construction protects against dust, moisture, and minor impacts.
- Stacking: The cases are designed to be stackable, allowing for efficient use of space. Ensure they are stacked on a flat, stable surface to prevent accidental falls.
- Identification: Utilize the writable labels to categorize and quickly locate specific hard drives within your collection.
Figure 5.1: Stackable design for organized storage.
6. Maintenance
To ensure the longevity and effectiveness of your ORICO protective cases, follow these simple maintenance guidelines:
- Cleaning: Wipe the exterior of the case with a soft, dry, or slightly damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the material.
- Drying: If the case becomes damp, ensure it is completely dry before closing it or placing a hard drive inside to prevent moisture damage to the drive.
- Inspection: Periodically inspect the case for any signs of wear, cracks, or damage to the latch mechanism. Replace damaged cases to ensure continued protection.
7. Troubleshooting
If you encounter any issues with your ORICO PHP-35 Hard Drive Protective Case, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hard drive does not fit inside the case. | Incorrect hard drive size. | Ensure you are using a standard 3.5-inch HDD. This case is not designed for 2.5-inch drives or other form factors. |
| Case does not close securely. | Hard drive not seated correctly or debris in latch. | Remove the hard drive and re-insert it, ensuring it is fully seated. Check the latch mechanism for any obstructions and clear them. |
| Labels are not sticking properly. | Surface is dirty or oily. | Clean the surface of the case with a dry cloth before applying labels. |
8. Specifications
Detailed specifications for the ORICO 3.5 Inch Hard Drive Protective Case PHP-35:
- Brand: ORICO
- Model: PHP-35
- Compatible Devices: 3.5 Inch Hard Disk Drives (HDDs)
- Form Factor: Case
- Shell Type: Hard
- Color: Gray (PHP-GY)
- Item Weight (5-Pack): Approximately 1.32 pounds (0.6 kg)
- Package Dimensions: Approximately 7.52 x 7.24 x 4.88 inches (19.1 x 18.4 x 12.4 cm)
- Features: Anti-Static, Shockproof, Dustproof, Moisture-proof, Stain-proof, Splash-proof
Figure 8.1: Product dimensions of the ORICO PHP-35 case.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the Service Card included in your product package. You may also visit the official ORICO website or contact ORICO customer service directly for assistance with any product-related inquiries or issues.
ORICO Official Website: www.oricotech.com
