Faber F9 KIT 1 Active Carbon Filter Instruction Manual

1. Product Overview

The Faber F9 KIT 1 Active Carbon Filter (Model 112.0157.243) is an essential component for kitchen extractor hoods operating in filtering (recirculating) mode. This filter is designed to effectively neutralize cooking odors, ensuring a fresh and clean air environment in your kitchen. Proper and regular replacement of this filter is crucial for maintaining the optimal performance and efficiency of your extractor hood.

Key Features:

• Designed for odor absorption in recirculating hoods.
• Ensures optimal hood performance.
• Recommended replacement every 2-3 months.
• Supplied as a single unit.

This image displays the Faber F9 KIT 1 Active Carbon Filter, showing its rectangular shape and key dimensions. The filter measures approximately 26.7 cm in length, 23.7 cm in width, and 1.6 cm in thickness. These measurements are crucial for ensuring compatibility with your extractor hood.

2. Safety Information

Please read and understand all safety instructions before installing or replacing the active carbon filter.

• Power Disconnection: Always ensure the extractor hood is completely disconnected from the main power supply before performing any installation, maintenance, or cleaning. Failure to do so may result in electric shock.
• Handling: Wear appropriate protective gear, such as gloves, to prevent direct contact with carbon dust, which may cause minor skin irritation.
• Storage: Keep new filters in their original packaging in a dry place, away from direct sunlight and out of reach of children and pets.
• Disposal: Dispose of used filters according to local waste disposal regulations.

3. Installation (Setup)

Follow these steps to install or replace the Faber F9 KIT 1 Active Carbon Filter:

1. Disconnect Power: Turn off the extractor hood and unplug it from the electrical outlet or switch off the circuit breaker supplying power to the hood.
2. Access Filter Housing: Open the hood's filter housing. This typically involves releasing latches or screws that secure the metal grease filters or a dedicated compartment for the carbon filters. Refer to your specific hood's user manual for exact instructions on accessing the filter area.
3. Remove Old Filter: Carefully remove the old, saturated carbon filter. Note its orientation to ensure the new filter is installed correctly.
4. Insert New Filter: Place the new Faber F9 KIT 1 Active Carbon Filter (Model 112.0157.243) into the designated housing. Ensure it fits snugly and securely. Some filters may click into place or require specific alignment.
5. Close Housing: Close the filter housing and re-secure any latches or screws that were opened in step 2. Ensure all components are firmly in place.
6. Reconnect Power: Plug the extractor hood back into the electrical outlet or switch the circuit breaker back on.

Your hood is now ready for operation with the new active carbon filter.

4. Operating Instructions

Once the Faber F9 KIT 1 Active Carbon Filter is correctly installed, it operates automatically whenever the extractor hood is turned on in recirculating mode. The air drawn into the hood passes through the active carbon filter, which absorbs cooking odors before the filtered air is released back into the kitchen environment.

5. Maintenance

The active carbon filter is a consumable item and requires regular replacement. It is not washable and cannot be regenerated.

• Replacement Frequency: For optimal odor absorption and to maintain the efficiency of your extractor hood, it is recommended to replace the Faber F9 KIT 1 Active Carbon Filter every 2 to 3 months. This frequency may vary depending on the intensity and frequency of cooking.
• Performance Impact: Failure to replace the filter regularly will lead to reduced effectiveness in odor absorption and may negatively impact the overall performance of your extractor hood.
• Visual Inspection: While not always indicative of saturation, you may periodically inspect the filter for visible signs of heavy grease accumulation or discoloration.

6. Troubleshooting

If you encounter issues with your extractor hood's odor filtration, consider the following:

• Reduced Odor Absorption: If cooking odors persist or are not effectively removed, the active carbon filter is likely saturated and requires replacement. Ensure the filter is correctly installed and securely seated.
• Unusual Noise: If you hear unusual noises after filter replacement, ensure the filter is securely seated and not vibrating against other components within the hood. Re-check the installation steps.
• Airflow Issues: A heavily saturated carbon filter can restrict airflow. If you notice a significant decrease in the hood's suction power, replace the carbon filter.

7. Specifications

8. Warranty Information

This active carbon filter is a consumable item designed for regular replacement. For specific warranty details regarding manufacturing defects, please refer to the official FABER website or contact FABER customer support directly. Always retain your purchase receipt as proof of purchase.

9. Support

For further assistance, technical support, or to inquire about other FABER products, please visit the official FABER website or contact their customer service department.

FABER Official Store: Visit FABER Store on Amazon