Introduction
This manual provides essential information for the installation, operation, and maintenance of your Waste King H711-SN Hot Water Dispenser Faucet. This faucet is designed to deliver instant hot water when connected to a compatible hot water tank (sold separately). Featuring a gooseneck design and a satin nickel finish, it complements various kitchen aesthetics while offering practical functionality.
Image: The Waste King H711-SN Hot Water Dispenser Faucet in Satin Nickel.
Setup
The Waste King H711-SN faucet is designed for deck mount installation and requires connection to a dedicated hot water tank. Ensure all plumbing connections are secure and leak-free before powering on the hot water tank. The faucet features an open vent for added safety.
Installation Overview:
- Mounting: Secure the faucet to the countertop using the provided hardware.
- Water Connections: Connect the hot and cold water supply lines to the faucet and the hot water tank according to the tank's instructions.
- Tank Connection: Ensure the faucet is properly connected to the hot water tank's outlet.
- Fill Tank: Before turning on power, ensure the hot water tank is completely filled with water to prevent damage.
- Power On: Once all connections are verified and the tank is filled, plug in the hot water tank.
Note: Refer to the separate hot water tank instruction manual for detailed installation steps specific to your tank model. Professional installation is recommended.
Operating Instructions
To dispense hot water from your H711-SN faucet, simply push the lever back. The faucet is designed to deliver near-boiling water quickly when connected to a functioning hot water tank. Release the lever to stop the water flow.
Safety Precautions:
- Hot Water: The water dispensed is extremely hot. Exercise caution to prevent burns.
- Supervision: Do not allow children to operate the hot water dispenser unsupervised.
- Temperature Control: The temperature of the dispensed water is controlled by the hot water tank. Adjust the tank's thermostat as needed.
Maintenance
Regular maintenance ensures optimal performance and longevity of your Waste King H711-SN faucet.
Cleaning:
- Clean the satin nickel finish with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- For stubborn spots, use a mild soap solution and rinse thoroughly.
Inspection:
- Periodically check all connections under the sink for any signs of leaks. Tighten connections if necessary.
- Inspect the spout and lever for any mineral buildup that might affect water flow. Clean as needed.
Troubleshooting
If you encounter issues with your Waste King H711-SN faucet, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No hot water | Hot water tank not powered, temperature set too low, or tank malfunction. | Ensure the hot water tank is plugged in and receiving power. Check the tank's temperature setting and adjust if necessary. Consult the tank's manual for further troubleshooting. |
| Water leaking from faucet or connections | Loose connections, damaged O-rings or seals, or internal faucet issue. | Check and tighten all plumbing connections under the sink. If leaks persist, turn off the water supply and inspect O-rings and seals for damage. Contact customer support if the issue is internal to the faucet. |
| Low water flow | Mineral buildup in the spout or supply lines, or kinked supply hose. | Clean the aerator (if applicable) or spout for mineral buildup. Check supply hoses for kinks. |
Important: For issues not resolved by these steps, or if you suspect an internal component failure, contact Waste King customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Waste King |
| Model Number | H711-SN |
| Mounting Type | Deck Mount |
| Finish Type | Satin Nickel |
| Material | Metal |
| Color | Satin Nickel |
| Number of Handles | 1 |
| Special Feature | Open vent for added safety |
| Style | Contemporary |
| Installation Type | Plumbing |
| Spout Height | 10 Inches |
| Spout Reach | 4 Inches |
| Item Weight | 3.8 Pounds |
| Product Dimensions | 4.38 x 2.25 x 10 inches |
| UPC | 029122084101 |
Warranty
The Waste King H711-SN Hot Water Dispenser Faucet comes with a 1-Year Limited Warranty. This warranty covers defects in material and workmanship under normal use and service. Please retain your proof of purchase for warranty claims. For full warranty details and terms, refer to the documentation included with your product or visit the official Waste King website.
Support
For technical assistance, replacement parts, or warranty inquiries, please contact Waste King customer service. Have your model number (H711-SN) and date of purchase ready when contacting support.
Online Resources: Visit the official Waste King website for FAQs, additional product information, and support contact details.
Video Resources
No official product videos from the seller or manufacturer specific to the Waste King H711-SN Hot Water Dispenser Faucet were found that meet the embedding criteria. Please refer to the written instructions and diagrams for guidance.
