Griffin Reveal Case for iPhone 5 User Manual

Introduction

The Griffin Reveal Case is designed to protect your iPhone 5 while allowing its original design to remain visible. This sleek, one-piece case offers protection with minimal added bulk. It features a thin polycarbonate shell combined with slim rubber edges to cushion and securely grip your device.

This manual provides instructions for the proper installation, use, and maintenance of your Griffin Reveal Case.

Features

• One-piece polycarbonate shell with ultra-thin rubber edging.
• Super-slim design adds just 1.6 mm in thickness to your iPhone.
• Provides full access to touchscreen, camera, controls, and ports.

Setup

Installing the Case

1. Ensure your iPhone 5 is clean and free of dust or debris.
2. Align the iPhone 5 with the case, starting with the top edge (camera and power button side).
3. Gently press the iPhone into the case, ensuring all corners and edges are securely seated within the rubber frame.
4. Verify that all ports, buttons, and the camera are unobstructed and accessible.

Removing the Case

1. Hold the iPhone firmly.
2. Gently peel back one of the top corners of the rubber edge.
3. Carefully work your way around the edges until the iPhone can be safely removed from the case. Avoid excessive force to prevent damage to the case or phone.

Figure 1: Griffin Reveal Case installed on an iPhone 5. The clear back allows the phone's original design to be seen, while the white rubber edges provide protection and grip.

Operating

The Griffin Reveal Case is designed for everyday use, providing protection without hindering functionality. All ports, buttons, and the camera lens remain fully accessible when the case is installed correctly.

• Button Access: The case features precise cutouts or integrated button covers that allow full functionality of the power button, volume buttons, and mute switch.
• Port Access: Charging port and headphone jack are easily accessible through dedicated cutouts.
• Camera Functionality: The camera and flash are unobstructed, ensuring clear photos and videos.
• Wireless Charging: This case is compatible with wireless charging, allowing you to charge your device without removing the case.

Maintenance

To ensure the longevity and appearance of your Griffin Reveal Case, follow these simple maintenance guidelines:

• Cleaning: Wipe the case regularly with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners, as these may damage the polycarbonate or rubber materials.
• Storage: When not in use, store the case in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the case for any signs of wear or damage. While durable, prolonged use or significant impacts may affect its protective capabilities.

Troubleshooting

Common Issues and Solutions

Issue: Case appears dirty or discolored, especially the white rubber edges.

Solution: The white rubber material can show dirt or discoloration over time, particularly from contact with certain fabrics (e.g., denim). Clean the case regularly with a soft, damp cloth and mild soap. For persistent stains, a gentle cleaner specifically designed for rubber or plastic may be used, but test on an inconspicuous area first.

Issue: Difficulty installing or removing the case.

Solution: Ensure you are following the installation/removal steps outlined in the "Setup" section. The case is designed for a snug fit. Avoid forcing the phone into or out of the case, as this can cause damage. If the phone or case is warm, allow it to cool down as material expansion can make fitting tighter.

Issue: Buttons are not responsive or ports are blocked.

Solution: Verify that the iPhone is correctly seated within the case. Remove the case and re-install it, ensuring proper alignment. Check for any debris that might be obstructing the buttons or ports.

Specifications

Warranty and Support

For information regarding warranty coverage and customer support for your Griffin Reveal Case, please refer to the official Griffin Technology website or contact their customer service directly. Details on product registration, warranty claims, and technical assistance can typically be found on their support pages.

General return policies may vary based on the retailer from whom the product was purchased. Please consult your purchase receipt or the retailer's return policy for specific details.

For further assistance, you may visit the Griffin Store on Amazon.