1. Introduction
This manual provides essential instructions for the safe and effective use of your Axiom AC Power Cord. This power cord is designed as a replacement or spare charger for a wide range of Philips Norelco electric shavers and trimmers. Please read this manual thoroughly before first use and retain it for future reference.
2. Safety Information
Important Safety Precautions:
- Always ensure the power cord is securely connected to both the electrical outlet and the shaver before use.
- Unplug the cord when not in use, during cleaning, or before performing any maintenance to avoid the risk of electric shock.
- Do not use the power cord if it is damaged, frayed, or has exposed wires. Contact customer support for a replacement.
- Keep the power cord away from water or excessive moisture. This product is not waterproof.
- Do not attempt to disassemble or modify the power adapter.
- Keep out of reach of children.
3. Setup
3.1 Unpacking
Carefully remove the Axiom AC Power Cord from its packaging. Inspect the cord and adapter for any signs of damage.
3.2 Connecting the Power Cord
- Locate the charging port on your Philips Norelco electric shaver. This is typically found at the bottom of the shaver.
- Insert the small, two-pronged connector of the Axiom AC Power Cord firmly into the shaver's charging port.
- Plug the AC adapter end of the power cord into a standard electrical wall outlet (100-240V, 50-60Hz).
- Ensure the connection is secure. Your shaver should indicate that it is charging (e.g., via an indicator light).
This image shows the Axiom AC Power Cord with its adapter and the two-pronged connector. The connector is designed to fit into the charging port of compatible Philips Norelco electric shavers, as demonstrated in the image.
A detailed view of the two-pronged connector, highlighting its design for secure insertion into the shaver's charging port. This ensures proper electrical contact for efficient charging.
3.3 Visual Guide: Connecting the Charger
This video visually demonstrates the process of plugging the charger into a power strip and then connecting the two-pronged end into a Philips Norelco electric shaver, showing the charging indicator light activate.
This video provides a close-up of the 15V charger, highlighting its specifications and the two-pronged connector. It then shows the correct method for connecting the charger to a compatible Philips Norelco shaver.
4. Operating Instructions
The Axiom AC Power Cord is designed for straightforward operation. Once properly connected, it will automatically begin charging your compatible Philips Norelco electric shaver.
- Charging Indication: Most Philips Norelco shavers have an indicator light that illuminates or changes color to show charging status. Refer to your shaver's original manual for specific charging light behavior.
- Charging Time: Charging times vary depending on the shaver model and its battery level. Avoid overcharging by unplugging the shaver once it is fully charged, or if it has an automatic shut-off feature, once the indicator shows full charge.
- Power Output: The adapter provides an output of 15V 0.36A (5.4W) and accepts an input of 100-240V 50-60Hz, making it suitable for international travel with appropriate plug adapters (not included).
5. Maintenance
To ensure the longevity and safe operation of your Axiom AC Power Cord, follow these maintenance guidelines:
- Cleaning: Disconnect the power cord from both the outlet and the shaver before cleaning. Wipe the adapter and cord with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the power cord in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid wrapping the cord too tightly around the adapter to prevent damage.
- Inspection: Periodically inspect the cord for any signs of wear, cuts, or damage. If any damage is observed, discontinue use immediately and replace the cord.
6. Troubleshooting
If you encounter issues with your Axiom AC Power Cord, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Shaver not charging | Loose connection; Power outlet issue; Damaged cord/adapter; Incompatible shaver model. | Ensure all connections are firm. Try a different power outlet. Inspect the cord for damage. Verify shaver model compatibility. |
| Charging indicator light not on | Same as above; Shaver fully charged. | Check connections and power outlet. If shaver is fully charged, the light may turn off or change color. |
| Adapter feels hot | Normal operation; Overload/Short circuit. | A slight warmth is normal. If it's excessively hot, unplug immediately and check for damage or short circuits. Discontinue use if overheating persists. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | AC Power Cord |
| Input | 100-240V, 50-60Hz, 0.3A |
| Output | 15V, 0.36A, 5.4W |
| Protection Features | Over-current, Over-voltage, Overload, Short-circuit protection |
| Product Dimensions | 5.12 x 6.38 x 9.84 inches |
| Item Weight | 2.08 ounces |
| Manufacturer | AXIOM |
| Item Model Number | S9031/82 |
8. Compatible Models
This Axiom AC Power Cord is compatible with a wide range of Philips Norelco electric shavers, razors, and trimmers. Please verify your device's voltage requirements (15V) and connector type before use. Compatible series and models include, but are not limited to:
- Philips Norelco HQ8505 Series: 2100, 3000, 3200, 3500, 4100, 4200, 4500, 5000, 5100, 5150, 5500, 5700, 6100, 7100, 7200, 7300, 7400, 7700, 8800, 9300, 9700 Series Electric Shavers.
- Specific Philips Norelco Models: 8500X, 8138XL, 8140XL, 8150XL, 7310XL, 7340XL, 7110X, 7380XL, 7140XL, 7345XL, 7180XL, 7325XL, 7315XL, 7115X, 7145XL, 7240XL, 7350XL, HQ7320, HQ7340, HQ7360, HQ7380, HQ7290, HQ7200, 7120X, 7160XL, 7260XL, 7950XL.
- Most Norelco Aquatec, Arcitec, Multigroom Shavers, Razors and Trimmers.
- Spectra and Sensotec Models: 8894XL, 8825XL, 8831XL, 8865XL, 8890XL, 8892XL, 8895XL, HQ8894, HQ8445, 8845XL, 8846XL, 8867XL, 8880XL, 8881XL, 8890XL, HQ8885, HQ8875, HQ8865, HQ8845, HQ8825.
9. Warranty and Support
For warranty information, product support, or to inquire about replacement parts, please refer to the documentation included with your purchase or contact Axiom customer service directly. Contact details are typically available on the product packaging or the manufacturer's official website.