Introduction
This manual provides essential instructions for the proper use, care, and maintenance of your Breitling Bentley Flying B Automatic Watch, model A2836212/H522/982A. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.
Figure 1: Front view of the Breitling Bentley Flying B Automatic Watch. This image displays the silver dial with skeletal hands, the date display at the 12 o'clock position, and the 'Breitling for Bentley' inscription. The watch features a silver-tone stainless steel case and band, with a small seconds sub-dial at the 6 o'clock position.
Product Overview
The Breitling Bentley Flying B is a sophisticated automatic timepiece featuring a distinctive rectangular stainless steel case and a silver dial. Key features include:
- Movement: Automatic
- Case Material: Silver-tone Stainless Steel
- Band Material: Silver-tone Stainless Steel (Speed)
- Crystal: Scratch Resistant Sapphire
- Water Resistance: 100 meters (330 feet)
- Clasp Type: Deployment Clasp
- Crown: Screw Locked
- Dial: Silver, enhanced by skeletal hands, with a date display and a small seconds sub-dial.
Setup and Initial Operation
Unpacking and Inspection
Upon receiving your watch, carefully remove it from its packaging. Inspect the watch for any visible damage. Ensure all protective films are removed from the crystal, case, and band.
Winding the Watch
This watch features an automatic movement. While it winds itself with wrist movement, it is recommended to manually wind it upon initial setup or if it has stopped due to inactivity.
- Unscrew the crown (if applicable) by turning it counter-clockwise until it releases from the case.
- Gently turn the crown clockwise approximately 30-40 times. This will build up a power reserve.
- Push the crown back in and screw it down clockwise to ensure water resistance.
Setting the Time and Date
- Unscrew the crown (if applicable) and pull it out to the first position to set the date. Turn the crown to adjust the date.
- Pull the crown out to the second position to set the time. Turn the crown to move the hands clockwise until the correct time is displayed. Ensure to account for AM/PM when setting the date.
- Once the time and date are set, push the crown back in and screw it down clockwise firmly to maintain water resistance.
Operating the Watch
Automatic Movement
Your watch is powered by an automatic mechanical movement. It is wound by the natural motion of your wrist. When worn daily, it should maintain its power reserve. If the watch is not worn for an extended period, it may stop and require manual winding as described in the "Setup" section.
Water Resistance
The watch is water resistant to 100 meters (330 feet). This rating makes it suitable for swimming and snorkeling. However, it is not suitable for scuba diving. Always ensure the crown is fully screwed down before exposing the watch to water.
- Avoid operating the crown or pushers (if any) while the watch is wet or submerged.
- After exposure to saltwater, rinse the watch with fresh water and dry it thoroughly with a soft cloth.
Maintenance and Care
Cleaning
Regularly clean your watch with a soft, dry cloth. For the stainless steel case and band, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.
Storage
When not wearing your watch, store it in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, consider a watch winder to keep the automatic movement running.
Service
For optimal performance and to maintain its water resistance, it is recommended to have your Breitling watch serviced by an authorized service center every 3-5 years. This includes checking the movement, replacing gaskets, and pressure testing.
Troubleshooting
- Watch has stopped: If the watch has not been worn for a while, manually wind it by turning the crown clockwise 30-40 times. Ensure the crown is fully pushed in and screwed down.
- Date not changing correctly: Ensure the time is set correctly, passing 12 AM for the date to advance. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
- Condensation under crystal: This indicates a potential breach in water resistance. Immediately take the watch to an authorized service center to prevent further damage.
- Inaccurate timekeeping: Mechanical watches can vary slightly in accuracy. If the deviation is significant (e.g., more than +/- 15-20 seconds per day), the watch may require regulation by an authorized service center.
Specifications
| Feature | Detail |
|---|---|
| Model Number | A2836212/H522/982A |
| Movement | Automatic |
| Case Material | Stainless Steel |
| Case Size | 57.30 mm x 38.50 mm x 15 mm |
| Band Material | Stainless Steel (Speed) |
| Band Width | 24 mm |
| Crystal | Scratch Resistant Sapphire |
| Water Resistance | 100 meters / 330 feet |
| Clasp Type | Deployment Clasp |
| Crown | Screw Locked |
| Dial Color | Silver |
| Item Weight | 1.6 Pounds |
Warranty and Support
Breitling watches are covered by a manufacturer's warranty. Please refer to the official Breitling warranty card included with your purchase for specific terms and conditions, including warranty duration and coverage details. For service or support, please contact an authorized Breitling dealer or service center.
You can find more information and locate authorized service centers on the official Breitling website.
