NORDRIVE N30320

Download PDF
Contents

NORDRIVE N30320 Roof Rack Feet User Manual

Model: N30320

Introduction

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your NORDRIVE N30320 Kit 2 Roof Rack Feet. These feet are designed for vehicles with gutters and are adjustable from 43 cm to 58 cm in length. Please read this manual thoroughly before installation and keep it for future reference.

Safety Information

Always prioritize safety during installation and use. Failure to follow these instructions may result in property damage, personal injury, or death.

  • Ensure all components are present and undamaged before beginning installation.
  • Do not exceed the maximum weight capacity specified for your vehicle's roof or the roof rack system.
  • Securely fasten all bolts and nuts. Re-check tightness after the first few kilometers of driving and periodically thereafter.
  • Distribute load evenly on the roof rack.
  • Be aware of increased vehicle height and potential wind resistance when carrying loads.
  • Consult your vehicle's owner's manual for specific roof load recommendations.

Package Contents

Verify that all the following components are included in your package:

  • 2 x NORDRIVE N30320 Roof Rack Feet
  • Mounting hardware (bolts, nuts, washers)
  • Instruction manual (this document)
  • Note: Crossbars are sold separately and are not included with this kit.

Setup and Installation

Follow these steps carefully to install the NORDRIVE N30320 roof rack feet on your vehicle's gutters.

  1. Prepare the Vehicle: Ensure the vehicle's roof gutters are clean and free from debris.
  2. Assemble the Foot: Attach the adjustable vertical support to the main foot base using the provided bolts. Do not fully tighten yet.
  3. Adjust Height: Place the foot onto the vehicle's gutter. Adjust the height of the vertical support (43-58 cm) to ensure the top mounting surface is level and parallel to the ground, accommodating the roof's curvature. Secure the height adjustment bolts.
  4. Attach Crossbar Mount: Secure the crossbar mounting brackets to the top of the foot. These brackets will hold your crossbars (sold separately).
  5. Position Feet: Place both feet on the vehicle's gutters, ensuring they are symmetrically positioned and spaced according to the crossbar length and vehicle's roof dimensions.
  6. Secure to Gutter: Use the U-bolt type fasteners to firmly clamp the foot onto the vehicle's gutter. Tighten evenly on both sides to ensure a secure fit without damaging the gutter.
  7. Final Tightening: Double-check all bolts and nuts for tightness. Ensure the feet are stable and do not wobble.
NORDRIVE N30320 Roof Rack Foot showing adjustable height and mounting points.

Image: A single NORDRIVE N30320 roof rack foot, black in color, with an adjustable vertical arm and a horizontal bar attachment point. The image highlights the robust metal construction and the 'NORDRIVE' branding on the lower part of the foot.

Operating Instructions

Once the NORDRIVE N30320 feet are securely installed and crossbars are attached, you can begin using your roof rack system.

  • Load Distribution: Always distribute the load evenly across the crossbars. Avoid concentrating heavy items in one spot.
  • Secure Load: Use appropriate tie-downs, straps, or cargo nets to secure your load to the crossbars. Ensure there is no movement during transit.
  • Weight Limits: Never exceed the maximum weight capacity of your roof rack system or your vehicle's roof. Refer to your vehicle's owner's manual for specific limits.
  • Driving Considerations: Drive cautiously, especially with heavy or bulky loads. Be mindful of increased vehicle height, wind resistance, and braking distances.

Maintenance

Regular maintenance will ensure the longevity and safe operation of your roof rack feet.

  • Regular Inspection: Periodically inspect all components for signs of wear, damage, or corrosion. Check for loose bolts or nuts.
  • Cleaning: Clean the feet with mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
  • Lubrication: If any moving parts (e.g., height adjustment mechanism) become stiff, apply a small amount of silicone-based lubricant.
  • Storage: If removing the roof rack for extended periods, store the feet in a dry, protected area to prevent rust or damage.

Troubleshooting

ProblemPossible CauseSolution
Feet wobble or feel looseBolts not tightened sufficiently; incorrect height adjustment.Re-tighten all mounting bolts. Ensure height adjustment is secure.
Difficulty adjusting heightDirt or corrosion in the adjustment mechanism.Clean the mechanism and apply a silicone lubricant.
Paint peeling or threads damagedManufacturing defect or improper handling.Contact customer support for assistance. For paint in threads, carefully clean threads with a brush and acetone if necessary.

Specifications

FeatureDetail
BrandNORDRIVE
ModelN30320
ManufacturerLAMPA
Item Weight3.83 Kilograms
Package Dimensions49.6 x 30.4 x 5.4 cm
Adjustable Length43-58 cm
MaterialMetal
Mounting TypeU-bolt (for vehicle gutters)
Vehicle Service TypeCar
FoldableNo
International Article Code08034057303205

Warranty and Support

Specific warranty information for the NORDRIVE N30320 Kit 2 Roof Rack Feet is not provided in this manual. For details regarding warranty coverage, technical support, or replacement parts, please contact the manufacturer, LAMPA, or your point of purchase. Keep your proof of purchase for any warranty claims.

© 2025 NORDRIVE. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.