1. Product Overview
The Lampa 49718 Trunk Sill Protector is designed to safeguard your vehicle's rear bumper from scratches and damage during loading and unloading of the trunk. Many modern vehicles feature painted rear bumpers that are highly susceptible to such wear. This protector offers a durable and aesthetically pleasing solution.
Key features include:
- Effective Protection: Shields the rear bumper from scratches and impacts.
- Integrated Design: Once installed, it blends seamlessly with the vehicle's original styling, appearing as an original component.
- Durable Material: Constructed from black ABS plastic for longevity and resilience.
- Precision Fit: CNC trimmed to ensure a perfect adaptation to the original shape of the trunk sill.
- Easy Installation: Features simple and secure fastening with 3M double-sided adhesive, allowing for quick application in approximately 10 minutes.
Figure 1: The Lampa 49718 Trunk Sill Protector installed on a vehicle, showcasing its integrated appearance and protective function on the rear bumper.
2. Installation Instructions
Follow these steps for a simple and secure installation of your Lampa 49718 Trunk Sill Protector.
- Prepare the Surface: Thoroughly clean the surface of the rear bumper where the protector will be applied. Ensure it is free from dust, dirt, grease, and wax. Use an appropriate automotive cleaner and allow the surface to dry completely.
- Test Fit: Before removing the adhesive backing, carefully position the trunk sill protector on the bumper to ensure a perfect fit and alignment. Mark the desired position with masking tape if necessary.
- Apply Adhesive: Peel off the protective film from the 3M double-sided adhesive tape on the back of the protector. Avoid touching the adhesive surface with your fingers.
- Secure Placement: Carefully align the protector with the marked position on the bumper. Press firmly along the entire length of the protector to ensure strong adhesion. Apply pressure for at least 30 seconds to allow the adhesive to bond properly.
- Curing Time: For optimal adhesion, avoid washing the vehicle or exposing the protector to excessive moisture for at least 24-48 hours after installation.
Note: Installation is quick and typically takes around 10 minutes. Ensure the ambient temperature is suitable for adhesive application (usually above 15°C / 60°F) for best results.
3. Operation and Function
The Lampa 49718 Trunk Sill Protector functions passively by providing a protective barrier over the vulnerable painted surface of your vehicle's rear bumper. Its primary role is to absorb impacts and prevent scratches that can occur when loading or unloading items from the trunk. The durable ABS plastic material is designed to withstand daily wear and tear, maintaining the aesthetic integrity of your vehicle.
4. Maintenance and Care
To ensure the longevity and appearance of your Lampa 49718 Trunk Sill Protector, follow these simple maintenance guidelines:
- Regular Cleaning: Clean the protector regularly with mild car soap and water. Use a soft cloth or sponge to avoid scratching the surface.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or strong chemical detergents, as these can damage the ABS plastic material or the adhesive bond.
- Inspect Adhesion: Periodically check the edges of the protector to ensure the adhesive bond remains secure. If any lifting is observed, gently press down to re-secure.
- Temperature Extremes: While designed for automotive use, prolonged exposure to extreme temperatures (very hot or very cold) can affect material properties.
5. Troubleshooting
If you encounter any issues with your Lampa 49718 Trunk Sill Protector, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Protector is not adhering properly. |
|
|
| Protector appears misaligned. | Incorrect initial positioning. | Carefully test fit the protector before removing the adhesive backing. If already adhered, removal may damage the adhesive or paint. |
| Scratches on the protector itself. | Normal wear and tear from protecting the bumper. | The protector is designed to be sacrificial. Minor scratches are expected. For severe damage, consider replacement. |
6. Product Specifications
| Brand: | Lampa |
| Model Number: | 49718 |
| Material: | ABS Plastic |
| Color: | Black |
| Item Weight: | 800 g |
| Package Dimensions: | 109 x 26.5 x 20 cm |
| GTIN (EAN): | 08000692497180 |
| First Available Date: | January 31, 2013 |
7. Warranty Information
Specific warranty details for the Lampa 49718 Trunk Sill Protector are not provided in this manual. For information regarding product warranty, please refer to the packaging or contact Lampa customer support directly. Standard consumer rights and guarantees apply as per local regulations.
8. Customer Support
Should you require further assistance, have questions about installation, or need to report a product issue, please contact Lampa customer support. Contact information can typically be found on the product packaging or on the official Lampa website.
You can also visit the Lampa store on Amazon for more products and information: Lampa Amazon Store