Aerobed Classic Air Mattress, Queen

Introduction

This manual provides instructions for the proper setup, operation, maintenance, and troubleshooting of your Aerobed Classic Air Mattress, Queen size. The Aerobed Classic Air Mattress is designed to provide a comfortable sleeping surface, featuring an oval coil construction for even support. It is equipped with a handheld pump for inflation and a Whoosh valve for quick deflation and compact storage.

Safety Information

• Adult Supervision: Always supervise children around the air mattress. This product is not a toy.
• Sharp Objects: Keep the air mattress away from sharp objects, heat sources, and open flames to prevent punctures and damage.
• Weight Capacity: Do not exceed the maximum weight capacity of 600 pounds. Overloading can cause damage and injury.
• Inflation: Do not overinflate the mattress. Inflate until firm, but not rigid.
• Placement: Ensure the mattress is placed on a flat, clear surface free of debris.
• Not for Water Use: This air mattress is not intended for use in water.

Package Contents

Verify that all components are present:

• Aerobed Classic Air Mattress (Queen)
• Handheld Pump
• Carry Bag

Setup

1. Unpack and Unroll: Remove the air mattress from its carry bag and unroll it on a clean, flat surface where it will be used. Ensure there are no sharp objects underneath.
2. Locate Valve: Find the inflation valve on the side of the mattress.
3. Connect Pump: Insert the nozzle of the included handheld pump firmly into the inflation valve. Ensure a snug fit to prevent air leakage during inflation.
4. Inflate Mattress: Turn on the handheld pump. The mattress will begin to inflate automatically. Allow the mattress to inflate until it reaches your desired firmness. Do not overinflate.
5. Seal Valve: Once inflated, turn off the pump and quickly remove the nozzle. Close the inflation valve securely to prevent air from escaping.

Operating

Using the Mattress

• The Aerobed Classic Air Mattress is designed for two people and supports up to 600 pounds.
• Standard queen size sheets will fit this mattress (approximate inflated dimensions: 78 x 60 x 18 inches).

Deflation and Storage

1. Locate Whoosh Valve: Find the patented Whoosh valve on the mattress.
2. Open Valve: Open the Whoosh valve to allow air to rapidly escape from the mattress.
3. Roll and Compress: Once most of the air has escaped, begin rolling the mattress from the end opposite the valve to push out any remaining air.
4. Secure and Store: Close the Whoosh valve. Fold or roll the deflated mattress compactly and place it into the included carry bag for convenient storage.

Maintenance

Cleaning

• The mattress material (Plastic, Vinyl) is designed for easy cleaning.
• Hand Wash Only: Clean the surface of the mattress with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners.
• Ensure the mattress is completely dry before storing to prevent mildew.

Storage

• Store the deflated mattress in its carry bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Avoid placing heavy objects on top of the stored mattress to prevent damage.

Patching Minor Leaks

• If a small leak occurs, a vinyl repair kit (not included) can be used.
• Locate the leak by applying soapy water to the surface and looking for bubbles.
• Clean and dry the area thoroughly before applying the patch according to the repair kit instructions.

Troubleshooting

Mattress Losing Air

• Check Valve: Ensure the inflation valve and Whoosh valve are securely closed after inflation.
• Inspect for Leaks: Examine the mattress surface for punctures or tears. Small leaks can be identified by applying soapy water to the surface and looking for bubbles.
• Temperature Changes: Air mattresses can lose some firmness due to temperature drops. Add a small amount of air if needed.

Pump Not Working

• Power Source: Ensure the pump is properly connected to a working power outlet.
• Connections: Verify that the pump nozzle is securely inserted into the mattress valve.
• Obstructions: Check for any obstructions in the pump's air intake or output.

Specifications

Warranty

The Aerobed Classic Air Mattress comes with a 1-year limited pump warranty from the manufacturer, Coleman. Please retain your proof of purchase for warranty claims.

Customer Support

For further assistance, questions, or to report issues not covered in this manual, please contact Aerobed customer support. Refer to the product packaging or the manufacturer's official website for the most current contact information.