NuWave Precision Induction Cooktop (PIC) Model 30153 User Manual

1. Introduction

The NuWave Precision Induction Cooktop (PIC) is an advanced cooking appliance designed for precise temperature control and energy efficiency. It utilizes induction technology to heat cookware directly, offering a wide range of cooking temperatures from 100°F to 575°F (Sear). This manual provides detailed instructions for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your appliance.

The NuWave PIC features state-of-the-art programming technology with 100 hours of memory, allowing you to save and recall favorite cooking procedures. Its compact, circular design is both aesthetically pleasing and functional, maximizing cooking surface while minimizing countertop space. The included pan is specifically designed for induction cooking, ensuring compatibility and efficient heat transfer.

2. Important Safeguards

When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions before operating the NuWave PIC.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electrical shock, do not immerse cord, plugs, or the main unit in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• This appliance generates heat during use. Proper precautions must be taken to prevent the risk of burns, fires, or other damage to persons or property.
• Only use with induction-compatible cookware.

3. Product Components

The NuWave Precision Induction Cooktop package includes the following components:

• NuWave Precision Induction Cooktop (PIC) Unit
• Induction-Ready Pan
• User Manual (this document)

4. Setup and First Use

1. Unpacking: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
2. Placement: Place the NuWave PIC on a stable, flat, heat-resistant surface. Ensure there is adequate ventilation around the unit. Do not place on or near a hot gas or electric burner, or in a heated oven.
3. Power Connection: Plug the power cord into a standard 120V AC electrical outlet. The unit will emit a beep and the display will show "OFF".
4. Cookware Placement: Place an induction-compatible pan (like the one included) centered on the cooking surface. The unit will not operate without compatible cookware.
5. Initial Cleaning: Before first use, wipe the cooking surface and the pan with a damp cloth. Ensure all parts are dry before plugging in.

5. Operating Instructions

5.1 Basic Operation

1. Power On: With a compatible pan on the cooktop, press the START button. The default temperature setting will appear.
2. Adjust Temperature: Use the + and - buttons to adjust the temperature in 10°F increments, ranging from 100°F to 575°F (Sear). You can also select pre-programmed settings like Low, Med Low, Med, Med High, High, and Sear.
3. Set Time: Press the TIME button, then use the + and - buttons to set the desired cooking time (up to 100 hours).
4. Start Cooking: Once temperature and time are set, the unit will begin heating.
5. Pause/Clear: Press PAUSE/CLEAR to temporarily stop cooking or to clear the current settings and turn off the unit.

5.2 Programmable Stage Cooking

The NuWave PIC allows for multi-stage cooking, enabling you to program different temperatures and times sequentially.

1. Enter Program Mode: Press the PROG button.
2. Set Stage 1: Set the desired temperature and time for the first stage using the +/- and TIME buttons.
3. Add Next Stage: Press PROG again to move to the next stage. Repeat step 2 for each additional stage. The unit can store up to 100 hours of program memory.
4. Start Program: Once all stages are programmed, press START to begin the cooking cycle.

5.3 Delay Function

The Delay function allows you to set a start time for your cooking program.

1. Set Cooking Program: First, program your desired cooking stages (temperature and time) as described in Section 5.2.
2. Activate Delay: After programming, press the DELAY button (if available on your model, otherwise use the TIME button to set a future start).
3. Set Delay Time: Use the + and - buttons to set the delay time before cooking begins.
4. Confirm: Press START to activate the delay timer. The unit will begin cooking after the set delay period.

6. Maintenance and Cleaning

Proper care and maintenance will ensure the longevity and optimal performance of your NuWave PIC.

• Always unplug the unit from the power outlet and allow it to cool completely before cleaning.
• Cooktop Surface: Wipe the glass cooktop surface with a damp cloth and mild detergent. For stubborn stains, a non-abrasive cleaner designed for glass cooktops can be used. Do not use abrasive pads or harsh chemicals.
• Control Panel: Wipe the control panel with a soft, damp cloth. Do not allow water to seep into the control panel area.
• Pan: The included pan is typically non-stick and can be washed with warm soapy water. Refer to the pan's specific care instructions if available.
• Base Unit: Do not immerse the main unit in water or any other liquid. Wipe the exterior with a damp cloth.
• Storage: Store the NuWave PIC in a cool, dry place when not in use. Ensure the unit is clean and dry before storing.

7. Troubleshooting

If you encounter issues with your NuWave PIC, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

9. Warranty and Customer Support

NuWave products are designed for durability and performance. For specific warranty information regarding your NuWave Precision Induction Cooktop Model 30153, please refer to the warranty card included with your purchase or visit the official NuWave website.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact NuWave Customer Support:

• Online Support: Visit the NuWave Store on Amazon or the official NuWave website.
• Phone Support: Refer to your product registration or the NuWave website for the most current contact numbers.

Please have your model number (30153) and purchase date available when contacting support.