CorLiving Bromley Extra Wide TV Stand (Model B-003-RBT) Instruction Manual

1. Introduction

Thank you for choosing the CorLiving Bromley Extra Wide TV Stand, Model B-003-RBT. This manual provides essential information for the safe assembly, operation, and maintenance of your new TV stand. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

This TV stand is designed to accommodate most flat-screen televisions ranging from 48 inches to 95 inches. It features a two-tier design with ample storage space, steel supports, and four tinted tempered glass doors.

2. Safety Information

• Read all instructions: Ensure you understand all assembly steps and safety warnings before proceeding.
• Two-person assembly recommended: Due to the size and weight of the components, assembly by two adults is strongly recommended to prevent injury and damage to the product.
• Weight limits: Do not exceed the maximum weight capacity of the stand. Refer to the 'Specifications' section for details.
• Stable surface: Place the TV stand on a flat, level, and stable surface.
• Component placement: Distribute weight evenly across shelves. Avoid placing heavy items on the edges of shelves.
• Cable management: Use the integrated cable management system to prevent tripping hazards and ensure proper ventilation.
• Children safety: Do not allow children to climb on or play with the TV stand. Secure the unit to a wall if there is any risk of tipping.

3. Package Contents

Before assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.

• Top panel
• Bottom panel
• Side panels
• Middle shelf panels
• Steel support posts
• Tinted tempered glass doors (4)
• Hardware pack (screws, dowels, cam locks, door handles, etc.)
• Casters/Feet

4. Setup and Assembly

Assembly requires basic tools, typically a screwdriver and a hammer. An Allen key may be provided. It is recommended to have a second person assist with assembly.

1. Prepare the area: Clear a spacious, clean, and soft work surface to prevent scratching the furniture components.
2. Unpack and identify parts: Carefully unpack all components and hardware. Compare them against the parts list to ensure everything is present.
3. Assemble the base frame: Attach the side panels to the bottom panel using the provided hardware. Ensure all connections are secure.
4. Install internal shelves: Insert the middle shelf panels into the designated slots or attach them with hardware.
5. Attach steel support posts: Secure the steel support posts to the lower tier, ensuring they are firmly in place to support the top panel.
6. Place the top panel: Carefully position and secure the top panel onto the steel support posts and the assembled lower frame.
7. Install glass doors: Slide the tinted tempered glass doors into their tracks. Attach the door handles as instructed.
8. Attach feet/casters: Secure the feet or casters to the bottom of the stand. The casters allow for easier movement of the unit.

Image 1: Front view of the assembled CorLiving Bromley Extra Wide TV Stand. This image shows the overall design with the top shelf, open middle section, and four glass doors on the lower section.

Image 2: Angled view of the CorLiving Bromley TV Stand, showcasing the sliding glass doors and the two-tier structure. Some doors are open, revealing the internal compartments.

Image 3: Close-up detail of the sleek metal posts that support the upper shelf, highlighting the Ravenwood black finish of the engineered wood.

Image 4: Diagram illustrating the dimensions of the TV stand: 75.5 inches wide, 20 inches deep, and 22.4 inches high.

Image 5: Internal view of one of the compartments, showing the spacious area for media components and a circular cutout for cable management at the back.

5. Operating Instructions

• TV Placement: Carefully place your television on the top surface of the stand. Ensure the TV's base is fully supported and centered to prevent tipping. This stand is designed for TVs between 48 and 95 inches.
• Component Storage: Utilize the open shelf space for sound bars, gaming consoles, and other audio/video equipment. The lower compartments with glass doors are suitable for storing media, accessories, or additional components.
• Cable Management: Route all power and signal cables through the designated cutouts in the back panel to maintain a tidy appearance and prevent cable tangles.
• Ventilation: When placing electronic components inside enclosed compartments, ensure adequate airflow to prevent overheating. Consider leaving the rear panel cutouts unobstructed or, if necessary, leaving the glass doors slightly ajar during extended use of heat-generating devices.
• Mobility: If your stand is equipped with casters, it can be moved for cleaning or repositioning. Exercise caution when moving the stand, especially with a TV and components in place.

Image 6: The CorLiving Bromley TV Stand integrated into a living room, displaying a large television, speakers, and media devices on its shelves, demonstrating its functional use.

6. Maintenance

• Cleaning: Wipe surfaces with a soft, slightly damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
• Glass Care: Clean glass doors with a standard glass cleaner and a soft, lint-free cloth.
• Hardware Check: Periodically check all assembly hardware (screws, cam locks) to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
• Door Handles: If door handles become loose, they may require re-securing. Some handles use adhesive; applying a small amount of suitable adhesive or gently pinching the metal part to tighten the grip on the glass may be effective.

7. Troubleshooting

• Problem: Components overheating inside enclosed compartments.
  Solution: Ensure adequate ventilation. Leave the rear panel cutouts clear. Consider installing small cooling fans or leaving the glass doors partially open during use of heat-generating devices.
• Problem: Glass door handles slipping or detaching.
  Solution: The handles are often secured with a friction fit or adhesive. Try gently pinching the metal part of the handle to increase its grip on the glass. A small amount of strong, clear adhesive designed for glass and metal may also be used.
• Problem: Difficulty moving the assembled stand.
  Solution: If the stand has casters, ensure they are unlocked. If not, or if the stand is very heavy, enlist the help of a second person to lift and move the unit carefully to prevent damage or injury.
• Problem: Missing or damaged parts upon delivery.
  Solution: Do not proceed with assembly. Contact the manufacturer's customer service immediately with your product model number and a description of the issue.

8. Specifications

9. Warranty and Support

Warranty: This CorLiving product comes with a 1-year limited parts warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from improper assembly, misuse, abuse, accident, or normal wear and tear.

Customer Support: For warranty claims, missing parts, or technical assistance, please contact the manufacturer, Sonax. Have your model number (B-003-RBT) and proof of purchase ready when contacting support.

Manufacturer Contact Information:
Sonax
SURREY, BC, V3Z 3W7 CA
(Please refer to your purchase documentation or the manufacturer's website for the most current contact methods, such as phone numbers or email addresses.)