Introduction
This manual provides instructions for the safe and effective use of your Edushape See-Me Trendy 7-inch Sensory Ball. Designed to support early childhood development, this ball offers tactile stimulation and encourages motor skill development. Please read this manual thoroughly before use and retain it for future reference.
Product Contents: 1 Edushape See-Me Trendy 7-inch Sensory Ball.
Safety Information
- Always supervise children during play.
- Inspect the ball for damage before each use. Discontinue use if any damage is observed.
- Keep away from sharp objects and extreme temperatures.
- This product is intended for children aged 6 months and up.
- Made from BPA and phthalate-free plastic.
Setup
The Edushape See-Me Trendy Sensory Ball is typically shipped pre-inflated. No assembly is required. If the ball requires inflation or re-inflation:
- Locate the inflation valve on the ball.
- Insert a standard ball pump needle (not included) into the valve.
- Inflate the ball until it is firm but still slightly pliable. Do not over-inflate.
- Remove the pump needle and ensure the valve is sealed.

Operating Instructions
The Edushape Sensory Ball is designed for open-ended play to encourage various developmental skills.
- Tactile Exploration: Encourage your child to touch, hold, and feel the nubbly surface of the ball. This stimulates sensory development.
- Gross Motor Skills: Facilitate activities such as rolling, tossing, and bouncing the ball. This helps develop hand-eye coordination and strengthens muscles.
- Fine Motor Skills: For older infants, encourage gripping and manipulating the ball with their hands.
- Visual Tracking: Roll the ball slowly across a surface to encourage your child to follow its movement with their eyes.


Maintenance and Care
- Cleaning: Wipe the ball with a damp cloth and mild soap. Rinse thoroughly with water. Do not use harsh chemicals or abrasive cleaners.
- Drying: Air dry completely before storing.
- Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Ball is deflated or soft. | Loss of air through valve or minor puncture. | Re-inflate using a standard ball pump. If deflation persists, inspect for damage. |
| Ball appears dirty. | Accumulation of dirt from play. | Clean with mild soap and water as per maintenance instructions. |
Specifications
- Brand: Edushape
- Model: See-Me Trendy (Model Number: 705191)
- Material: Plastic (BPA and Phthalate-Free)
- Color: Transparent Trendy (Specific color may vary per individual product)
- Item Diameter: 7 inches
- Item Weight: Approximately 5.6 ounces (0.35 pounds)
- Recommended Age: 6 months and up
- UPC: 433599254767
Warranty Information
Edushape products are manufactured to high-quality standards. For specific warranty details, please refer to the packaging or contact Edushape customer support directly. General warranty terms typically cover manufacturing defects.
Support and Contact
For further assistance, questions, or to report any issues, please contact Edushape customer support:
- Website: Visit the official Edushape website for contact information and FAQs.
- Brand Store: Edushape Amazon Store