1. Important Safety Instructions
Read all instructions before using this heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always plug the heater directly into a 120V, 60Hz grounded wall outlet. Do not use with extension cords or power strips.
- Ensure the electrical circuit is adequately rated for the heater's power consumption (8 Amps at 900 Watts).
- Do not operate any heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains, at least 3 feet (0.9 meters) from the front of the heater and away from the sides and rear.
- Do not use the heater in bathrooms, laundry areas, or similar indoor locations where water may be present.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Always unplug the heater when not in use.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- This product is UL listed for indoor industrial and commercial comfort heat applications.
2. Product Overview
The FarmTek Infrared Utility Heater is designed to provide direct radiant heat to objects and surfaces, rather than heating the surrounding air. This makes it suitable for various applications where targeted heating is beneficial.
Figure 1: FarmTek Infrared Utility Heater. This image displays the black, rectangular heater unit with two hanging chains attached to the top. The heating elements and wire guard are visible on the underside.
Key Features:
- Compact Design: Features a compact housing with gold anodized reflectors.
- Heating Elements: Utilizes quartz tube heat elements for efficient radiant heat.
- Safety: Includes a wire guard for protection.
- Power Cord: Equipped with an 8-foot, 18/3 grounded cordset for 120V service.
- Control: Two independent On/Off toggle switches allow for operation at 450 Watts or 900 Watts.
- Finish: Brown enamel finish.
Typical Applications:
- Farrowing & Finishing areas
- Maternity & Calving facilities
- Milking Operations
- Fowl Brooding
- Dog Kennels
- Work Shops and Garages
- Sheds, Store Fronts, Truck Docks, Ticket Booths
3. Setup and Installation
This heater is designed for suspended installation. Ensure the mounting location is structurally sound and can support the weight of the heater.
Installation Steps:
- Unpack: Carefully remove the heater from its packaging. Inspect for any shipping damage.
- Mounting: Use the two included 4-foot jack chains to suspend the heater from a suitable overhead structure. Ensure the heater is level and securely fastened.
- Clearance: Maintain a minimum clearance of 3 feet (0.9 meters) from any combustible materials.
- Electrical Connection: Plug the 8-foot grounded cordset directly into a standard 120V, 60Hz grounded electrical outlet. Do not use adapters or extension cords.
4. Operating Instructions
The FarmTek Infrared Utility Heater features two independent toggle switches for flexible heat output.
Operating the Heater:
- Power On: Ensure the heater is properly installed and plugged into a grounded 120V outlet.
- Select Heat Level:
- To operate at 450 Watts: Flip one of the two On/Off toggle switches to the 'On' position.
- To operate at 900 Watts: Flip both On/Off toggle switches to the 'On' position.
- Observe Operation: The quartz heating elements will begin to glow and emit radiant heat.
- Power Off: To turn off the heater, flip all active toggle switches to the 'Off' position. For complete disconnection, unplug the heater from the wall outlet.
Note: The heater will be hot during operation and for a period after being turned off. Allow sufficient time for cooling before handling.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater. Always unplug the heater and allow it to cool completely before performing any maintenance.
Cleaning:
- Exterior: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Reflectors: Gently clean the gold anodized reflectors with a soft, dry cloth to maintain their efficiency. Avoid touching the quartz elements directly.
- Wire Guard: Ensure the wire guard is free from dust and debris.
Storage:
When not in use for extended periods, store the heater in a cool, dry place, protected from dust and moisture.
6. Troubleshooting
If your heater is not functioning as expected, consult the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power to the unit. | Check if the power cord is securely plugged into a live 120V outlet. Verify the outlet is functioning. Check the circuit breaker. |
| Only one heating element works (450W mode only). | Only one toggle switch is engaged. | Ensure both toggle switches are in the 'On' position for 900W operation. If one element consistently fails, it may require service. |
| Heater emits an unusual odor. | Dust accumulation on elements; new unit burn-off. | A slight odor is normal for new heaters during initial use. If persistent or strong, unplug the unit and clean it. Ensure proper ventilation. |
| Heater cycles on and off frequently. | Overheating protection activated. | Ensure adequate clearance around the heater. Unplug the unit, allow it to cool, and check for any obstructions. |
If troubleshooting steps do not resolve the issue, contact customer support for assistance.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | 105807 |
| Brand | FarmTek |
| Power Output | 450 / 900 Watts |
| BTUs | 3,072 |
| Amperage | 8 Amps |
| Voltage | 120V |
| Dimensions (L x W x H) | 16.5" x 5.8" x 4.8" (41.9 cm x 14.7 cm x 12.2 cm) |
| Item Weight | 8 pounds (3.6 kg) |
| Heating Coverage | Up to 42 sq. ft. at 6' height |
| Mounting Type | Suspended (chains included) |
| Burner Type | Radiant |
| Certifications | UL listed for indoor industrial and commercial comfort heat applications |
8. Warranty and Support
Specific warranty details for the FarmTek Infrared Utility Heater Model 105807 are typically provided at the point of purchase or within the product packaging. Please refer to your purchase documentation for precise warranty terms and conditions.
For technical support, replacement parts, or warranty claims, please contact FarmTek customer service through their official website or the contact information provided with your product.
