Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Kuryakyn 3240 LED Passenger Armrest Trim with Turn Signal Accents. This product is designed to enhance the visibility and aesthetics of your Honda Gold Wing GL1800 motorcycle by providing both running lights and turn signal functions.
The Kuryakyn 3240 is a waterproof lighting accessory intended for rear auto part position, specifically for 2006-2017 Honda Gold Wing GL1800 models (excluding F6B). Please read all instructions carefully before beginning installation.
Package Contents
Verify that all components listed below are present in your package:
- 1x Left Passenger Armrest Accent
- 1x Right Passenger Armrest Accent
- 1x Run-Turn Harness for Armrest Accents
- 1x Double "Y" Adapter
- 6x 6" Black Nylon Cable Ties
- 1x Dielectric Grease Pack
- 1x Alcohol Pad
Note: Some 2006-2010 models may require Kuryakyn P/N 3241 for plug-and-play installation. Some 2012-2016 models may require Kuryakyn P/N 3230 for plug-and-play installation. These adapters are sold separately.
Tools and Materials Required (Not Included)
- Set of metric hex wrenches
- Basic hand tools for motorcycle disassembly/assembly
- Electrical tape or heat shrink tubing (optional, for securing connections)
Installation Instructions
Important Safety Note: Before beginning any electrical work on your motorcycle, disconnect the battery to prevent accidental short circuits or damage to the electrical system. Consult your motorcycle's service manual for specific battery disconnection procedures.
- Prepare the Motorcycle: Ensure the motorcycle is stable on a level surface. Remove any necessary body panels or components to access the passenger armrest area and the rear wiring harness. Refer to your motorcycle's service manual for proper removal procedures.
- Locate Wiring Connection Point: Identify the appropriate wiring harness connection point for the rear accessory lighting. For some models, a plug-and-play rear accessory wiring adapter (P/N 3241 or 3230) may be required.
- Install Armrest Accents: Carefully position the Left and Right Passenger Armrest Accents onto the motorcycle's passenger armrests. Ensure they fit securely.
Image 1: Kuryakyn 3240 LED Passenger Armrest Trim installed on a red Honda Gold Wing GL1800, showing the chrome trim with integrated red LED lights on the passenger armrest.
- Connect Wiring Harness: Connect the Run-Turn Harness to the armrest accents and then to the motorcycle's wiring system using the Double "Y" Adapter. Apply dielectric grease to all electrical connections to prevent corrosion. Use the provided alcohol pad to clean surfaces before applying grease.
Image 2: Rear view of a red Honda Gold Wing GL1800 with Kuryakyn 3240 LED Passenger Armrest Trim and other Kuryakyn lighting accessories, highlighting the integrated LED turn signals and running lights.
- Secure Wiring: Use the black nylon cable ties to neatly secure all wiring, ensuring it is clear of moving parts, exhaust, and any pinch points.
- Test Functionality: Reconnect the motorcycle battery. Turn on the ignition and test the running light and turn signal functions of the newly installed armrest trim. Ensure all lights operate correctly.
- Reassemble Motorcycle: Once functionality is confirmed, reattach any body panels or components that were removed during installation.
Image 3: Close-up of the Kuryakyn 3240 LED Passenger Armrest Trim on a red Honda Gold Wing GL1800, showing the detailed chrome finish and the bright red LED light strip.
Operating Instructions
The Kuryakyn 3240 LED Passenger Armrest Trim is designed for seamless integration with your motorcycle's existing electrical system. Once properly installed, the LED lights will function as follows:
- Running Lights: When your motorcycle's ignition is on and headlights are activated, the LED lights on the armrest trim will illuminate as running lights, providing increased rear visibility.
- Turn Signals: When the turn signal is activated, the corresponding armrest trim LED lights will flash in conjunction with your motorcycle's existing turn signals, indicating your intended direction.
This product is waterproof, ensuring reliable performance in various weather conditions.
Maintenance
To ensure the longevity and optimal performance of your Kuryakyn 3240 LED Passenger Armrest Trim, follow these maintenance guidelines:
- Cleaning: Clean the LED lenses and chrome trim regularly with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the plastic or chrome finish.
- Inspection: Periodically inspect all wiring connections for tightness and signs of wear or corrosion. Reapply dielectric grease if necessary.
- Damage Check: Check the armrest trim for any physical damage, such as cracks or loose components, especially after long rides or if the motorcycle has been exposed to rough conditions.
Troubleshooting
If you experience issues with your Kuryakyn 3240 LED Passenger Armrest Trim, consider the following troubleshooting steps:
- Lights Not Illuminating:
- Check all electrical connections to ensure they are secure and properly seated.
- Verify that the motorcycle battery is fully charged and properly connected.
- Inspect the motorcycle's fuse box for any blown fuses related to accessory lighting.
- Ensure that any required plug-and-play adapters (P/N 3241 or 3230) are correctly installed and compatible with your motorcycle year.
- Turn Signals Not Flashing:
- Confirm that your motorcycle's main turn signals are functioning correctly.
- Check the wiring connections specific to the turn signal function of the armrest trim.
- Intermittent Operation:
- Loose connections are a common cause of intermittent operation. Re-check all connections and ensure they are tight.
- Inspect wiring for any signs of damage, fraying, or corrosion.
If problems persist after performing these checks, contact Kuryakyn customer support or a qualified motorcycle technician.
Specifications
| Feature | Detail |
|---|---|
| Brand | Kuryakyn |
| Model Number | 3240 |
| Compatible Vehicle | Honda Gold Wing GL1800 (2006-2017, excludes F6B) |
| Light Source Type | LED |
| Functions | Running Lights, Turn Signals |
| Color | Black (Lens), Chrome (Trim) |
| Special Feature | Waterproof |
| Auto Part Position | Rear |
| Voltage | 28 Volts |
| Material | Plastic (Lens) |
| Product Dimensions | 17 x 10 x 2.5 inches |
| Item Weight | 1.1 pounds |
| UPC | 191209016814, 748264492987, 643845867485, 651989706409 |
Warranty Information
Kuryakyn products are manufactured to high standards. For specific warranty terms and conditions, please refer to the official Kuryakyn website or contact their customer service department directly. Keep your proof of purchase for any warranty claims.
Customer Support
If you require further assistance with installation, operation, or troubleshooting, please visit the official Kuryakyn website or contact their customer support team. Always provide your product model number (3240) and details of your motorcycle (make, model, year) when seeking support.
Kuryakyn Official Website: www.kuryakyn.com
