1. Product Overview
The LiftMaster 8500 is a wall-mount garage door opener designed to optimize ceiling space in your garage. This model is part of the Elite Series and incorporates Security 2.0 and MyQ technology for enhanced control and monitoring.
Image: LiftMaster 8500 wall-mount garage door opener, designed to free up ceiling space.
Key features include:
- Space-saving wall-mount design.
- Equipped with Security 2.0 and MyQ technology.
- P3 motors for reliable and powerful performance.
- Ultra-quiet operation, minimizing sound and vibrations.
Important Compatibility Note:
- Not compatible with roll-up doors, low headroom track systems, or Wayne Dalton Torquemaster systems.
- Requires a front-mount torsion bar system for installation.
2. Setup and Installation
Installation of the LiftMaster 8500 requires careful attention to detail. It is recommended that installation be performed by individuals with appropriate technical knowledge or by a certified professional.
2.1 Components Included
- 3-Button Elite MAX Remote Control (Model 895MAX)
- MyQ Control Panel (Model 888LM)
- Remote Light (Model 380LM)
- Power Door Lock (Model 41A6102)
2.2 General Installation Considerations
- Ensure your garage door system has a front-mount torsion bar.
- Mount the opener securely to the wall beside the garage door, following the detailed instructions provided in the full installation guide.
- Connect all included accessories: the MyQ Control Panel, Remote Light, and Power Door Lock.
- Perform initial programming and safety reverse tests as outlined in the comprehensive manual.
3. Operating Instructions
The LiftMaster 8500 offers multiple ways to operate your garage door and its integrated features.
3.1 Using the 895MAX Remote Control
The 895MAX remote control allows for convenient operation of your garage door from your vehicle. Press the designated button to open or close the garage door. Refer to the remote control's specific instructions for programming additional devices or gates.
3.2 MyQ Control Panel (888LM)
The 888LM MyQ Control Panel provides advanced control and monitoring capabilities. It features Security 2.0 technology for enhanced security. Use the panel to open/close the door, turn lights on/off, and access MyQ features for smartphone control and alerts (requires compatible MyQ gateway, sold separately).
3.3 Remote Light (380LM)
The 380LM Remote Light provides illumination in your garage. It can be activated via the MyQ Control Panel or programmed to turn on when the garage door is operated. The motion sensor feature of the remote light provides additional convenience.
3.4 Power Door Lock (41A6102)
The 41A6102 Power Door Lock automatically engages when the garage door is closed, providing an additional layer of security by physically locking the door to the track.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your LiftMaster 8500 garage door opener.
- Monthly: Inspect the garage door springs, cables, rollers, and pulleys for signs of wear. Lubricate moving parts as recommended by the garage door manufacturer.
- Quarterly: Test the safety reversal system. Place an object (e.g., a 2x4 board) in the path of the door. The door should reverse upon contact. If it does not, adjust or contact a service professional.
- Annually: Check the balance of the garage door. With the opener disconnected, the door should stay in place when manually opened halfway. If it drifts, the springs may need adjustment by a professional.
- Light Bulbs: If the remote light (380LM) frequently burns out bulbs, ensure you are using the correct type and wattage specified in the full product manual. Vibration-resistant bulbs are often recommended for garage door openers.
5. Troubleshooting
This section addresses common issues you might encounter with your LiftMaster 8500 garage door opener.
5.1 Door Does Not Close Completely or Reverses
- Safety Sensors: Check the photo-eye safety sensors located near the bottom of the garage door tracks. Ensure they are aligned, clean, and free from obstructions. Direct sunlight can sometimes interfere with sensors; consider repositioning or shielding them if this is a recurring issue.
- Force Settings: The opener's force settings may need adjustment. Refer to the detailed installation manual for instructions on adjusting the open and close force limits.
5.2 Remote Control Not Working
- Battery: Replace the battery in the 895MAX remote control.
- Reprogramming: The remote may need to be reprogrammed to the opener. Follow the programming instructions in the remote control's manual.
5.3 Opener is Noisy
- While the 8500 is designed for quiet operation, excessive noise may indicate an issue. Check for loose hardware on the garage door or opener.
- Lubricate rollers and hinges on the garage door.
5.4 HomeLink Incompatibility
- Note that the LiftMaster 8500 may not be compatible with all vehicle HomeLink systems. Consult your vehicle's manual or the HomeLink website for compatibility information.
5.5 Tension Monitor Adjustment
- Adjusting the tension monitor can be complex, especially if it relates to the radius of your garage door rails. If you encounter difficulties, it is recommended to consult a professional garage door technician.
6. Specifications
| Attribute | Detail |
|---|---|
| Manufacturer | LiftMaster |
| Part Number | 8190391 |
| Item Weight | 30.5 pounds |
| Package Dimensions | 24.02 x 12.01 x 10 inches |
| Item Model Number | 8500 |
| ASIN | B008Y0XZ64 |
| Date First Available | August 21, 2012 |
7. Warranty and Support
For detailed warranty information, please refer to the documentation included with your LiftMaster 8500 garage door opener at the time of purchase, or visit the official LiftMaster website. Warranty terms and conditions may vary.
For technical support, replacement parts, or professional assistance, please contact LiftMaster customer service or an authorized LiftMaster dealer. Always provide your model number (8500) and any relevant part numbers when seeking support.
