Hurom H310A Slow Masticating Juicer Instruction Manual

1. Introduction

Thank you for choosing the Hurom H310A Slow Masticating Juicer. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new juicer. The H310A is designed for personal use, featuring a self-feeding hopper, quiet motor, and an easy-clean chamber for maximum juice yield.

Image: Front view of the Hurom H310A Slow Masticating Juicer in beige.

2. Important Safety Precautions

• Read all instructions before using the appliance.
• Ensure the juicer is properly assembled before operation.
• Keep hands and utensils out of the feeding chute during operation to prevent injury.
• Always unplug the juicer from the power outlet before assembling, disassembling, or cleaning.
• Do not operate the juicer with a damaged cord or plug. Contact customer service for repair.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Do not immerse the motor base in water or other liquids.
• Use only genuine Hurom replacement parts and accessories.
• The juicer is made of BPA-free materials for your safety.

3. Product Components

Familiarize yourself with the parts of your Hurom H310A juicer for proper assembly and operation.

Image: Diagram showing the labeled components of the Hurom H310A Slow Juicer, including the Self-Feeding Hopper, Easy Clean Chamber, Juice Spout, Pulp Outlet, Power Switch, and BPA-Free, Impact-Resistant ABS Plastic base.

• Self-Feeding Hopper: Designed to accommodate whole fruits and vegetables, reducing the need for pre-chopping.
• Easy Clean Chamber: The innovative design integrates the strainer, simplifying the cleaning process.
• Juice Spout: Where the extracted juice exits the machine.
• Pulp Outlet: Where the separated pulp is discharged.
• Power Switch: Controls the juicer's operation.
• Motor Base: Contains the quiet motor and is constructed from BPA-Free, impact-resistant ABS plastic.
• Auger: The slow-rotating screw that presses and extracts juice from produce.
• Ultem Strainer: Integrated within the chamber, designed for durability and efficient juice separation.

4. Setup and Assembly

The Hurom H310A is designed for quick and easy assembly.

1. Place the motor base on a stable, flat surface.
2. Align the Easy Clean Chamber with the motor base and gently press down until it locks into place.
3. Insert the auger into the chamber.
4. Place the self-feeding hopper onto the chamber, ensuring it is securely seated.
5. Ensure all parts are correctly assembled before plugging the unit into a power outlet.

100% BPA Free

Max Yield

Easy Clean

Quiet Motor

5. Operating Instructions

Follow these steps to operate your Hurom H310A juicer:

1. Prepare your produce: Wash fruits and vegetables thoroughly. The self-feeding hopper can handle whole produce, but larger items may benefit from being cut into smaller pieces to optimize juicing.
2. Place a juice collection container under the juice spout and a pulp collection container under the pulp outlet.
3. Plug the juicer into a grounded electrical outlet.
4. Turn the power switch to the 'ON' position. The juicer will begin operating at a slow speed of 43 revolutions per minute, utilizing Hurom's Slow Squeeze Technology to preserve nutrients.
5. Carefully place prepared fruits and vegetables into the self-feeding hopper. The juicer will automatically draw the produce in.
6. Allow the juicer to process the produce completely. Do not force large quantities of ingredients into the hopper at once.
7. Once juicing is complete, turn the power switch to the 'OFF' position and unplug the appliance.
8. Enjoy your fresh juice immediately for optimal taste and nutritional benefits.

Image: The Hurom H310A juicer with whole fruits like pomegranates and pears in its self-feeding hopper, demonstrating its ability to handle larger produce without extensive pre-chopping.

6. Cleaning and Maintenance

The H310A features a revolutionary no-strainer chamber design, making cleaning exceptionally simple.

1. Disassembly: Ensure the juicer is unplugged. Disassemble the hopper, chamber, and auger from the motor base.
2. Rinsing: Rinse all detachable parts under running water. The integrated strainer design means there's no separate mesh strainer to scrub, preventing clogged pulp.
3. Washing: For a more thorough clean, wash the parts with warm, soapy water and a soft brush if necessary.
4. Drying: Allow all parts to air dry completely before reassembling or storing.
5. Motor Base: Wipe the motor base with a damp cloth. Never immerse the motor base in water.

Image: Hands cleaning the disassembled auger and chamber parts of the juicer under running water, highlighting the ease of cleaning due to the strainer-free design.

7. Troubleshooting

8. Product Specifications

• Brand: Hurom
• Model: H310A
• Color: Beige
• Product Dimensions: 8"D x 14"W x 16"H
• Item Weight: 14 Pounds
• Material: BPA-free and impact-resistant ABS plastic body, Ultem strainer and auger
• Technology: Slow Squeeze Technology (43 RPM)
• Features: Self-Feeding Hopper V2, No-Strainer Chamber, Quiet Motor
• UPC: 888253000974
• First Available: November 3, 2022

9. Warranty and Support

For warranty information, product support, or to purchase replacement parts, please visit the official Hurom website or contact Hurom customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Hurom Official Website: www.hurom.com