Introduction
The Solo Stove Lite & Pot 900 Set is a portable, wood-burning camp stove system designed for efficient outdoor cooking. This set includes the Solo Stove Lite, a compact and lightweight stove, and the companion Pot 900, which nests perfectly with the stove for convenient transport. Engineered with a unique double-wall design, it promotes ultra-clean gasification and secondary combustion, resulting in a highly efficient burn with minimal smoke. Ideal for 1-2 people, this system utilizes natural biomass fuels such as twigs, leaves, pinecones, and wood, eliminating the need for canister fuels.
Setup
Setting up your Solo Stove Lite & Pot 900 Set is straightforward due to its integrated design. The stove and pot are designed to nest together for compact storage and transport.
- Unpack Components: Remove the Solo Stove Lite and Pot 900 from their nylon stuff sacks. The Pot 900 is designed to house the Solo Stove Lite when packed.
- Assemble the Stove: The Solo Stove Lite consists of a main burn chamber and a cooking ring. Place the main burn chamber on a stable, non-flammable surface.
- Position the Cooking Ring: Place the cooking ring on top of the main burn chamber. This ring directs the flame and supports your cookware.
- Prepare Fuel: Gather small, dry biomass fuel such as twigs, leaves, or pinecones. Ensure the fuel is dry for optimal burning efficiency and minimal smoke.
Figure 1: The Solo Stove Lite and Pot 900 are designed to nest together for compact storage, as shown here with the pot placed over the stove.
Operating Instructions
The Solo Stove Lite utilizes a highly efficient wood gasification process for cooking.
- Load Fuel: Place a small amount of dry kindling (e.g., small twigs, cotton balls, paper) into the burn chamber of the stove.
- Ignite Fuel: Ignite the kindling. Once a small flame is established, gradually add larger pieces of dry wood or biomass.
- Observe Secondary Burn: As the stove heats up, the unique double-wall construction will preheat air and feed it through vent holes near the top of the burn chamber. This creates a secondary combustion, burning off smoke and producing a hotter, more efficient flame. You will observe flames emerging from these upper holes.
- Place Pot: Once the stove is burning strongly and the secondary burn is active, carefully place the Pot 900 (or other compatible cookware) onto the cooking ring.
- Maintain Fire: Continuously feed small pieces of fuel into the stove through the opening as needed to maintain the desired heat. The stove is designed to burn fuel completely, leaving minimal ash.
- Boil Time: The Solo Stove Lite is capable of boiling 34 fluid ounces (approximately 1 liter) of water in 8-10 minutes, depending on fuel quality and environmental conditions.
Figure 2: The Solo Stove Lite in operation with the Pot 900, demonstrating the efficient flame produced by its design.
Figure 3: A user adding small pieces of wood fuel to the Solo Stove Lite during operation.
Figure 4: An illustration detailing the unique airflow system of the Solo Stove Lite, showing cold air intake, ash pan, nichrome wire gate, secondary burn, and cooking ring.
Maintenance
Proper maintenance ensures the longevity and continued performance of your Solo Stove Lite & Pot 900 Set.
- Ash Removal: After the stove has completely cooled, invert the stove to empty any remaining ash. The efficient burn typically leaves very little residue.
- Soot Cleaning: The Pot 900 and the exterior of the stove may accumulate soot during use. This is normal for wood-burning stoves. To clean, use a damp cloth or sponge with mild soap. For stubborn soot, a non-abrasive scrubber can be used. Some users find that rubbing a thin layer of soapy water on the outside of the pot before cooking can help reduce soot buildup and make cleaning easier.
- Storage: Ensure all components are completely dry before storing them in their respective nylon stuff sacks. Store in a dry place to prevent corrosion.
Troubleshooting
Here are solutions to common issues you might encounter with your Solo Stove Lite & Pot 900 Set:
| Problem | Possible Cause | Solution |
|---|---|---|
| Difficulty igniting or maintaining fire. | Wet fuel, insufficient kindling, poor airflow. | Use only dry fuel. Start with very small, easily combustible kindling. Ensure the stove is on a level surface and not obstructed, allowing for proper airflow through the bottom vents. |
| Excessive smoke. | Wet fuel, insufficient heat for secondary combustion. | Ensure fuel is completely dry. Allow the stove to reach optimal temperature for the secondary burn to activate fully. Feed smaller pieces of fuel more frequently rather than large, damp pieces. |
| Slow boil time or low heat output. | Insufficient fuel, wet fuel, strong wind, pot not properly seated. | Add more dry fuel. Position the stove in a sheltered area or use a windbreak (not directly against the stove to avoid overheating). Ensure the pot is centered on the cooking ring. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Solo Stove |
| Model Name | Solo Stove & Pot 900 |
| Model Number | SS1-P1 |
| Fuel Type | Wood (Biomass) |
| Material | 304 Stainless Steel |
| Stove Dimensions (Packed) | 4.25" Diameter, 3.8" Height |
| Stove Dimensions (Assembled) | 4.25" Diameter, 5.7" Height |
| Stove Weight | 9 oz (0.56 lbs) |
| Pot 900 Dimensions | 4.7" Diameter, 4.5" Height |
| Pot 900 Weight | 7.8 oz (0.49 lbs) |
| Pot 900 Max Volume | 30 fl oz (0.88 L) |
| Boil Time (34 fl oz water) | 8-10 minutes |
| UPC | 661799192781, 853977008438 |
Warranty & Support
The Solo Stove Lite & Pot 900 Set comes with a limited warranty. For detailed information regarding warranty coverage, claims, or product support, please visit the official Solo Stove website or contact their customer service directly.
You can also visit the Solo Stove Store on Amazon for additional product information and resources.
