MOOER Pitch Box

MOOER Pitch Box Micro Pedal Instruction Manual

Model: Pitch Box

Introduction

The MOOER Pitch Box is a compact guitar effects pedal designed to alter the pitch of your instrument's signal. It offers three distinct modes: Harmony, Pitch Shift, and Detune, allowing for a wide range of tonal modifications. Its durable full metal casing ensures reliability for various performance and practice environments. The pedal features true bypass circuitry to maintain signal integrity when disengaged.

Package Contents

  • MOOER Pitch Box Micro Pedal
  • Instruction Manual

Setup

Follow these steps to properly set up your MOOER Pitch Box pedal:

  1. Power Connection: Connect a 9V DC power adapter (center minus plug) to the 'DC IN' jack located at the top of the pedal. Ensure the power supply meets the specified requirements (9V DC, 128 mA current draw).
  2. Input Connection: Connect your guitar or the output of a preceding effects pedal to the 'INPUT' 1/4" monaural jack on the right side of the pedal.
  3. Output Connection: Connect the 'OUTPUT' 1/4" monaural jack on the left side of the pedal to your amplifier or the input of the next effects pedal in your signal chain.
MOOER Pitch Box micro pedal with cables connected
Figure 1: MOOER Pitch Box connected in a signal chain. This image shows the compact blue pedal with input and output cables, and a power cable connected to the DC IN port.
Top view of MOOER Pitch Box showing DC IN jack
Figure 2: Close-up of the top of the pedal, highlighting the DC IN jack for power connection.
Side view of MOOER Pitch Box showing OUTPUT jack
Figure 3: Close-up of the side of the pedal, highlighting the OUTPUT jack for connecting to an amplifier or next pedal.

Operating Modes and Controls

The MOOER Pitch Box features a mode switch and a large 'PITCH' dial to control its various effects.

Top-down view of MOOER Pitch Box showing mode switch and pitch dial
Figure 4: Top view of the MOOER Pitch Box, clearly showing the mode switch (Harmony, Pitch Shift, Detune) and the large 'PITCH' control dial.

Mode Switch:

  • Harmony: Generates a harmonized note alongside your original signal. The 'PITCH' dial selects the interval. This mode mixes both the wet (effected) and dry (original) signals.
  • Pitch Shift: Shifts your original signal up or down by a selected interval. The 'PITCH' dial determines the shift amount. In this mode, only the wet signal is output (100% wet).
  • Detune: Creates a subtle pitch variation, slightly detuning your signal to add thickness and fullness. The 'PITCH' dial controls the degree of detuning. This mode mixes both the wet and dry signals.

PITCH Dial:

This large rotary dial controls the pitch interval or detune amount. It ranges from -24 (two octaves down) to +24 (two octaves up), with intermediate settings for various semitone shifts. For Detune mode, it controls the subtle pitch variation in cents.

Footswitch:

The footswitch engages or disengages the effect. When engaged, the LED indicator will illuminate. The pedal features true bypass, ensuring your original tone remains unaffected when the pedal is off.

Official Demo Video (Harmony Mode)

Video 1: This official MOOER demo illustrates the Harmony mode of a MOOER pedal, showcasing how to adjust the left and right channel volumes, dry signal, and switch between different scales (major/minor) and preset slots. It provides examples of various harmony intervals.

Specifications

Feature Value
Input 1/4” monaural jack (impedance: 470k Ohms)
Output 1/4” monaural jack (impedance: 100 Ohms)
Power Requirements AC adapter 9V DC (center minus plug)
Current Draw 128 mA
Dimensions (D x W x H) 93.5mm x 42mm x 52mm (3.68 x 1.65 x 2.05 inches)
Weight 170g (0.37 lbs)
Body Material Metal
Color Blue Metal Flake
True Bypass Yes

Maintenance

  • Keep the pedal clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the pedal to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to open the pedal or perform unauthorized repairs, as this may void the warranty.
  • Ensure proper power supply is used to prevent damage.

Troubleshooting

  • No Sound: Check all cable connections (input, output, power). Ensure the power adapter is correctly connected and functioning. Verify that your guitar and amplifier are working correctly.
  • Weak or Distorted Sound: Ensure the power supply meets the pedal's specifications. Check for damaged cables. Adjust the 'PITCH' dial to ensure it's not set to an extreme or undesirable interval.
  • Effect Not Engaging: Press the footswitch firmly. If the LED does not light up, check the power connection.
  • Unwanted Noise: Ensure all connections are secure. Try using a different power supply or isolating the pedal from other noisy equipment.

Warranty and Support

MOOER products typically come with a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official MOOER website for detailed warranty information and support contacts. Keep your proof of purchase for warranty claims.

© 2023 MOOER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.