1. Product Overview
The Faller 180695 Mini Lighting Flicker Fire is a highly detailed plastic scale model accessory designed to simulate a flickering fire effect in dioramas or model railway layouts. This item is a scenery component and may require assembly. It is intended for experienced model builders and collectors.
This product is not a toy and is designed for static display or integration into larger model scenes, providing a realistic visual effect.
2. Safety Information
Please read and understand all safety instructions before handling or assembling this product.
- Age Recommendation: This product is designed for model builders and collectors aged 14 years and up. It is not suitable for children under 14 due to small parts and potential choking hazards.
- Small Parts: The kit contains small components that can be a choking hazard. Keep out of reach of young children and pets.
- Sharp Edges: Some plastic parts may have sharp edges or burrs. Handle with care during assembly.
- Adhesives/Paints: If using adhesives or paints (not included), ensure proper ventilation and follow the safety instructions provided by the adhesive/paint manufacturer.
- Electrical Components: The flicker unit contains delicate electronic components. Do not expose to water or excessive moisture. Handle with care to avoid damage from static electricity.
3. Package Contents
Carefully unpack the box and verify that all components are present:
- Plastic parts for assembly
- Flicker lighting unit with integrated wiring
- Instruction manual
Image 1: The main flicker lighting unit with its delicate wiring, as typically found in the package.
4. Assembly Instructions
This product requires assembly. Follow the detailed instructions provided in the included manual for specific steps. General assembly guidelines are as follows:
- Preparation: Ensure you have a clean, well-lit workspace. Gather necessary tools such as a hobby knife, small pliers, and plastic model adhesive (not included).
- Part Identification: Familiarize yourself with all plastic parts and the flicker lighting unit by referring to the parts diagram in the manual.
- Component Assembly: Carefully detach plastic parts from their sprues using a hobby knife or nippers. Clean any excess plastic (flash) from the parts.
- Integration of Flicker Unit: Integrate the flicker lighting unit into the designated area of your model or diorama. The fine wires are designed to be discreetly routed.
- Adhesion: Use plastic model adhesive sparingly to join parts as indicated in the manual. Allow sufficient drying time.
- Wiring Connection: Connect the flicker unit to a suitable power source (e.g., model railway power supply, battery pack) as per the voltage requirements specified in the manual. Ensure correct polarity.
Image 2: The compact size of the flicker unit, demonstrated by being held in a hand, indicating its suitability for small-scale models.
5. Operating Instructions
Once assembled and connected to a compatible power source, the Faller 180695 Mini Lighting Flicker Fire unit will automatically begin its flickering sequence. There are no user-adjustable settings for the flicker pattern or intensity.
- Power On: Apply power to the connected circuit. The integrated LED(s) will illuminate and begin to flicker, simulating a fire effect.
- Power Off: Disconnect power from the circuit to turn off the flicker effect.
Ensure the power supply voltage matches the requirements specified in the product's technical data to prevent damage to the unit.
6. Maintenance
The Faller 180695 Mini Lighting Flicker Fire unit requires minimal maintenance.
- Cleaning: If necessary, gently wipe the plastic parts and the flicker unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the plastic or electronic components.
- Storage: When not in use, store the product in a dry, dust-free environment, away from direct sunlight and extreme temperatures.
- Handling: Avoid bending or stressing the fine wires excessively, as this can lead to breakage.
7. Troubleshooting
If the flicker unit is not operating as expected, consider the following common issues:
- No Light/Flicker:
- Check the power supply: Ensure it is connected and providing the correct voltage.
- Verify wiring: Confirm that all wires are securely connected and that polarity is correct (positive to positive, negative to negative).
- Inspect for damage: Look for any visible damage to the wires or the circuit board.
- Irregular Flicker:
- Ensure stable power: Fluctuations in power supply can affect performance.
- Check connections: Loose connections can cause intermittent operation.
If problems persist after checking these points, contact customer support for further assistance.
8. Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 3.15 x 0.47 x 6.1 inches (8 x 1.2 x 15.5 cm) |
| Item Weight | 0.01 ounces (0.28 grams) |
| Model Number | 180695 |
| Manufacturer Recommended Age | 14 years and up |
| Manufacturer | Gebr. FALLER GmbH |
| Date First Available | August 20, 2012 |
| Material | Highly detailed plastic |
9. Warranty and Support
For information regarding product warranty, returns, or technical support, please contact the manufacturer directly.
- Manufacturer: Gebr. FALLER GmbH
- Contact Information: Please refer to the official FALLER website or the packaging for the most current contact details for customer service and support.
When contacting support, please have your product model number (180695) and purchase information readily available.
