Introduction
This manual provides comprehensive instructions for the operation and maintenance of your new Sharp Aquos LCD TV Remote Control, model RRMCGA535WJSA. This genuine Sharp remote transmitter is designed to provide seamless control over your compatible Sharp Aquos LCD TV models. Please read this manual thoroughly before use to ensure proper functionality and to maximize your viewing experience.
Safety Information
Please observe the following safety precautions:
- Do not expose the remote control to direct sunlight, high humidity, or extreme temperatures.
- Avoid dropping the remote control or subjecting it to strong impacts.
- Do not attempt to disassemble or modify the remote control. This may void the warranty and cause damage.
- Keep batteries out of reach of children. If swallowed, seek immediate medical attention.
- Dispose of used batteries according to local regulations. Do not incinerate.
Package Contents
Verify that all items are present in the package:
- Sharp Aquos LCD TV Remote Control (Model: RRMCGA535WJSA)
- Instruction Manual (this document)
Note: Batteries are typically not included and must be purchased separately.
Product Overview
Familiarize yourself with the buttons and features of your remote control.
Figure 1: Front View of Remote Control
This image displays the front of the Sharp Aquos remote control, showing all primary buttons including power, input selection, channel, volume, numeric keypad, and navigation controls. The Sharp and Aquos logos are visible at the bottom.
Figure 2: Back View of Remote Control
This image shows the rear side of the Sharp Aquos remote control, highlighting the smooth, ergonomic design and the battery compartment cover.
Figure 3: Remote Control with Battery Compartment Open
This image illustrates the Sharp Aquos remote control with its battery compartment cover slid open, revealing the space for battery insertion.
Figure 4: Close-up of Hidden Panel
This close-up image shows the lower section of the Sharp Aquos remote control with its hinged panel opened, revealing additional function buttons such as SLEEP, AUDIO, AV MODE, and CC (Closed Caption).
Button Functions:
| Button | Function |
|---|---|
| POWER | Turns the TV on or off. |
| INPUT / SOURCE | Selects the input source (e.g., HDMI, AV, Component). |
| CH +/- | Changes the TV channel up or down. |
| VOL +/- | Adjusts the volume level. |
| MUTE | Mutes or unmutes the TV sound. |
| MENU | Opens the TV's on-screen menu. |
| ENTER | Confirms selections within the menu. |
| Navigation Arrows (Up/Down/Left/Right) | Navigates through menu options. |
| EXIT / RETURN | Exits the current menu or returns to the previous screen. |
| Numeric Keypad (0-9) | Directly enters channel numbers. |
| SLEEP (under hidden panel) | Sets the TV to turn off automatically after a set period. |
| AUDIO (under hidden panel) | Selects audio modes or tracks. |
| AV MODE (under hidden panel) | Adjusts picture and sound settings for different content types. |
| CC (Closed Caption) (under hidden panel) | Turns closed captions on or off. |
Setup
Battery Installation:
- Locate the battery compartment on the back of the remote control (refer to Figure 2).
- Slide the battery compartment cover downwards to open it (refer to Figure 3).
- Insert two (2) AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Note: Always use new batteries of the same type. Do not mix old and new batteries, or different types of batteries.
Operating Instructions
Basic Operation:
- Power On/Off: Press the POWER button to turn your Sharp Aquos TV on or off.
- Volume Control: Press the VOL + button to increase volume and VOL - to decrease volume.
- Channel Selection: Use the CH + or CH - buttons to change channels sequentially. Alternatively, use the numeric keypad to directly enter a channel number.
- Input Source Selection: Press the INPUT or SOURCE button to cycle through available input sources (e.g., HDMI 1, HDMI 2, AV, Component).
- Mute: Press the MUTE button to temporarily silence the TV audio. Press again to restore sound.
Menu Navigation:
- Press the MENU button to display the TV's on-screen menu.
- Use the Navigation Arrows (Up, Down, Left, Right) to move through menu options.
- Press the ENTER button to select a highlighted option or confirm a setting.
- Press the EXIT or RETURN button to close the menu or go back to the previous menu level.
Advanced Functions (Hidden Panel):
Some advanced functions are located under a hinged panel at the bottom of the remote control (refer to Figure 4). Gently open this panel to access buttons such as:
- SLEEP: Sets a timer for the TV to automatically turn off.
- AUDIO: Adjusts audio settings or selects audio tracks.
- AV MODE: Cycles through preset picture and sound modes (e.g., Standard, Movie, Game).
- CC (Closed Caption): Toggles closed captions on or off.
Maintenance
Cleaning:
To clean the remote control, wipe it gently with a soft, dry cloth. Do not use liquid cleaners, abrasive cleaners, or chemical solvents, as these may damage the surface or internal components.
Battery Replacement:
Replace batteries when the remote control's response becomes sluggish or stops working. Follow the battery installation steps outlined in the "Setup" section. Always replace both batteries at the same time.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not working. | Dead or incorrectly inserted batteries. | Replace batteries with new ones, ensuring correct polarity (+/-). |
| Remote control range is poor. | Weak batteries; obstruction between remote and TV; infrared sensor on TV is blocked. | Replace batteries. Ensure no objects are blocking the line of sight between the remote and the TV's IR sensor. |
| Specific buttons not responding. | Dirt or debris under the button; internal malfunction. | Clean the remote control. If the issue persists, the remote may require replacement. |
| TV not responding to any remote commands. | TV is unplugged or turned off; TV's IR sensor is faulty. | Ensure the TV is powered on and plugged in. Test with another remote if available. Consult TV's manual for IR sensor location. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | RRMCGA535WJSA |
| Brand | Sharp |
| Compatible Devices | Sharp Aquos LCD Televisions (various models, see product title for list) |
| Connectivity Technology | Infrared (IR) |
| Power Source | 2 x AAA Batteries (not included) |
| Dimensions (Approx.) | 8.8 x 2.4 x 0.9 inches (Package Dimensions) |
| Weight (Approx.) | 4 ounces |
| Special Feature | Ergonomic design, Hidden function panel |
Warranty and Support
Legal Disclaimer:
This item is provided in new condition. Please note that this item is offered "as is" as it is past its original manufacturer's warranty period. Any implied warranties are disclaimed to the fullest extent permitted by law.
Customer Support:
For further assistance or inquiries regarding your Sharp Aquos LCD TV, please refer to your television's original instruction manual or visit the official Sharp support website. For issues specifically with this replacement remote control, please contact the seller from whom it was purchased.
