Saft LSH14 Lithium 3.6V 5500 mAh C-Cell Battery Instruction Manual

1. Product Overview

The Saft LSH14 is a high-performance, single-use Lithium Thionyl Chloride (Li-SOCl2) C-cell battery designed for long-term applications requiring stable voltage and high energy density. This battery provides a nominal voltage of 3.6V and a capacity of 5500 mAh, making it suitable for various industrial and professional uses.

Image 1.1: The Saft LSH14 Lithium 3.6V 5500 mAh C-cell battery. This image shows the cylindrical shape and typical labeling of the battery.

2. Safety Information

Please read and understand all safety instructions before handling or using the Saft LSH14 battery. Failure to follow these instructions can result in fire, explosion, leakage, or other hazards.

• Do Not Recharge: This is a primary (non-rechargeable) battery. Attempting to recharge it may cause leakage, fire, or explosion.
• Do Not Disassemble: Do not open, puncture, or modify the battery. This can release hazardous materials.
• Avoid Short Circuits: Do not allow metal objects to contact both the positive (+) and negative (-) terminals simultaneously. This can cause excessive heat, fire, or explosion.
• Temperature Exposure: Do not expose the battery to extreme temperatures (above 85°C or below -60°C), direct sunlight, or fire. High temperatures can cause the battery to vent, leak, or explode.
• Water Exposure: Do not immerse the battery in water or allow it to get wet.
• Storage: Store batteries in their original packaging or in a non-conductive container to prevent short circuits.
• Disposal: Dispose of used batteries according to local regulations. Do not dispose of in household waste or incinerate.
• Keep Out of Reach of Children: Batteries can be a choking hazard and may cause serious injury if swallowed. Seek immediate medical attention if a battery is swallowed.
• Handling Leaking Batteries: If a battery leaks, avoid contact with the fluid. If contact occurs, wash affected areas thoroughly with water.

3. Setup and Installation

The Saft LSH14 battery is designed for straightforward installation in compatible devices. Follow these steps for proper setup:

1. Identify Battery Compartment: Locate the battery compartment in your device. Refer to your device's instruction manual for specific details.
2. Observe Polarity: Carefully note the positive (+) and negative (-) markings inside the battery compartment and on the Saft LSH14 battery.
3. Insert Battery: Insert the Saft LSH14 battery into the compartment, ensuring that the positive (+) terminal aligns with the positive (+) marking in the compartment, and the negative (-) terminal aligns with the negative (-) marking. Incorrect polarity can prevent the device from functioning and may damage the battery or device.
4. Secure Compartment: Close the battery compartment securely according to your device's design.

Ensure the device is turned off before installing or replacing batteries.

4. Operating Instructions

Once correctly installed, the Saft LSH14 battery will provide power to your compatible device. As a primary (non-rechargeable) battery, its operation is automatic upon proper installation.

• Power On Device: After installation, turn on your device as per its own operating instructions.
• Expected Lifespan: The lifespan of the battery will vary depending on the device's power consumption and usage patterns.
• End of Life: When the battery is depleted, the device will typically cease to function or indicate low power. Replace the battery with a new Saft LSH14 or equivalent, following the installation steps.

5. Maintenance and Storage

Proper maintenance and storage can help ensure the safety and optimal performance of your Saft LSH14 battery.

• Storage Conditions: Store unused batteries in a cool, dry place, ideally between +10°C and +25°C (50°F and 77°F). Avoid extreme temperatures and high humidity.
• Original Packaging: Keep batteries in their original packaging until ready for use to prevent accidental short circuits.
• Long-Term Storage: If a device will not be used for an extended period, it is recommended to remove the battery to prevent potential leakage and damage to the device.
• Cleaning: If battery terminals become dirty, gently wipe them with a clean, dry cloth. Do not use water or cleaning agents.

6. Troubleshooting

If your device is not functioning correctly after installing the Saft LSH14 battery, consider the following troubleshooting steps:

• Device Not Powering On:
  • Verify that the battery is inserted with the correct polarity (+ and -).
  • Ensure the battery compartment is closed securely.
  • Check if the battery is new and not depleted.
  • Inspect battery terminals and device contacts for any dirt or corrosion. Clean if necessary.
  • Test the device with another new, compatible battery if available, to rule out a device malfunction.
• Shortened Battery Life:
  • Ensure the battery is stored correctly before use.
  • Verify that the device is not drawing excessive current or has a fault.
  • Consider environmental factors; extreme temperatures can affect battery performance.

If issues persist, consult the instruction manual for your specific device or contact the device manufacturer for support.

7. Specifications

8. Disposal Information

Do not dispose of batteries in general household waste. Lithium batteries contain materials that can be harmful to the environment if not disposed of properly. Please recycle used batteries at designated collection points or return them to authorized recycling facilities in accordance with local and national regulations. For more information on battery recycling, contact your local waste management authority.