Microsoft Wedge Touch Mouse User Manual

1. Introduction

The Microsoft Wedge Touch Mouse is a compact, wireless mouse designed for portability and efficient navigation. It features a touch-sensitive surface for intuitive scrolling and utilizes Bluetooth connectivity, eliminating the need for a USB transceiver. BlueTrack Technology allows the mouse to function on a variety of surfaces.

Image 1: Top view of the Microsoft Wedge Touch Mouse, showcasing its compact and minimalist design.

2. Setup

2.1 Battery Installation

1. Locate the battery compartment on the underside of the mouse.
2. Gently slide the silver end cap to open the compartment.
3. Insert one AA alkaline battery, ensuring correct polarity (+/-).
4. Close the compartment by sliding the end cap back into place until it clicks securely.

Image 2: The Microsoft Wedge Touch Mouse with its end cap removed, revealing the battery compartment for AA battery insertion.

2.2 Bluetooth Pairing

The Wedge Touch Mouse connects wirelessly via Bluetooth, requiring no USB transceiver. Ensure your device (computer or tablet) has Bluetooth enabled.

1. Turn on the mouse. A small indicator light may illuminate.
2. On your computer or tablet, navigate to the Bluetooth settings.
3. Initiate a search for new Bluetooth devices.
4. Select "Microsoft Wedge Touch Mouse" from the list of available devices.
5. Follow any on-screen prompts to complete the pairing process.

Note: Advanced functionality may not be available with all devices. Refer to your device's compatibility information. A PC/Tablet that supports Bluetooth technology is required.

3. Operating Instructions

3.1 Touch Surface Interaction

The mouse features a touch-sensitive surface that responds to single-finger gestures for navigation.

• Left Click: Press the left side of the touch surface.
• Right Click: Press the right side of the touch surface while slightly lifting your left finger.
• Vertical Scrolling: Stroke one finger vertically (up or down) on the touch surface. A gentle swipe scrolls slowly, while a flick scrolls quickly. Tap to stop scrolling.
• Horizontal Scrolling: Stroke one finger horizontally (left or right) on the touch surface. This is particularly useful for navigating wide documents or the Windows 8 Start Screen.

Image 3: Top view of the Microsoft Wedge Touch Mouse, illustrating the touch-sensitive surface for gesture-based navigation.

3.2 BlueTrack Technology

BlueTrack Technology enables the mouse to track on a wide variety of surfaces, including rough wood, carpet, and even some fabrics. This enhances usability in diverse environments.

Note: BlueTrack Technology does not work on clear glass or mirrored surfaces.

3.3 Power Management (Backpack Mode)

The Wedge Touch Mouse is designed to conserve battery power. When your connected PC or tablet is shut down or hibernating, the mouse automatically enters "Backpack Mode." In this mode, the mouse powers down, preventing accidental battery drain when stored in a bag or not in use.

4. Maintenance

4.1 Battery Replacement

When the mouse's performance degrades or the indicator light suggests low power, replace the AA battery following the installation steps in Section 2.1.

4.2 Cleaning

To clean the mouse, use a soft, lint-free cloth. For stubborn marks, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive materials, as these can damage the surface.

5. Troubleshooting

5.1 Connectivity Issues

• Ensure Bluetooth is Enabled: Verify that Bluetooth is active on your computer or tablet.
• Re-pair the Device: If the connection is lost, try removing the mouse from your device's Bluetooth list and re-pairing it.
• Check Battery: A low battery can cause intermittent connectivity. Replace the AA battery if necessary.
• System Power Settings: Some operating systems (e.g., Windows 8.1/10) may have power-saving settings that disable Bluetooth devices or put them into low-power modes, leading to disconnects or lag. Check your device's power management settings for Bluetooth adapters and ensure they are set to maximum performance or prevented from shutting off to save power.

5.2 Laggy or Jumpy Cursor

• Surface Compatibility: While BlueTrack is versatile, ensure you are not using the mouse on clear glass or mirrored surfaces.
• Interference: Other wireless devices or strong electromagnetic fields can interfere with Bluetooth signals. Try moving the mouse closer to your device or away from potential interference sources.
• System Resources: Ensure your computer or tablet is not under heavy load, which can affect mouse responsiveness.
• Power Settings: As mentioned in connectivity issues, power-saving settings can cause lag. Adjust these settings for optimal performance.

5.3 Scrolling Issues

• Finger Placement: Ensure your finger is making proper contact with the touch surface for scrolling gestures.
• Application Compatibility: While 4-way scrolling is optimized for Windows 8, some applications may not fully support horizontal scrolling or may have specific scrolling behaviors.

6. Specifications

7. Safety Information

Please be aware that this device requires a PC or tablet that supports Bluetooth technology for proper operation.

8. Support and Warranty

For technical support, driver updates, or further assistance, please visit the official Microsoft support website. Specific warranty details for your region may be available on the product packaging or through the Microsoft support portal.

Please note that the provided product information indicates that returns are only accepted if the product is still factory sealed.