Microsoft U6R-00001

Microsoft Wedge Mobile Keyboard User Manual

Model: U6R-00001

1. Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Microsoft Wedge Mobile Keyboard (Model U6R-00001). Designed for portability and efficiency, this Bluetooth keyboard is compatible with various tablet devices, including those running Windows, iPad, and most Android operating systems.

Top-down view of the Microsoft Wedge Mobile Keyboard

Figure 1: Top-down view of the Microsoft Wedge Mobile Keyboard, showcasing its compact layout.

Angled view of the Microsoft Wedge Mobile Keyboard

Figure 2: Angled view of the Microsoft Wedge Mobile Keyboard, highlighting its slim profile and key design.

2. Setup

2.1 Battery Installation

The Microsoft Wedge Mobile Keyboard requires two AAA alkaline batteries (included). Follow these steps to install them:

  1. Locate the battery compartment on the underside of the keyboard. This compartment also forms the wedge-shaped stand.
  2. Gently slide or lift the battery compartment cover to open it.
  3. Insert two AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Replace the battery compartment cover, ensuring it clicks securely into place.
Side view of the Microsoft Wedge Mobile Keyboard showing the battery compartment

Figure 3: Side view of the keyboard, illustrating the integrated battery compartment and its wedge design.

2.2 Bluetooth Pairing

To connect your keyboard to a tablet or other compatible device via Bluetooth, follow these steps:

  1. Ensure the keyboard has fresh batteries installed.
  2. Remove the protective cover from the keyboard. This action powers on the keyboard.
  3. On your tablet or device, enable Bluetooth and set it to "discoverable" mode. Refer to your device's manual for specific instructions.
  4. Locate the Bluetooth pairing button on the keyboard (usually near the battery compartment). Press and hold this button for approximately 3-5 seconds until an indicator light (if present) begins to flash, signifying it is in pairing mode.
  5. On your device, select "Microsoft Wedge Mobile Keyboard" from the list of available Bluetooth devices.
  6. If prompted, enter the pairing code displayed on your device into the Wedge Mobile Keyboard and press Enter.
  7. Once paired, the indicator light on the keyboard will stop flashing, and your device will confirm the connection.

3. Operating the Keyboard

3.1 Keyboard Features

The Wedge Mobile Keyboard includes several features designed to enhance your tablet experience:

  • Full-sized Keyset: Provides a comfortable and efficient typing experience.
  • Windows 8 Shortcut Keys: Dedicated keys for quick access to common Windows 8 functions such as Search, Share, Devices, and Settings.
  • Media Keys: Control audio and video playback with dedicated keys for play/pause, next track, previous track, and volume control.
  • Windows Start Button: Press to launch the Start menu on compatible Windows devices.
  • Light-Touch Keys: Engineered for a responsive and pleasant typing feel.

3.2 Multi-purpose Cover

The keyboard's durable cover serves multiple functions:

  • Protection: When snapped onto the keyboard, it protects the keys from scratches and dust during transport.
  • Automatic Power Off: Attaching the cover automatically powers down the keyboard to conserve battery life.
  • Tablet Stand: The cover can be folded and converted into a stable stand for your tablet, allowing for an optimal viewing and typing angle.
Microsoft Wedge Mobile Keyboard with cover partially open

Figure 4: The keyboard with its cover partially open, demonstrating its protective design.

Microsoft Wedge Mobile Keyboard with tablet in stand

Figure 5: The keyboard in use with a tablet positioned in its converted cover stand.

3.3 Product Overview Video

Watch this video for a visual demonstration of the Microsoft Wedge Mobile Keyboard's features and functionality, including its multi-purpose cover and Windows 8 shortcut keys.

Video 1: Official overview of the Microsoft Wedge Mobile Keyboard, demonstrating its design and key features.

4. Maintenance

4.1 Cleaning

To maintain your keyboard's appearance and functionality:

  • Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the surface of the keyboard and cover.
  • Avoid using abrasive cleaners, solvents, or aerosol sprays directly on the keyboard.
  • For cleaning between keys, use compressed air to remove dust and debris.

4.2 Battery Replacement

When the battery indicator light (if present) signals low power, or if the keyboard becomes unresponsive, replace the batteries:

  1. Remove the battery compartment cover as described in Section 2.1.
  2. Remove the old AAA batteries.
  3. Insert two new AAA alkaline batteries, observing correct polarity.
  4. Replace the battery compartment cover.
  5. Dispose of old batteries according to local regulations.

5. Troubleshooting

5.1 Connection Issues

  • Keyboard not connecting:
    • Ensure Bluetooth is enabled on your device.
    • Check that the keyboard batteries are not depleted. Replace if necessary.
    • Try re-pairing the keyboard with your device (refer to Section 2.2).
    • Ensure the keyboard is within the effective range of your Bluetooth device (typically up to 10 meters or 33 feet).
    • Remove any potential sources of interference, such as other wireless devices.
  • Lag or intermittent connection:
    • Move the keyboard closer to your device.
    • Check for other Bluetooth devices that might be causing interference.
    • Ensure your device's operating system and Bluetooth drivers are up to date.

5.2 Key Functionality

  • Keys not responding:
    • Verify that the keyboard is powered on and successfully paired.
    • Check battery levels and replace if low.
    • Ensure no debris is lodged under the keys.
    • Restart your device and try connecting again.
  • Shortcut keys not working:
    • Ensure your device's operating system is compatible with the specific shortcut keys (e.g., Windows 8 hotkeys require Windows 8 or later).
    • Some operating systems (like iOS or Android) may have limited functionality for certain Windows-specific keys.

6. Specifications

Below are the technical specifications for the Microsoft Wedge Mobile Keyboard (Model U6R-00001):

FeatureDetail
BrandMicrosoft
Model NumberU6R-00001
Connectivity TechnologyBluetooth
Wireless Type2.4 GHz Radio Frequency
Compatible DevicesTablet (Windows, iPad, most Android tablets)
Operating System CompatibilityWindows 8, Windows RT, Windows 7 (Basic functionality on ARM-based devices)
Power SourceBattery Powered
Batteries Required2 AAA alkaline batteries (included)
Item Weight1.3 pounds
Product Dimensions (LxWxH)10.1 x 3.97 x 0.82 inches
ColorBlack
MaterialAcrylonitrile Butadiene Styrene
Compatibility chart for Microsoft Wedge Mobile Keyboard

Figure 6: Detailed compatibility chart for the Microsoft Wedge Mobile Keyboard across various operating systems.

7. Warranty and Support

For warranty information, technical support, or to access additional resources, please visit the official Microsoft support website. Details regarding product registration and service options can be found there.

Official Microsoft Support: support.microsoft.com

© 2023 Microsoft Corporation. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.