Introduction
This manual provides detailed instructions for the proper use and care of your Seiko Sportura FC Barcelona SNAE93 Chronograph watch. This timepiece features a quartz movement, chronograph functions, and an alarm. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.
Image: Detail of the FC Barcelona logo, a prominent design element on the Seiko Sportura SNAE93 watch, showcasing its vibrant colors and intricate stitching.
Image: Front view of the Seiko Sportura FC Barcelona SNAE93 watch, highlighting its black dial, chronograph features, and red and black polyurethane strap.
Setup
1. Setting the Time
- Pull the crown out to the second click position.
- Turn the crown to set the hour and minute hands.
- Push the crown back in to the normal position.
2. Setting the Date
- Pull the crown out to the first click position.
- Turn the crown clockwise to set the date.
- Push the crown back in to the normal position.
- Note: Avoid setting the date between 9:00 PM and 3:00 AM, as this may interfere with the automatic date change mechanism.
3. Chronograph Hand Position Adjustment (Zero Reset)
If the chronograph hands do not return to the zero position after reset, they may need adjustment.
- Pull the crown out to the second click position.
- Press button A (top pusher) to adjust the 60-second chronograph hand.
- Press button B (bottom pusher) to adjust the 60-minute chronograph hand.
- Once all chronograph hands are aligned to the zero position, push the crown back in to the normal position.
4. Setting the Alarm
The 12-hour sub-dial at the 6 o'clock position functions as an alarm.
- Pull the crown out to the first click position.
- Press button B (bottom pusher) to set the alarm time. The alarm hand will move.
- Align the alarm hand to the desired alarm time.
- Push the crown back in to the normal position.
- To activate the alarm, press button A (top pusher) once. The alarm will sound at the set time.
- To deactivate the alarm, press button A again.
Operating the Watch
1. Basic Timekeeping
Once the time is set, the watch will keep accurate time using its quartz movement. The hour, minute, and second hands indicate the current time.
2. Using the Chronograph
The chronograph measures elapsed time up to 60 minutes in 1/5 second increments.
- Press button A (top pusher) to start the chronograph.
- Press button A again to stop the chronograph.
- Press button B (bottom pusher) to reset the chronograph hands to zero.
- Split Time Measurement:
- Press button A to start.
- Press button B to measure split time (the chronograph hands will stop, but timing continues internally).
- Press button B again to display the current elapsed time.
- Press button A to stop.
- Press button B to reset.
3. Water Resistance
This watch is water resistant to 100 meters (330 feet). This rating makes it suitable for swimming and snorkeling, but not for diving. Ensure the crown is fully pushed in before any contact with water. Do not operate the crown or pushers while the watch is wet or submerged.
Maintenance
1. Cleaning
Wipe the watch case and strap regularly with a soft, dry cloth to remove dirt and moisture. For the polyurethane strap, a mild soap solution and a soft brush can be used, followed by rinsing with clean water and thorough drying. Avoid harsh chemicals or abrasive materials.
2. Battery Replacement
When the battery is low, the second hand may move in two-second intervals. This indicates that the battery needs to be replaced. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
3. Storage
When not wearing the watch for extended periods, store it in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch stops or runs inaccurately. | Low battery. | Replace battery (professional service recommended). |
| Chronograph hands do not reset to zero. | Misalignment. | Perform chronograph hand position adjustment (see Setup section). |
| Date does not change at midnight. | Date set during restricted hours or incorrect time setting. | Reset the time and date, ensuring the time is set correctly for AM/PM. |
| Water ingress. | Crown not fully pushed in, or operated underwater. | Immediately take to a service center. Avoid further contact with water. |
Specifications
- Model Number: SNAE93
- Movement: Japanese Quartz
- Case Material: Stainless Steel
- Case Diameter: 42 mm
- Case Thickness: 11 mm
- Crystal: Hardlex
- Strap Material: Polyurethane
- Water Resistance: 100 meters (330 feet)
- Functions: Chronograph (60-second, 60-minute, 12-hour alarm), Date, Hour, Minute, Second
- Dial Type: Analog with Luminous Hands and Markers
Warranty and Support
Your Seiko watch is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and service procedures, please refer to the warranty card included with your purchase or visit the official Seiko website. For technical support or service inquiries, please contact an authorized Seiko service center.