Introduction
This manual provides instructions for the proper use and maintenance of your Kenmore Replacement Canister Vacuum Bare Surface Floor Brush. This attachment is designed for efficient cleaning of various bare floor surfaces, ensuring a gentle yet thorough clean.
Safety Information
Please read and understand all safety instructions before using this product.
- Always disconnect the vacuum cleaner from the power source before attaching or detaching the brush.
- Ensure the brush is securely attached to the vacuum wand before operation.
- Do not use this brush on wet surfaces or to pick up liquids.
- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
Product Overview
The Kenmore Bare Surface Floor Brush is a specialized attachment for canister vacuum cleaners, designed to efficiently clean hard floors without scratching. It features durable bristles and a swivel elbow for enhanced maneuverability.
Figure 1: A gray bare surface floor brush attachment for a canister vacuum cleaner, featuring a swivel neck for flexible cleaning.
Parts of the Brush
Familiarize yourself with the components of your new floor brush:
- Brush Head: The main cleaning surface with bristles.
- Swivel Elbow: Connects the brush head to the vacuum wand, allowing for rotational movement and improved maneuverability.
- Connection Port: The opening designed to fit compatible vacuum wands, often featuring a button-lock system.
- Horsehair Bristles: Soft, durable bristles for gentle yet effective cleaning of bare surfaces.
Figure 2: Close-up view of the underside of the gray floor brush, highlighting the horsehair bristles and the suction channels designed for dust and debris collection.
Installation Instructions
Follow these steps to properly attach the floor brush to your Kenmore canister vacuum:
- Identify Compatibility: Verify that your Kenmore canister vacuum's wand has a button-lock system compatible with the brush's connection port. Please note: This brush does not fit new style Kenmore models. Check your existing part to ensure a match.
- Align and Attach: Align the connection port of the floor brush with the end of your vacuum's wand.
- Secure Connection: Push the brush firmly onto the wand until you hear a click, indicating it is securely locked in place. Ensure the connection is stable before use.
- Detaching: To remove the brush, press the release button on the vacuum wand and pull the brush off.
Video 1: This video demonstrates the unpacking and attachment process of the Kenmore Canister Vacuum Floor Brush, showing how to connect it to a vacuum wand and highlighting its horsehair bristles.
Operating Instructions
This brush is specifically designed for bare floor surfaces. Follow these guidelines for optimal cleaning:
- Surface Suitability: The brush is ideal for cleaning hardwood, linoleum, laminate, marble, and tile floors.
- Maneuverability: Utilize the swivel elbow to easily navigate around furniture and into tight spaces. The brush's design allows for cleaning under low-lying objects and reaching high areas by adjusting the wand angle.
- Effective Cleaning: The horsehair bristles gently sweep fine dust and debris into the vacuum's suction path, providing thorough cleaning without scratching delicate surfaces.
- Avoid Carpets: This brush is not intended for use on carpets or rugs, as it lacks a rotating brush roll for deep carpet cleaning.
Figure 3: The Kenmore bare surface floor brush in action, effectively cleaning a wooden floor, demonstrating its suitability for hard surfaces.
Maintenance and Care
Proper maintenance will extend the life and performance of your floor brush:
- Regular Cleaning: Periodically inspect the bristles for accumulated hair or debris. Use scissors to carefully cut away any tangled hair from the bristles.
- Wipe Down: Wipe the exterior of the brush with a damp cloth to remove dust and grime. Do not immerse the brush in water.
- Storage: Store the brush in a dry place, ideally attached to the vacuum or in a designated accessory holder, to prevent damage to the bristles.
Troubleshooting
If you encounter any issues, refer to the following common problems and solutions:
Brush Not Picking Up Debris Effectively
- Check Bristles: Ensure bristles are clean and free of obstructions.
- Vacuum Suction: Verify that your vacuum cleaner is operating with adequate suction. Check the vacuum's bag/canister and filters.
- Proper Attachment: Confirm the brush is securely attached to the wand.
Brush Not Fitting Vacuum Wand
- Verify Compatibility: Double-check your vacuum model's compatibility with this brush. This brush is designed for specific Kenmore canister models with a button-lock system.
- Inspect Connection Port: Ensure there are no obstructions or damage to the brush's connection port or the vacuum wand.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Kenmore |
| Model Number | 46-1502-01 |
| Material | Horse Hair |
| Color | Gray |
| Specific Uses | Floor |
| Surface Recommendation | Hardwood, Linoleum, Laminate, Marble, Tile |
| Item Weight | 5 ounces |
| Package Dimensions | 8.94 x 4.49 x 3.46 inches |
| UPC | 616469467805 |
Figure 4: A visual representation of the Kenmore bare surface floor brush with key dimensions indicated, including its width and connection port size.
Warranty and Support
For warranty information or technical support regarding your Kenmore Replacement Canister Vacuum Bare Surface Floor Brush, please refer to your original Kenmore vacuum cleaner manual or contact Kenmore customer service directly. Keep your purchase receipt for any warranty claims.
