GoPro ARMTE-001

GoPro ARMTE-001 Wi-Fi Remote Instruction Manual

Model: ARMTE-001

Introduction

This manual provides essential information for the safe and effective use of your GoPro ARMTE-001 Wi-Fi Remote. Please read these instructions thoroughly before operating the device to ensure optimal performance and longevity.

Product Overview

The GoPro ARMTE-001 Wi-Fi Remote allows you to control your GoPro camera wirelessly from a distance. It provides access to all camera settings, power on/off, and recording start/stop functions, simplifying camera operation in various scenarios. The remote's LCD screen mirrors the status display of your GoPro camera for easy monitoring.

GoPro ARMTE-001 Wi-Fi Remote, a black rectangular device with two large buttons and a small LCD screen.

This image displays the GoPro ARMTE-001 Wi-Fi Remote, a compact black device designed for remote control of GoPro cameras. It features two prominent control buttons and a small LCD screen for status display.

Key Features:

  • Wireless control of GoPro cameras.
  • Access to camera settings, power, and recording functions.
  • LCD screen mirrors camera status.
  • Waterproof up to 10 feet (3 meters).
  • Capable of controlling up to 50 cameras simultaneously.
  • Optimal range of 600 feet (180 meters) in ideal conditions.

Package Contents:

  • GoPro ARMTE-001 Wi-Fi Remote
  • Charging Cable
  • Keychain attachment

Setup

Charging the Remote:

Before first use, fully charge the Wi-Fi Remote using the provided charging cable. Connect the cable to the remote and a standard USB power source. The charging indicator will show the charging status.

Pairing with Your GoPro Camera:

  1. Ensure your GoPro camera's Wi-Fi is enabled.
  2. On your GoPro camera, navigate to the Wireless settings and select 'Wi-Fi Remote' or 'Pair New Device'.
  3. On the ARMTE-001 remote, power it on.
  4. Follow the on-screen prompts on both the camera and the remote to complete the pairing process. A confirmation message will appear once successfully paired.

Operating Instructions

Basic Controls:

  • Power On/Off: Press and hold the Power button (often the Mode button) on the remote to turn it on or off.
  • Start/Stop Recording: Press the Shutter/Select button to start recording. Press it again to stop recording.
  • Change Modes/Settings: Use the Mode button to cycle through camera modes. Use the Shutter/Select button to confirm selections or adjust settings as displayed on the remote's LCD screen.

Multi-Camera Control:

The remote can control up to 50 GoPro cameras simultaneously. Ensure all cameras are within range and properly paired to the remote for this functionality.

Maintenance

Waterproofing:

The remote is waterproof up to 10 feet (3 meters). Ensure all ports are securely closed before exposing it to water. After use in saltwater, rinse the remote thoroughly with fresh water and dry it completely.

Cleaning:

Clean the remote with a soft, damp cloth. Do not use harsh chemicals, cleaning solvents, or strong detergents, as these may damage the device.

Battery Care:

To prolong battery life, avoid exposing the remote to extreme temperatures. Recharge the battery regularly, even if the device is not in frequent use, to maintain its capacity.

Troubleshooting

  • Remote Not Powering On: Ensure the battery is charged. Connect to a power source using the provided cable and check the charging indicator.
  • Remote Not Pairing with Camera:
    • Ensure both the remote and camera are fully charged.
    • Verify the camera's Wi-Fi is enabled and in pairing mode.
    • Move the remote closer to the camera.
    • Try resetting the Wi-Fi connections on both devices and attempt pairing again.
  • Limited Range: Ensure there are no physical obstructions between the remote and the camera. Avoid environments with strong Wi-Fi interference. The stated range of 600 feet (180 meters) is for optimal conditions; actual range may vary based on environmental factors.
  • LCD Screen Not Displaying Correctly: Ensure the remote is powered on and properly paired. If the issue persists, try restarting the remote.

Specifications

FeatureDetail
BrandGoPro
Model NameWIFI REMOTE
Model NumberARMTE-001
ColorBlack
Connectivity TechnologyWi-Fi
Controller TypeWi-Fi
Number of Buttons2
Maximum Range600 feet (180 meters) in optimal conditions
Waterproof Depth10 feet (3 meters)
Maximum Supported Devices50 cameras
Battery Type1 Lithium metal (included), Lithium-ion
Item Weight100 Grams
Compatible DevicesGoPro Cameras

Warranty and Support

Manufacturer Warranty:

This product is covered by a 2-year manufacturer warranty.

Customer Support:

For further assistance, technical support, or warranty claims, please refer to the official GoPro support website or contact their customer service directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.