Introduction
This manual provides essential instructions for the proper installation, setup, operation, and maintenance of your CISA DGT Vision 182710410 Electronic Wall Safe. Please read this manual thoroughly before using the safe to ensure optimal security and functionality. Keep this manual for future reference.
Image: The CISA DGT Vision electronic wall safe, highlighting its external dimensions (42cm width, 30cm height, 25cm depth) and a removable internal shelf.
Safety Information
For detailed safety guidelines, please refer to the official Safety Information PDF document provided by CISA. It is crucial to follow all safety precautions to prevent injury and ensure the safe operation of the product.
Package Contents
Verify that all the following components are included in your package:
- CISA DGT Vision Electronic Wall Safe
- External Power Cable
- Instruction Sheet
- Installation Instructions
- Removable Shelf
Installation
Proper installation is critical for the security of your CISA DGT Vision Electronic Wall Safe. For detailed, step-by-step installation instructions, please refer to the official Installation Manual PDF.
Download Installation Manual (PDF)
General Installation Guidelines:
- Choose a discreet and secure location within a wall.
- Ensure the wall structure can support the weight of the safe and its contents.
- Follow all local building codes and regulations.
- The safe features a 12 mm steel front and 22 mm diameter bolts for enhanced resistance against forced entry. Laser welding ensures maximum structural integrity, and a protective plate guards against drilling attempts.
Image: Illustration of the safe's construction, emphasizing laser-welded parts and a drill-resistant plate for enhanced security against intrusion.
Image: The CISA DGT Vision safe securely installed within a wall, demonstrating its discreet and robust integration.
Setup: Initial Code Programming
Before first use, you must program your personal access code. The safe is typically shipped with a factory default code (e.g., "123456" or "000000"). Refer to the instruction sheet for the exact default code and programming steps.
- With the safe door open, locate the programming button on the inside of the door (often a red or green button).
- Press the programming button. The keypad will illuminate, and an audible signal may sound.
- Enter your new 6-digit personal code on the 12-digit digital keypad.
- Press the '#' or 'ENTER' button to confirm.
- Test the new code several times with the door open before closing it.
Important: Do not close the safe door until you have successfully tested your new code multiple times.
Image: Key features of the safe, including the 12-digit digital keypad, 22mm diameter steel bolts, and a carbonitrided steel plate protecting the lock mechanism.
Image: A detailed view of the 12-digit digital keypad, which is backlit for easy operation in various lighting conditions.
Operating Instructions
Opening the Safe
- Enter your personal 6-digit code on the digital keypad. The keypad is backlit for visibility.
- Press the '#' or 'ENTER' button.
- A visual and audible signal will confirm correct entry. The internal light will activate for approximately 10 seconds.
- Turn the handle (if present) or pull the door open within a few seconds.
Closing the Safe
- Close the safe door firmly.
- Turn the handle (if present) to engage the bolts.
- The safe will automatically lock.
Emergency Power Supply
In case of battery depletion, the safe can be powered externally using the provided external power cable. Locate the external power port (usually near the keypad) and connect the cable to a suitable power source (e.g., a 9V battery pack, not always included). This will allow you to open the safe and replace the internal batteries.
Image: The safe's features for convenience, including an internal light and a backlit 12-digit keypad, ensuring usability in all conditions.
Image: The safe with its door open, revealing the spacious interior and a removable shelf for organized storage. Internal dimensions are approximately 40.2 cm (width) x 28.2 cm (height) x 20 cm (depth).
Maintenance
- Battery Replacement: Replace batteries annually or when the low battery indicator appears. Use high-quality alkaline batteries (typically AA or AAA, refer to the instruction sheet for exact type and quantity).
- Cleaning: Clean the exterior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents. The safe features a special oven-baked paint finish for excellent corrosion resistance.
- Mechanism Check: Periodically check the door hinges and locking bolts for smooth operation. Do not lubricate the electronic components.
Image: Detail showing the safe's surface with its special oven-baked paint, designed for superior corrosion resistance and durability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Safe does not open with code. | Incorrect code entered; batteries are low or dead. | Re-enter code carefully. Replace batteries. Use external power cable if batteries are completely dead. |
| Keypad does not respond. | Batteries are completely dead. | Use the external power cable to supply temporary power and open the safe. Replace internal batteries immediately. |
| Door does not close properly. | Obstruction in the door frame; bolts are not retracting fully. | Check for any obstructions. Ensure the door is aligned correctly. |
| Internal light not working. | Light bulb failure; battery issue. | Check batteries. If problem persists, contact customer support. |
Specifications
- Brand: CISA
- Model Number: 182710410
- External Dimensions (Width x Height x Depth): 42 x 30 x 25 cm (16.5 x 11.8 x 9.8 inches)
- Internal Dimensions (Width x Height x Depth): Approximately 40.2 x 28.2 x 20 cm (15.8 x 11.1 x 7.9 inches)
- Closure Type: Electronic Combination
- Material: Alloy Steel
- Frontal Steel Thickness: 12 mm
- Bolt Diameter: 22 mm
- Special Features: Backlit 12-digit keypad, internal light, visual/audible signals, laser-welded construction, drill protection plate, special oven-baked anti-corrosion paint, non-protruding opening mechanisms.
- Mounting Type: Wall Mount
- Weight: Approximately 26.46 lbs (12 kg)
- Color: Grey
- Country of Origin: Italy
Warranty and Support
Your CISA DGT Vision Electronic Wall Safe comes with a 12-month warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical assistance, warranty service, or to purchase replacement parts, please contact CISA customer support through their official website or the retailer where the product was purchased.
CISA Official Website: www.cisa.com
