Introduction
This manual provides essential instructions for the safe and effective use of your PWR+ 12V Car Charger. This charger is designed to power various compatible devices, including RCA Portable DVD Players and certain massage cushions, directly from your vehicle's 12V power outlet.
The PWR+ car charger features an extra-long 5.5 ft power cord and a steel-reinforced tip for enhanced durability. It delivers an output of 12V 2A (24W), compatible with devices requiring 9-12V and 1.5-2A.
Image: The PWR+ 12V Car Charger, featuring its coiled cable, car adapter plug, and DC barrel connector.
Compatibility
This PWR+ 12V Car Charger is compatible with a wide range of devices. Please verify your device's power requirements before use.
Compatible RCA Portable DVD Player Models:
- DRC615n, DRC6272, DRC6272e22, DRC628, DRC6282, DRC6289, DRC6292, DRC6296, DRC6309, DRC6317, DRC6317e, DRC6318e, DRC6327, DRC6327e, DRC6327ec, DRC6327el, DRC6331, DRC6331b, DRC6331r, DRC6338, DRC6338el, DRC6338r, DRC6338t, DRC6377, DRC6379t, DRC6389, DRC6389t, DRC69702, DRC69705, DRC69705e22, DRC69705e-blk2, DRC69707, DRC79981, DRC79981e, DRC79982, DRC96090, DRC96100, DRC97873, DRC97873i, DRC99371, DRC99371eb, DRC99392, DRC99392e
Compatible Massage Cushion Brands:
- Shiatsu Back Shoulder and Neck Massager, Neck Back Massage Cushion, Snailax, Naipo, Gideon, Relaxzen, Hrome, Zyllion, Renpho, Mo Cuishle
Image: Two RCA Portable DVD Players, examples of compatible devices for the PWR+ car charger.
Setup Instructions
- Verify Compatibility: Ensure your device requires 12V DC input and has a compatible barrel connector. The charger's output is 12V 2A (24W).
- Connect to Device: Insert the DC barrel connector end of the PWR+ car charger into the power input port of your portable DVD player or massage cushion.
- Connect to Vehicle: Insert the car adapter plug into your vehicle's 12V accessory outlet (cigarette lighter socket). Ensure a secure connection.
- Power Indicator: A green LED indicator on the car adapter plug will illuminate when power is supplied, indicating the charger is active.
Image: A close-up view of the car adapter plug and the DC barrel connector, highlighting the connection points.
Operating Instructions
Once connected, your device should begin to power on or charge, depending on its design. The charger is designed for continuous use within its specified voltage and current limits.
Safety Features:
- Overheating Protection: Integrated smart chip prevents the charger from overheating during operation.
- Overload Protection: High-quality wires and internal circuitry protect against excessive current draw.
- Anti-Interference Feature: Improved isolation materials minimize electromagnetic interference with other vehicle electronics.
- Incorrect Voltage Protection (IV): Safeguards against damage from incorrect voltage input.
- Short Circuit Protection (SC): Prevents damage in case of a short circuit.
- Internal Overheating Protection (IO): Additional protection against internal component overheating.
These features ensure safe and reliable power delivery to your devices.
Maintenance
To ensure the longevity and optimal performance of your PWR+ 12V Car Charger, follow these simple maintenance guidelines:
- Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cleaning: Use a soft, dry cloth to clean the exterior of the charger. Do not use liquid cleaners or solvents.
- Cable Care: Avoid sharp bends, kinks, or excessive pulling on the cable. Use the included hook-and-loop fastener to keep the cable neatly coiled when stored.
- Inspection: Periodically inspect the cable and connectors for any signs of damage, such as fraying, cuts, or bent pins. Discontinue use if damage is observed.
Troubleshooting
If you encounter issues with your PWR+ 12V Car Charger, please refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger LED not illuminated / Device not powering on. |
|
|
| Charger or device feels excessively hot. |
|
|
| Intermittent power connection. |
|
|
If these steps do not resolve the issue, please contact PWR+ customer support for further assistance.
Product Specifications
| Model Number | 260-PWR55-36993 |
| Input Voltage | 12V DC (from vehicle accessory outlet) |
| Output Voltage / Current | 12V 2A (24W) |
| Compatibility | Devices requiring 9-12V, 1.5-2A |
| Cord Length | 5.5 Feet (approx. 1.67 meters) |
| Dimensions (Product) | 4.5 x 3.7 x 1.2 inches |
| Item Weight | 0.01 ounces |
| Certifications | CE/FCC/RoHS certified |
| Manufacturer | PWR+ |
Warranty Information
PWR+ stands behind the quality of its products. This car charger comes with the following warranty:
- 30 Days Refund: If you are not satisfied with your purchase, you may be eligible for a refund within 30 days.
- 24 Months Exchange: The product is covered by a 24-month exchange warranty for manufacturing defects.
PWR+ is a company based in Washington, USA. For warranty claims or questions, please refer to the customer support section.
Image: A warranty badge indicating a 2-year warranty period.
Customer Support
For any questions, concerns, or assistance with your PWR+ 12V Car Charger, please contact our friendly customer support experts.
Please refer to the contact information provided with your product packaging or visit the official PWR+ website for the most current support details.
We are committed to providing reliable products and excellent customer service.