Ferplast HEMMY Bird Aviary Instruction Manual

1. Introduction and Overview

Thank you for choosing the Ferplast HEMMY Bird Aviary. This aviary is designed to provide a spacious and secure habitat for various bird species, including canaries, budgies, and lovebirds. It is suitable for both indoor and outdoor use, featuring a durable wooden structure and practical accessories for ease of care.

The HEMMY aviary includes essential accessories such as a rotating feeder, a drinker, multiple perches, and wheels for convenient relocation. Please read this manual carefully before assembly and use to ensure proper setup and maintenance of your bird's new home.

2. Safety Instructions

• Always read all instructions before assembling and using the aviary.
• Ensure all components are securely fastened during assembly to prevent instability.
• Place the aviary on a flat, stable surface. If used outdoors, ensure it is in a sheltered location protected from extreme weather conditions.
• Regularly inspect the aviary for any signs of wear or damage, especially to the wooden parts and wire mesh. Replace or repair damaged components immediately to ensure the safety of your birds.
• Keep small children and pets away from the aviary during assembly and ensure they do not interfere with the birds.
• The wooden structure requires careful handling and maintenance. Avoid harsh chemicals for cleaning that could harm the wood or your birds.

3. Package Contents

Before beginning assembly, verify that all parts are present and undamaged. The package should contain:

• Aviary panels (wooden frame and wire mesh)
• 1 x BRAVA rotating feeder
• 1 x Drinker
• 5 x Wooden perches
• 4 x Wheels
• Assembly hardware (screws, connectors, etc.)
• Instruction manual

4. Setup and Assembly

Assembly of the Ferplast HEMMY aviary is designed to be straightforward. It is recommended to have two people for easier assembly due to the size of the panels. Handle wooden components with care to prevent damage.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Inspect all components for any damage.
2. Attach Wheels: Securely attach the four wheels to the base of the aviary frame using the provided hardware. Ensure they are firmly in place for stability and mobility.
3. Assemble Frame: Follow the diagrams in the included paper manual to connect the side, front, and back panels. Ensure all screws are tightened, but do not overtighten to avoid stripping the wood.
4. Install Roof: Attach the roof panels to the top of the assembled frame.
5. Insert Removable Tray: Slide the plastic removable tray into the designated slot at the bottom of the aviary. This tray facilitates easy cleaning.
6. Install Perches: Place the five wooden perches at various heights within the aviary to provide ample resting and climbing opportunities for your birds.
7. Attach Feeder and Drinker: Secure the BRAVA rotating feeder and the drinker to the wire mesh at appropriate locations, ensuring they are easily accessible to your birds.

Figure 1: External dimensions of the Ferplast HEMMY Aviary.

Figure 2: Removable bottom tray for easy cleaning.

5. Operating Instructions (Daily Use)

Once assembled, the aviary is ready for your birds. Ensure fresh food and water are always available.

• Feeding: The BRAVA rotating feeder allows you to refill food without opening the main aviary door, minimizing bird escape risk. Simply rotate the feeder outwards, fill it, and rotate it back into position.

Figure 3: BRAVA rotating feeder in closed position (A).

Figure 4: BRAVA rotating feeder rotated outwards for refilling (B).

Figure 5: Refilling the BRAVA rotating feeder (C).

• Water: Ensure the drinker is always filled with clean, fresh water. Check daily and refill as needed.
• Placement: For outdoor use, position the aviary in a shaded area, protected from direct sunlight, strong winds, and predators. For indoor use, place it in a well-ventilated room away from drafts and extreme temperatures.
• Mobility: Use the integrated wheels to carefully move the aviary when necessary. Ensure the path is clear and stable to prevent tipping.

6. Maintenance

Regular cleaning and maintenance are crucial for the health and well-being of your birds and the longevity of the aviary.

• Daily Cleaning: Remove and clean the removable bottom tray daily to dispose of droppings and old food. Wash with mild soap and water, rinse thoroughly, and dry before returning it to the aviary.
• Feeder and Drinker: Clean the feeder and drinker daily to prevent bacterial growth. Use a brush to remove any residue and rinse thoroughly.
• Perches: Scrape off any droppings from the perches regularly. Periodically wash them with bird-safe disinfectant and allow them to dry completely.
• Wooden Structure: Clean the wooden parts with a damp cloth. Avoid using abrasive cleaners or excessive water, which can damage the wood. For deeper cleaning, use bird-safe wood cleaners. Ensure the wood is completely dry to prevent mold or mildew.
• Wire Mesh: Wipe down the wire mesh as needed to remove dust and debris.
• Deep Cleaning: Perform a thorough deep cleaning of the entire aviary at least once a month, or more frequently depending on the number of birds and their activity.

7. Troubleshooting

This section addresses common concerns you might encounter.

• Damaged Components Upon Arrival: If any parts are damaged during shipping, do not proceed with assembly. Contact Ferplast customer support or your retailer immediately for assistance and replacement parts.
• Instability: Ensure all screws and fasteners are properly tightened. Check that the aviary is placed on a level surface.
• Difficulty Cleaning Wooden Parts: Wood can be porous. Regular, light cleaning is more effective than infrequent, heavy cleaning. Use a slightly damp cloth and bird-safe cleaning solutions. Avoid soaking the wood.
• Birds Not Using Perches/Feeder: Ensure perches are at comfortable heights and the feeder/drinker are easily accessible. Birds may need time to adjust to a new environment.

8. Specifications

9. Warranty and Support

Ferplast products are designed for quality and durability. For information regarding warranty, returns, or specific product support, please refer to the following guidelines:

• Returns Policy: If you wish to return a product within 30 days of receipt because you have changed your mind, please consult the retailer's return policy.
• Defective or Damaged Products: If you have received a defective or damaged product, please consult the retailer's policy on defective or damaged goods. It is recommended to inspect the product upon delivery and report any issues immediately.
• Manufacturer Support: For any technical questions, missing parts, or further assistance, please contact Ferplast customer service directly. Contact information can typically be found on the Ferplast official website or on the product packaging.