Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your WMF Bueno Electric Kettle. Please read it thoroughly before first use and retain it for future reference.
Important Safety Instructions
To reduce the risk of fire, electric shock, or injury, always follow these basic safety precautions:
- Always ensure the kettle is placed on a stable, flat, heat-resistant surface.
- Do not immerse the kettle, power base, cord, or plug in water or other liquids.
- Keep out of reach of children.
- Unplug from outlet when not in use and before cleaning.
- Do not operate the kettle if it has a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- This appliance is equipped with safety features including auto shut-off, opened lid safety auto shut-off, boil-dry protection, and overheat protection.
- Only use the kettle with its supplied power base.
- Do not fill above the maximum water level indicator to avoid boiling water overflowing.
- Avoid contact with steam escaping from the spout when water is boiling.
- Do not open the lid while water is boiling.
Product Overview
Familiarize yourself with the components of your WMF Bueno Electric Kettle.
Figure 1: Front view of the WMF Bueno Electric Kettle, showcasing its stainless steel body and black handle and lid.
Figure 2: Close-up of the water level indicator, showing markings for 0.75L, 1.0L, 1.25L, 1.5L, and 1.7L (max).
Figure 3: Detail of the power switch located at the base of the handle, with '0' for off and '1' for on.
Figure 4: The kettle with its lid open, showing the removable limescale filter detached from the spout area.
Setup
- Unpacking: Carefully remove the kettle and all accessories from the packaging. Retain packaging for future storage or transport.
- First Use Cleaning: Before first use, fill the kettle with fresh water up to the MAX mark. Boil the water, then discard it. Repeat this process two to three times to remove any manufacturing residues.
- Placement: Place the power base on a dry, flat, and stable surface away from the edge of the countertop. Ensure the power cord is not dangling where it can be tripped over or pulled.
Operating Instructions
- Filling the Kettle: Open the lid and fill the kettle with the desired amount of fresh water. Do not fill below the MIN mark or above the MAX (1.7 litres) mark indicated on the water level indicator. Close the lid securely.
- Placing on Base: Place the kettle firmly onto its power base. The 360° rotatable base allows for easy placement from any angle.
- Connecting to Power: Plug the power cord into a suitable electrical outlet (220-240V / 50/60Hz).
- Boiling Water: Press the power switch down to the '1' (on) position. The indicator light will illuminate, signifying that the kettle is heating.
- Automatic Shut-off: The kettle will automatically switch off once the water has boiled. The indicator light will turn off, and the switch will return to the '0' (off) position.
- Pouring: Carefully lift the kettle from its base and pour the hot water. Be cautious of hot steam.
Maintenance
Cleaning
- Always unplug the kettle from the power outlet and allow it to cool completely before cleaning.
- Wipe the exterior of the kettle with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
- The interior can be rinsed with water. Do not immerse the kettle in water.
- The removable limescale filter can be detached and rinsed under running water. Ensure it is dry before reattaching.
Descaling
Regular descaling is important to maintain the kettle's performance and extend its lifespan, especially in areas with hard water.
- Fill the kettle with a mixture of water and a descaling agent (e.g., white vinegar or citric acid solution) according to the descaling agent's instructions.
- Boil the solution.
- Allow the solution to sit in the kettle for the recommended time (usually 15-30 minutes).
- Discard the solution and rinse the kettle thoroughly several times with fresh water to remove any residue.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not heat up. | Not plugged in; power switch not engaged; boil-dry protection activated. | Ensure plug is securely in outlet; press power switch to '1'; if boil-dry protection activated, remove kettle from base, let cool, then refill. |
| Water does not boil. | Lid not closed properly; insufficient water. | Ensure lid is securely closed; fill water above MIN mark. |
| Kettle switches off too soon. | Excessive limescale buildup. | Descale the kettle as per maintenance instructions. |
| Water tastes strange or has particles. | New kettle residue; limescale buildup. | Perform first use cleaning again; descale the kettle. |
| Kettle is noisy during operation. | Normal operation; limescale buildup. | Some noise is normal during boiling. If excessive, descale the kettle. |
| Water leaks from the lid. | Overfilled kettle. | Do not fill above the MAX mark. |
| Kettle does not turn off automatically. | Lid not closed properly. | Ensure the lid is securely closed. |
| Kettle smells burnt. | Boil-dry protection activated and kettle overheated. | Unplug immediately, let cool completely. If smell persists or visible damage, discontinue use and contact support. |
| Kettle is difficult to clean. | Hard water stains. | Regularly descale the kettle. For stubborn stains, use a specialized stainless steel cleaner. |
| Power cord is too short. | Standard cord length. | Do not use extension cords. Ensure the kettle is placed near a suitable outlet. |
| Kettle feels hot to touch. | Normal during operation. | Always handle the kettle by its cool-touch handle. |
Specifications
- Model: BUENO
- Brand: WMF
- Product Type: Electric Kettle
- Body Material: Stainless steel
- Capacity: 1.7 litres
- Max Power Consumption: 2400 W
- Voltage: 220 - 240 V / 50/60 Hz
- Dimensions (L x W x H): 9.84 x 8.27 x 6.5 inches (25 x 21 x 16.5 cm)
- Item Weight: 1.1 pounds (0.5 Kilograms)
- Special Features: Water level indicator, removable limescale filter, concealed heating element, stainless steel heating plate, 360° rotatable base.
- Safety Features: Auto shut-off, opened lid safety auto shut-off, boil-dry protection, overheat protection.
- Compliant Standards: Directive 2004/108/EC, Directive 2006/95/EC, Directive 2009/125/EC.
Warranty and Support
For warranty information and customer support, please refer to the official WMF website or contact their customer service directly. Keep your proof of purchase for warranty claims.
WMF Official Website: www.wmf.com
For service inquiries, please contact your local WMF service center.
