Roland PD-128

Download PDF
Contents

Roland PD-128 V-Pad Electronic Drum Pad Instruction Manual

Introduction

Welcome to the Roland PD-128 V-Pad instruction manual. This document provides essential information for the proper setup, operation, and maintenance of your electronic drum pad. The Roland PD-128 is a 12-inch mesh-head tom drum pad designed to offer a realistic drumming experience with advanced dual-triggering technology, including natural rim-shot sensing and adjustable head tension.

Roland PD-128 V-Pad electronic drum pad, showing the 12-inch mesh head and black chrome shell.

Image: The Roland PD-128 V-Pad, a 12-inch electronic drum pad featuring a white mesh head, black rubber rim, and black chrome shell. It is designed for realistic feel and dual-triggering capabilities.

Setup

Unpacking

Carefully remove all components from the packaging. Ensure the following items are present:

  • Roland PD-128 V-Pad
  • 2-way mount holder
  • Connection cables (typically stereo TRS cables, not always included with pad)

Mounting the V-Pad

The PD-128 V-Pad comes with a 2-way mount holder for attachment to a drum stand or rack.

  1. Securely attach the 2-way mount holder to your drum stand or rack using an appropriate clamp (not included).
  2. Insert the V-Pad into the mount holder. Ensure it is firmly seated and tightened to prevent movement during play.

Connecting to a Drum Module

The PD-128 V-Pad features dual-triggering for both the head and rim.

  1. Connect a stereo trigger cable (TRS cable) from the PD-128's output jack to the appropriate tom input on your Roland V-Drums sound module (e.g., TD-30).
  2. Ensure the cable is securely connected at both ends.
  3. Refer to your drum sound module's manual for specific input assignments and pad settings.

Operating Instructions

Adjusting Head Tension

The mesh head tension can be adjusted to suit your playing preference, mimicking the feel of an acoustic drum.

  1. Use a standard drum key to adjust the tension rods around the rim of the pad.
  2. Tighten or loosen the rods evenly to achieve the desired rebound and feel. Avoid overtightening, which can damage the mesh head.

Playing the V-Pad

The PD-128 offers realistic response for both head and rim shots.

  • Head Trigger: Strike the center of the mesh head for drum sounds.
  • Rim Trigger: Strike the rubber rim for rim shot sounds. The advanced sensor detects dynamics and depth for natural expression.

Customizing Shell Wrap (Optional)

The black chrome shell wrap is interchangeable, allowing for customization. Refer to Roland's official resources for information on acquiring and installing alternative shell wraps.

Maintenance

  • Cleaning: Wipe the pad and shell with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Avoid abrasive cleaners or solvents.
  • Mesh Head Care: Periodically check the mesh head for wear and tear. If the head becomes damaged or loses its responsiveness, it can be replaced.
  • Connections: Ensure all cables are free from kinks or damage. Secure connections prevent signal loss.
  • Storage: Store the V-Pad in a clean, dry environment away from extreme temperatures and direct sunlight.

Troubleshooting

This section addresses common issues you might encounter.

No Sound or Intermittent Sound

  • Check Cables: Ensure all trigger cables are securely connected to both the V-Pad and the drum sound module. Try swapping cables to rule out a faulty cable.
  • Module Settings: Verify that the correct input on your drum sound module is assigned to the PD-128 and that the pad type is correctly configured.
  • Volume Levels: Check the volume settings on your drum module and any connected amplification.

Inconsistent Triggering or False Triggers

  • Head Tension: Ensure the mesh head tension is even and not too loose or too tight.
  • Mounting Stability: Confirm the V-Pad is securely mounted and not vibrating excessively.
  • Module Sensitivity: Adjust the sensitivity settings for the pad on your drum sound module.
  • Cross-talk: If other pads are triggering when you strike the PD-128, adjust the cross-talk settings on your drum module.

Specifications

FeatureDetail
ModelPD-128
Pad Size12 inches
TriggeringDual (Head, Rim)
Head MaterialMesh
Included Components2-way mount holder, 2 triggers (Head, Rim)
Dimensions (L x W x H)31.5 x 16.73 x 17.17 inches
WeightApproximately 1 pound (16 ounces)
First Available DateJuly 18, 2012

Warranty and Support

For detailed warranty information, product registration, and technical support, please visit the official Roland website or contact your local Roland dealer. Keep your purchase receipt as proof of purchase.

Online Resources: www.roland.com

© 2023 Roland Corporation. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.