Introduction
This manual provides instructions for the Dorcy 4 LED Mini Lantern (Model 41-3019). This product is a compact, battery-powered LED lantern designed for various lighting needs, including camping, emergencies, and general utility. Each pack contains three lanterns, each featuring 4 super bright 5mm LED bulbs for 360-degree light output and a run time of up to 70 hours.
Image: Front view of the Dorcy 4 LED Mini Lantern 3-pack in assorted colors, still in its clear retail packaging.
Setup: Battery Installation
- Unscrew the Base: Gently twist the bottom cap of the lantern counter-clockwise until it detaches.
- Insert Batteries: Insert four (4) AA batteries into the battery compartment, ensuring correct polarity (+/-) as indicated inside the compartment. The lanterns come with 12 AA batteries (4 per lantern).
- Secure the Base: Align the bottom cap with the lantern body and twist clockwise until it is securely fastened. Do not overtighten.
Image: Back view of the Dorcy 4 LED Mini Lantern 3-pack packaging, highlighting battery requirements.
Operating Instructions
- Power On/Off: Locate the dial switch on the side of the lantern. Turn the dial to the "ON" position to activate the LED light. Turn the dial to the "OFF" position to turn off the light.
- Using the Hanging Hook: The lantern features a built-in hang hook within its handle. To use, simply pull up the small hook component from the top of the handle. This allows the lantern to be suspended from various points, such as tent poles, branches, or hooks.
Image: A green Dorcy Mini Lantern illuminated, showing its compact design and side switch.
Image: A blue Dorcy Mini Lantern, highlighting its 360-degree light output.
Image: A red Dorcy Mini Lantern, showcasing its built-in hanging hook.
Maintenance
- Cleaning: Wipe the lantern with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: When the light dims or fails to turn on, replace all four AA batteries. Follow the battery installation steps outlined in the "Setup" section. Always use fresh batteries and dispose of old batteries responsibly.
- Storage: If storing the lantern for extended periods, remove the batteries to prevent leakage and corrosion. Store in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lantern does not turn on. | Batteries are dead or incorrectly installed. | Replace batteries with new ones, ensuring correct polarity. |
| Light is dim. | Batteries are low. | Replace batteries with new ones. |
| Lantern flickers. | Loose battery connection or low batteries. | Check battery connections; replace batteries if necessary. |
Specifications
- Model Number: 41-3019
- Light Source Type: Light Emitting Diode (LED)
- LEDs per Lantern: 4 (5-millimeter)
- Light Output: 40 Lumens (Maximum)
- Power Source: Battery Powered
- Battery Type: AA
- Number of Batteries: 4 AA batteries required per lantern (12 total included in 3-pack)
- Battery Life: Up to 70 Hours
- Material: Plastic
- Colors: Assorted (Red, Blue, Yellow, Purple, Green, Clear)
- Mounting Type: Tabletop Mount, Hanging Hook
- Water Resistance Level: Not Water Resistant
- Item Dimensions (L x W x H): 1"L x 1"W x 1"H (per lantern)
- Item Weight: 0.1 Pounds (per lantern)
- Manufacturer: Dorcy International
Warranty Information
This Dorcy product is covered by a 1-year warranty against manufacturer defects. For warranty claims or further assistance, please contact Dorcy International customer support.
Support
For additional support, product inquiries, or to report an issue, please visit the official Dorcy website or contact their customer service department. Keep your product model number (41-3019) handy when seeking support.
Dorcy Official Website: Visit the Dorcy Store on Amazon