1. Introduction
The Ubbink VacuProCleaner Maxi is a powerful, multifunctional wet and dry vacuum cleaner designed for efficient cleaning of ponds and swimming pools. Its robust 1250-1400 W motor and stable housing ensure a long service life for both indoor and outdoor maintenance. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your VacuProCleaner Maxi.
2. Safety Instructions
Please read all safety instructions carefully before operating the appliance. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Always disconnect the appliance from the power supply before cleaning or performing maintenance.
- Do not operate the vacuum cleaner with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not vacuum flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Ensure all filters are correctly installed before use.
- Use only Ubbink recommended attachments.
- Store the appliance indoors in a dry place.
3. Package Contents
Carefully unpack the box and ensure all items are present and undamaged. If any parts are missing or damaged, contact your retailer.
- Ubbink VacuProCleaner Maxi unit
- Side brush
- Dusting brush
- Filter
- Crevice tool
- Transparent suction nozzle for ponds and pools
- Flexible hose
- Extension tubes (if applicable)
- Wheels for mobility
4. Product Overview
The Ubbink VacuProCleaner Maxi is engineered for versatility and durability. It features a powerful motor and a large 35-liter container, making it suitable for extensive cleaning tasks. The transparent suction nozzle provides clear visibility during pond and pool cleaning, allowing you to monitor the debris being collected.
Image: The Ubbink VacuProCleaner Maxi, a robust wet and dry vacuum cleaner with a large collection tank and wheels for easy transport.
Key features include:
- Powerful Motor: 1250-1400 W for strong suction.
- Large Capacity: 35-liter container for extended cleaning without frequent emptying.
- Wet and Dry Functionality: Suitable for various cleaning tasks, from liquid spills to dry debris.
- Automatic and Manual Modes: Choose the operating mode based on your cleaning needs.
- Transparent Suction Nozzle: Provides visibility for effective pond and pool cleaning.
- Mobility: Mounted on wheels for easy movement.
- HEPA Filter: Ensures efficient filtration of fine particles.
5. Setup
Follow these steps for initial assembly and preparation of your VacuProCleaner Maxi:
- Unpack Components: Remove all parts from the packaging and check against the 'Package Contents' list.
- Attach Wheels: Securely attach the wheels to the base of the vacuum unit for mobility.
- Install Filter: For dry vacuuming, ensure the HEPA filter is correctly installed. For wet vacuuming, remove the HEPA filter and ensure the foam filter (if supplied) is in place, or follow specific instructions for wet use without a HEPA filter to prevent damage.
- Connect Hose: Attach the flexible hose to the suction inlet on the main unit. Ensure it is firmly secured.
- Attach Accessories: Select the appropriate attachment (e.g., transparent suction nozzle, crevice tool, brushes) for your cleaning task and connect it to the end of the hose.
- Power Connection: Plug the power cord into a suitable 230 Volt electrical outlet.
6. Operating Instructions
The VacuProCleaner Maxi offers both automatic and manual operation modes.
6.1. Dry Vacuuming
- Ensure the HEPA filter is clean and correctly installed.
- Select the appropriate dry vacuuming attachment (e.g., dusting brush, side brush).
- Turn on the appliance using the control panel.
- Move the nozzle over the surface to be cleaned.
6.2. Wet Vacuuming (Ponds/Pools)
- Remove the HEPA filter. Install the foam filter if provided for wet use, or ensure the float mechanism is clear to prevent water from reaching the motor.
- Attach the transparent suction nozzle for optimal visibility.
- Place the vacuum unit on a stable, level surface near the pond or pool.
- Submerge the suction nozzle into the water.
- Select either Automatic Mode or Manual Mode via the tactile control panel.
- In Automatic Mode, the vacuum will cycle on and off to allow the tank to fill and then drain.
- In Manual Mode, the vacuum operates continuously. Monitor the water level in the tank and switch off manually to empty.
- Guide the nozzle along the bottom and sides of the pond/pool to remove sludge, algae, and debris. The transparent nozzle allows you to see the cleaning progress.
- Ensure the discharge hose is directed to an appropriate drainage area or collection point.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your VacuProCleaner Maxi.
7.1. Emptying the Container
- For dry vacuuming, empty the container when it is full or suction power decreases.
- For wet vacuuming, the unit will automatically drain in automatic mode. In manual mode, switch off the unit and open the drain valve to empty the collected water and debris.
7.2. Filter Cleaning and Replacement
- HEPA Filter: For dry use, regularly clean the HEPA filter by tapping it gently to dislodge dust or by rinsing it under cold water (allow to dry completely before re-installation). Replace the HEPA filter periodically, depending on usage.
- Foam Filter (for wet use): Rinse the foam filter with clean water after each wet use and allow it to air dry.
7.3. General Cleaning
- Wipe the exterior of the vacuum cleaner with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Clean all attachments and hoses after use, especially after wet vacuuming, to prevent blockages and odors.
8. Troubleshooting
If you encounter issues with your VacuProCleaner Maxi, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Reduced suction power | Clogged filter, blocked hose/nozzle, full container | Clean or replace filter. Check hose and nozzle for blockages and clear them. Empty the container. |
| Motor does not start | No power supply, damaged power cord/plug, safety switch activated | Check power connection and outlet. Inspect power cord for damage. If damaged, contact service. Ensure the unit is properly assembled and safety switches are not tripped. |
| Water leaks from unit | Improperly sealed container lid, damaged seals, drain valve open/loose | Ensure the container lid is securely fastened. Check seals for damage and replace if necessary. Close or tighten the drain valve. |
| Unit switches off automatically (wet use) | Container is full, float mechanism activated | This is normal operation in automatic mode. Empty the container. Check if the float mechanism is stuck. |
If the problem persists after attempting these solutions, please contact Ubbink customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | 8711465791182 |
| Brand | Ubbink |
| Dimensions (L x W x H) | 34 x 35 x 55 cm |
| Weight | 10.5 kg |
| Power (Watts) | 1250-1400 W |
| Voltage | 230 Volts |
| Capacity | 35 Liters |
| Special Feature | HEPA filter |
| Control Method | Tactile control panel |
| Recommended Use | All types of surfaces (wet and dry), ponds, pools |
| Color | Black |
| Wireless | No |
| Portable | No (wheeled unit) |
10. Warranty and Support
Ubbink products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Ubbink website. For technical support, spare parts, or service inquiries, please contact your local Ubbink dealer or customer service department. When contacting support, please have your model number (8711465791182) and proof of purchase readily available.
