1. Introduction
The simplehuman Fragrance Free Liquid Hand Soap Refill Pouch provides an optimal consistency for simplehuman soap pumps and sensor pumps. This fragrance-free, biodegradable hand soap effectively cleans hands without harmful ingredients. The large 34 fl. oz. (1L) resalable refill package is designed for quick and easy topping up of your soap pump, minimizing spills and mess.
Figure 1: simplehuman Fragrance Free Liquid Hand Soap Refill Pouch. This image displays the white, flexible pouch with a spout at the top left. The simplehuman logo is vertically aligned on the right side. The front label indicates "liquid hand soap," "fragrance free," "clear soap," and "34 fl. oz. (1L)," along with a "sensor pump friendly" icon.
2. Key Features
- Simple Formulation: A straightforward approach to hand soap with sensible ingredients.
- Fragrance-Free: Clear, neutral hand soap that is gentle on hands and rinses clean.
- Biodegradable & Hypoallergenic: Contains no toxins, parabens, or DEAs, making it environmentally friendly and suitable for sensitive skin.
- Sensor Pump Friendly: Specifically formulated to work seamlessly with simplehuman sensor pumps and other compatible dispensers.
- Easy-to-Pour Pouch: Designed for convenient and mess-free refilling of soap dispensers.
3. Setup Instructions
This refill pouch is designed for easy transfer of liquid hand soap into your existing dispenser. Follow these steps for a clean and efficient refill:
- Prepare Your Dispenser: Ensure your soap dispenser is clean and ready for refilling. If it's a simplehuman sensor pump, ensure it is turned off or in a stable position to prevent accidental dispensing.
- Open the Pouch: Locate the cap on the spout of the simplehuman refill pouch. Twist the cap counter-clockwise to remove it.
- Pour the Soap: Carefully position the spout over the opening of your soap dispenser. Slowly tilt the pouch to pour the liquid hand soap into the dispenser. The design of the pouch minimizes dripping.
- Close the Pouch: Once the desired amount of soap has been dispensed, twist the cap back onto the pouch clockwise until secure. This ensures the remaining soap stays fresh and prevents leaks.
- Clean Up: Wipe away any spilled soap from the dispenser or surrounding area.
Note: This liquid hand soap is formulated for simplehuman liquid soap pumps and sensor pumps. It is not intended for foaming soap dispensers unless diluted appropriately (see Troubleshooting section for more details).
4. Operating Instructions
Once your dispenser is refilled with simplehuman Fragrance Free Liquid Hand Soap, operate it as you normally would. For optimal hand hygiene, follow these general guidelines:
- Dispense Soap: Activate your soap dispenser to get a small amount of soap into your hands. For sensor pumps, simply place your hand under the sensor.
- Lather Hands: Rub your hands together vigorously with the soap, ensuring to cover all surfaces, including the backs of your hands, between your fingers, and under your nails. Lather for at least 20 seconds.
- Rinse Thoroughly: Rinse your hands under clean, running water until all soap residue is gone.
- Dry Hands: Dry your hands completely using a clean towel or air dryer.
5. Maintenance
Proper maintenance ensures the longevity of your soap and dispenser:
- Pouch Storage: Store the refill pouch in a cool, dry place away from direct sunlight. Ensure the cap is tightly sealed after each use to prevent contamination and maintain soap quality.
- Dispenser Cleaning: Regularly clean your soap dispenser according to its manufacturer's instructions. For simplehuman dispensers, wipe the exterior with a soft, damp cloth. Avoid using abrasive cleaners.
- Prevent Clogging: Using simplehuman liquid hand soap with simplehuman dispensers helps prevent clogging and ensures optimal pump performance.
6. Troubleshooting
Here are solutions to common issues you might encounter:
| Problem | Possible Cause / Solution |
|---|---|
| Soap not dispensing or dispensing slowly. |
|
| Soap is too thick for my foaming dispenser. | This simplehuman liquid hand soap is formulated for standard liquid soap pumps and sensor pumps, not foaming dispensers. If you wish to use it in a foaming dispenser, you may need to dilute it with water. Start with a small amount of soap and gradually add water, mixing thoroughly, until the desired consistency for foaming is achieved. Test the mixture before filling your dispenser completely. |
| Soap has an unexpected scent. | This product is fragrance-free. Any faint scent would be the natural smell of its ingredients. If you detect a strong or unusual odor, ensure the pouch was sealed properly and stored correctly. If the issue persists, contact customer support. |
7. Product Specifications
| Brand | simplehuman |
| Model Number | CT1012EF |
| Product Dimensions (L x W x H) | 3.5 x 6.9 x 9.6 inches |
| Item Weight | 2.2 Pounds |
| Volume | 34 fl. oz. (1 Liter) |
| Scent | Fragrance Free |
| UPC / GTIN | 838810014043, 838810015712 |
| Manufacturer | simplehuman |
8. Warranty and Support
For specific warranty information regarding simplehuman products, please refer to the official simplehuman website or the documentation provided with your simplehuman soap dispenser. This refill pouch is a consumable item.
For further assistance, product inquiries, or to explore other simplehuman products, please visit the official simplehuman store:
