Whirlpool W10446202 Appliance Touch-Up Paint User Manual

1. Introduction

This manual provides instructions for the proper use and care of your Whirlpool W10446202 Appliance Touch-Up Paint. This product is designed to cover minor nicks and scratches on various appliances, restoring their appearance. Please read all instructions carefully before use.

Image 1.1: Whirlpool W10446202 Appliance Touch-Up Paint bottle. The bottle is white and black, labeled "APPLIANCE BRUSH TOUCHUP W10446202 CHROME SHADOW 0.6 FL OZ 18 ML". A yellow measuring tape is visible in the foreground, indicating the small size of the bottle.

2. Safety Information

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

VAPOR HARMFUL: May affect the brain or nervous system causing dizziness, headache or nausea. Causes eye, skin, nose and throat irritation. May be harmful if absorbed through skin. Harmful if swallowed. Keep away from heat, sparks and flame. Vapors may cause flash fire. Do not smoke. Use only with adequate ventilation. Do not breathe vapors. Avoid contact with eyes, on skin or clothing.

First Aid:

• In case of eye contact: Flush immediately with plenty of water for at least 15 minutes and get medical attention.
• In case of skin contact: Wash thoroughly with soap and water. If you experience difficulty breathing, leave the area to obtain fresh air.
• If swallowed: Get medical attention.

KEEP OUT OF REACH OF CHILDREN.

Image 2.1: The reverse side of the touch-up paint bottle, displaying detailed safety warnings regarding harmful vapors, California Proposition 65 warning, first aid instructions, and the "Keep Out of Reach of Children" notice.

3. Product Overview

The Whirlpool W10446202 is an Original Equipment Manufacturer (OEM) touch-up paint designed for appliance surfaces. It comes in a 0.6 fl oz (18 mL) bottle with a brush applicator for precise application.

3.1. Compatible Brands and Models

This touch-up paint is compatible with appliances made by the following brands:

• Whirlpool
• KitchenAid
• JennAir
• Maytag
• Inglis
• Roper
• Amana
• Some Kenmore models that begin with 106, 110, 464, 465, 596, 629, 664, and 665.

Specific compatible models include, but are not limited to: WGD9500EW0, WTW9500EC0, WFW85HEFW1, WFW85HEFW0, WED92HEFW0, WED92HEFW2, WED92HEFW1, 11031312020, YWED5100HC0, YWED99HEDC0, 11031312021, YWED5100HC1, 11031312022, YWED5100HC2, YWED5100HC3, WGD8120HW0, WTW8120HC0, YWHD560CHW0, WTW8127LW1, YWHD560CHW1, YWHD560CHW2, WED90HEFC1, WED90HEFC2, MGD7020RW0, WED90HEFC0, 7MMVW7230LC0, YWED85HEFW2, YWED85HEFW0, YWED85HEFW1, WED8120HC0, WTW8500DR5, WED8500DR1, YNED5800DW2, WED8500DR3, WTW8500DR0, WED8500DR4, WED92HEFU2, WTW8500DR2, WED92HEFU1.

4. Preparation

1. Ensure Proper Ventilation: Work in a well-ventilated area to avoid inhaling harmful vapors. Open windows and doors, or use a fan.
2. Clean the Surface: Thoroughly clean the area to be touched up. Remove any dirt, grease, or loose paint particles. A clean, dry surface ensures optimal adhesion and a smooth finish.
3. Protect Surrounding Areas: Use painter's tape or masking paper to protect areas of the appliance that you do not wish to paint.
4. Shake Well: Before opening, shake the touch-up paint bottle vigorously for at least 30 seconds to ensure the paint is thoroughly mixed.

5. Application (Operating Instructions)

Follow these steps for applying the touch-up paint:

1. Open Carefully: Unscrew the cap slowly. The cap has an attached brush applicator.
2. Apply Thin Coats: Dip the brush into the paint, wiping off any excess on the rim of the bottle. Apply a very thin, even coat of paint to the scratch or nick. It is better to apply multiple thin coats than one thick coat.
3. Allow Drying Time: Allow each coat to dry completely before applying the next. Drying times may vary depending on humidity and temperature, but typically range from 15-30 minutes between coats.
4. Build Up Layers: Continue applying thin coats until the scratch or nick is adequately covered and the color matches the surrounding surface.
5. Clean Up: If any paint gets on unintended areas, wipe it off immediately with a damp cloth or appropriate solvent before it dries.

6. Care and Storage

• Recap After Use: Immediately recap the bottle tightly after each use to prevent the paint from drying out.
• Store Properly: Store the touch-up paint in a cool, dry place, away from direct sunlight, heat, sparks, and open flames. Ensure it is stored upright.
• Keep Out of Reach: Always store the product out of reach of children and pets.

7. Troubleshooting

If you encounter issues during or after application, consider the following:

• Uneven Application: This often occurs from applying too much paint at once. Try to apply thinner coats. If the paint is still wet, gently wipe off excess. If dry, light sanding with very fine grit sandpaper (if appropriate for the appliance surface) followed by another thin coat may help.
• Color Mismatch: While this is an OEM part, slight variations can occur due to appliance age, lighting, or previous fading. Ensure the area is clean and dry. If the mismatch is significant, contact Whirlpool customer support.
• Paint Drying Too Quickly/Slowly: Ensure you are working in an environment with moderate temperature and humidity. Extreme conditions can affect drying time.

8. Specifications

9. Customer Support

For further assistance, questions, or concerns regarding the Whirlpool W10446202 Appliance Touch-Up Paint, please contact Whirlpool Customer Service. Refer to your appliance's original documentation for specific contact information or visit the official Whirlpool website.

Whirlpool Corporation: Benton Harbor, MI 49022

Consumer Service Center: 1-800-253-1301