Upper Bounce 7' Indoor/Outdoor Classic Kiddy Trampoline & Safety Enclosure Set Instruction Manual

Introduction

This manual provides essential information for the safe assembly, operation, and maintenance of your Upper Bounce 7' Indoor/Outdoor Classic Kiddy Trampoline & Safety Enclosure Set. Please read all instructions carefully before use to ensure maximum safety and product longevity.

Important Safety Information

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

• Always supervise children using the trampoline.
• Only one person should use the trampoline at a time.
• Do not attempt or allow somersaults. Landing on the head or neck can cause serious injury, paralysis, or death.
• Inspect the trampoline before each use for worn or damaged parts. Replace any worn, defective, or missing parts immediately.
• Ensure the safety enclosure net is properly installed and secured.
• Do not use the trampoline when wet.

What's in the Box

Your Upper Bounce Trampoline & Safety Enclosure Set includes the following components:

• Round Trampoline Frame (Alloy Steel)
• Heavy Duty PP Mesh Material Jumping Mat
• Safety Enclosure Net
• High Quality and Durable Safety Pad with 3" Skirt Padding
• 36 Springs
• All necessary tools and hardware for assembly

Setup and Assembly

Follow these steps to assemble your trampoline. It is recommended to have at least two adults for assembly.

1. Assemble the Base Frame: Connect the curved frame sections to form the rectangular base. Ensure all connections are secure.
2. Attach Legs: Securely attach the trampoline legs to the assembled base frame.
3. Install Jumping Mat: Carefully lay the jumping mat inside the frame. Use the provided spring tool to attach the 36 springs, connecting the mat to the frame. Distribute the springs evenly to ensure proper tension.
4. Place Safety Pad: Cover the springs and frame with the safety pad, ensuring it is securely fastened around the entire perimeter.
5. Assemble Enclosure Poles: Connect the padded poles for the safety enclosure.
6. Install Safety Enclosure Net: Attach the safety enclosure net to the poles and secure it around the trampoline. Ensure the zippered entrance is functional and properly aligned.

Visual Guide for Components

Image: The fully assembled Upper Bounce 7-foot Trampoline with its safety enclosure net and blue safety pad.

Image: A close-up view of the durable zipper on the safety enclosure net, showing the secure closure mechanism.

Image: Detail of the top of a safety enclosure pole, featuring green foam padding and a secure tie-down for the net.

Operating Instructions

To ensure a safe and enjoyable experience, follow these operating guidelines:

• Always enter and exit the trampoline through the zippered opening of the safety enclosure.
• Ensure the enclosure net is fully zipped before jumping begins.
• Jump in the center of the mat for optimal bounce and stability.
• Avoid wearing shoes or sharp objects on the trampoline mat to prevent damage.

Maintenance

Regular maintenance will extend the life of your trampoline and ensure continued safety:

• Periodically check all nuts and bolts for tightness and tighten as necessary.
• Inspect the jumping mat, safety pad, and enclosure net for tears, holes, or deterioration. Replace damaged parts promptly.
• Clean the trampoline mat with mild soap and water. Avoid harsh chemicals.
• During winter months or prolonged periods of non-use, consider disassembling and storing the trampoline indoors to protect it from extreme weather conditions.

Specifications

Warranty and Support

This Upper Bounce product comes with a 1-Year Warranty. For warranty claims, replacement parts, or technical support, please contact Upper Bounce customer service. Refer to your purchase documentation for contact details or visit the official Upper Bounce website.