Introduction
The Orbit 3-Outlet Hose Watering Timer (Model 56082) is designed to automate your watering schedule, providing convenience and efficient water management for your lawn and garden. This digital timer transforms a standard hose faucet into a programmable sprinkler system, allowing for customized watering across multiple zones.
Front view of the Orbit 3-Outlet Hose Watering Timer, showing the digital display, control buttons, and rotary dial.
Setup
1. Battery Installation
The timer requires two (2) AA batteries for operation. To install, locate the battery compartment on the back of the unit. Open the compartment, insert the batteries, ensuring correct polarity, and close the cover securely. The timer retains programmed settings even when batteries are changed.
Rear view of the Orbit timer, highlighting the battery compartment and product information.
2. Connecting the Timer to Faucet
Attach the timer to a standard outdoor hose faucet. The timer features a swivel connection for quick and secure attachment without the need for additional tools. Ensure the connection is tight to prevent leaks. Connect your hoses or watering devices to the three outlets at the bottom of the timer. Each outlet can be controlled independently.
The Orbit timer securely connected to an outdoor hose faucet, ready for use.
3. Swivel Coupling and Filter
The swivel coupling includes a filter to prevent debris from entering the timer and your watering system. Periodically check and clean this filter to ensure optimal water flow and timer performance.
A close-up view of the swivel coupling, showing the integrated filter for debris prevention.
Operating Instructions
The Orbit timer features a large, easy-to-read dial and LCD screen for straightforward programming.
The timer's oversized dial and digital display for ease of use.
1. Setting the Clock
Rotate the dial to 'SET CLOCK'. Use the '+' and '-' buttons to adjust the current time. Press 'MANUAL/CLEAR' to confirm.
2. Setting Start Time
Rotate the dial to 'START TIME'. Use the '+' and '-' buttons to set your desired watering start time. You can set multiple start times for each zone.
3. Setting Watering Duration ('HOW LONG')
Rotate the dial to 'HOW LONG'. Use the '+' and '-' buttons to set the watering duration for each zone, from 1 to 240 minutes (4 hours). Each of the three zones can be programmed independently.
The timer display showing a set watering duration.
4. Setting Watering Frequency ('HOW OFTEN')
Rotate the dial to 'HOW OFTEN'. Use the '+' and '-' buttons to set the watering frequency. Options range from every 6 hours up to once every 7 days. This allows for precise control over your watering schedule.
The timer display indicating various watering frequency options.
5. Manual Watering
To manually water without interrupting your programmed schedule, press the 'MANUAL/CLEAR' button. You can then select the zone and duration for immediate watering. This is useful for quick spot watering or testing your system.
6. Rain Delay
The built-in rain delay feature allows you to pause your watering schedule for 24, 48, or 72 hours. To activate, rotate the dial to 'AUTO' and press the '+' button. This helps conserve water during periods of natural rainfall.
The timer displaying the rain delay function, allowing users to pause watering cycles.
Maintenance
The Orbit Hose Faucet Timer is constructed with durable, weather-resistant materials for long-lasting performance. To ensure its longevity:
- Winterization: In freezing conditions, disconnect the timer from the faucet and store it indoors to prevent damage from ice expansion.
- Cleaning: Periodically wipe down the exterior with a damp cloth. Ensure the swivel connection filter is free of debris.
- Battery Replacement: Replace batteries annually or when the low battery indicator appears on the display.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Timer not turning on/off as programmed | Low batteries; Incorrect programming; Water pressure issues. | Replace batteries; Re-check and adjust program settings; Ensure adequate water pressure from faucet. |
| No water flow from outlets | Faucet not fully open; Clogged filter; Timer valve stuck. | Fully open the faucet; Clean the swivel connection filter; Try manual watering to unstick valve. |
| Leaking from connections | Loose connections; Worn washers. | Tighten all connections; Replace worn rubber washers in hoses and timer connections. |
| Display is blank or dim | Dead or low batteries. | Replace batteries immediately. |
Specifications
- Model Number: 56082
- Color: Green
- Material: Plastic
- Product Dimensions: 3.88"D x 10.5"W x 10.75"H
- Item Weight: 1.85 Pounds
- Number of Settings: 5 (Set Clock, Start Time, How Long, How Often, Auto/Off)
- Power Source: 2 AA batteries (required)
- Watering Frequency: Every 6 hours up to every 7th day
- Watering Duration: 1 to 240 minutes
- Rain Delay Options: 24, 48, or 72 hours
- Maximum Operating Pressure: 100 PSI
- Operating Temperature: Do not use with water exceeding 120°F (49°C). Keep from freezing.
Warranty and Support
This Orbit Hose Watering Timer comes with a 6-year warranty, ensuring long-term reliability and peace of mind. For detailed information on warranty coverage or to access additional support resources, please refer to the official documentation or contact Orbit customer service.
- User Guide (PDF): Download User Guide
- User Manual (PDF): Download User Manual
- Visit the Orbit Store: Orbit Official Store on Amazon
